Beko 5kg Washing Machine Manual

The Beko 5kg Washing Machine is a front-loading, energy-efficient appliance designed for household laundry. It features multiple wash programs, a 5kg capacity, spin speeds up to 1200 RPM, delay timer, child lock, quick wash option, and energy-saving modes. This manual covers safety instructions, installation, program selection, daily use, maintenance, and troubleshooting to ensure optimal performance and longevity.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent drawer, filter, drain hose, and power cord.

FeatureDescription
Capacity5kg (dry laundry weight)
Spin SpeedUp to 1200 RPM (adjustable)
Energy ClassA+++ (energy efficient)
ProgramsCotton, Synthetic, Quick Wash, Delicate, Wool, etc.
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
DisplayLED digital display with time remaining
Door LockAutomatic during operation
Water InletCold & hot water connections
Noise LevelLow noise operation (approx. 50-70 dB)

Installation

Unpack and inspect contents. Place on a level, solid floor.

  1. Remove transit bolts: Use wrench to remove bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold/hot water taps (if applicable).
  3. Connect drain hose: Place in standpipe or sink (max height 100 cm).
  4. Level the machine: Adjust feet to ensure stability; use spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before first use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on: Plug in and press power button.
  2. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
  3. Set preferences: Use settings menu to adjust beep volume, default spin speed, etc.
  4. Load detergent: Fill detergent drawer compartments as per instructions.

CAUTION! Ensure water connections are tight to prevent leaks. Check drain hose is not kinked.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTION buttons (e.g., Extra Rinse, Pre-wash), SPIN SPEED, TEMPERATURE, DELAY START.

Display Icons: Door lock, child lock, spin, temperature, time remaining, program phase.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Quick Wash (30 min), Delicate, Wool, Hand Wash, Rinse+Spin, Drain Only. Settings: Adjust spin speed (0-1200 RPM), temperature (cold to 90°C), delay start (1-24h). Child Lock: Press and hold specific buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual inlet). Drain: Secure hose to standpipe or sink.

  1. Turn off water taps before connecting hoses.
  2. Use supplied hoses; do not reuse old ones.
  3. Ensure drain hose is not submerged (to prevent siphoning).
  4. Check for leaks after first connection.

Tip: Install a drip tray if placing on wooden floors. Use hose clips for secure connections.

Using Wash Programs

Follow load guidelines: Do not exceed 5kg dry weight.

  1. Sort laundry: By color, fabric type, and soil level.
  2. Load machine: Distribute evenly; do not overload.
  3. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
  4. Select program: Turn selector knob to desired program.
  5. Adjust options: Set temperature, spin speed, extra rinse if needed.
  6. Start: Press START/PAUSE; door locks automatically.
  7. After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not open door during wash; wait until unlock symbol disappears. Remove coins/objects from pockets.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically engages during operation. Overflow Protection: Stops water if level is too high. Imbalance Control: Reduces spin speed if load is uneven. Thermal Cut-out: Prevents overheating.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

  1. Detergent drawer: Remove and rinse under warm water.
  2. Door seal: Wipe with damp cloth to remove lint/residue.
  3. Filter: Locate at front bottom; turn counterclockwise to remove; clean under running water.
  4. Drum: Run empty hot wash (90°C) with washing machine cleaner monthly.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners on surfaces.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label: A+++. Manufactured under ISO 9001 quality standards. For support, visit www.beko.com or contact local service center. Disposal: Follow WEEE regulations; do not dispose with household waste.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug; ensure door is closed properly; press START.
No water intakeTaps/hoses/filterOpen water taps; check hose for kinks; clean inlet filter.
Water leakageHoses/connectionsTighten hose connections; check drain hose position.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; re-level machine; redistribute load.
Poor washing resultsDetergent/loadingUse correct detergent amount; do not overload; select proper program.
Error codes (e.g., E01)Various faultsConsult manual error code list; unplug for 5 mins then retry.

Reset: Unplug for 5 minutes, then restart. For persistent errors, contact service.

Service: Check warranty card; contact authorized Beko service center.

Beko 5kg Washing Machine Manual © - All Rights Reserved 2025