Beko 7kg Washing Machine Manual

The Beko 7kg Washing Machine is a front-loading appliance designed for efficient home laundry, featuring a 7kg capacity, multiple wash programs, energy-saving technology, child lock, delay start, and spin speed adjustments. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Hose, Power Cord.

FeatureDescription
Capacity7kg (dry laundry weight)
Wash ProgramsMultiple programs for cotton, synthetics, delicate, quick wash, etc.
Spin SpeedAdjustable up to 1200 rpm
Energy RatingA+++ for energy efficiency
Child LockPrevents accidental program changes
Delay StartProgram start delay up to 24 hours
Detergent DispenserCompartments for pre-wash, main wash, fabric softener
DisplayLED display showing time, program, and settings
Door LockAutomatic door lock during operation
Rinse HoldOption to pause before final spin

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
  3. Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
  4. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Power on machine; run initial empty wash.

  1. Check connections: Ensure water and drain hoses are secure.
  2. Select program: Turn dial to "Cotton" and press Start without laundry.
  3. Add detergent: Pour 100ml of detergent into main wash compartment.
  4. Run cycle: Let complete to clean drum and remove residues.
  5. Set preferences: Adjust default spin speed, temperature if needed via settings.

CAUTION! Do not load laundry during first wash. Keep children away during installation.

Specifications

Controls and Settings

Control Panel: Program Dial, Start/Pause, Temperature, Spin Speed, Delay Start, Option Buttons.

Program Selection: Turn dial to desired program (Cotton, Synthetics, etc.). Temperature: Adjust with Temp button (30°C to 90°C). Spin Speed: Adjust with Spin button (0 to 1200 rpm). Delay Start: Press Delay to set start time (1-24 hours). Child Lock: Press and hold Start + Spin for 3 seconds to enable/disable.

Display: Shows remaining time, selected program, temperature, spin speed, and delay time.

Connecting Water Supply

Cold water connection standard; hot water optional.

  1. Turn off water taps before connecting hoses.
  2. Attach inlet hoses to machine valves (blue for cold, red for hot).
  3. Connect other ends to water taps; ensure washers are fitted.
  4. Open taps slowly; check for leaks.
  5. Place drain hose in standpipe (max height 100cm) or over sink edge.

Tip: Use only provided hoses; do not overtighten connections.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Open door, load evenly up to 7kg; close door firmly.
  2. Add detergent: Pour into correct compartments (pre-wash, main, softener).
  3. Select program: Turn dial (e.g., Cotton for normal loads).
  4. Adjust settings: Set temperature, spin speed, delay if needed.
  5. Start: Press Start/Pause; door locks automatically.
  6. Pause/Stop: Press Start/Pause to pause; press again to resume. Hold to cancel.
  7. End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during wash; wait for unlock signal. Do not exceed max load.

Safety Features

Child Lock: Locks control panel to prevent changes. Door Lock: Auto-locks during operation; unlocks at end. Overflow Protection: Stops water if level too high. Imbalance Control: Reduces spin speed if load uneven.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep ventilation openings clear.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Energy label: A+++. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug; ensure door closed properly; press Start firmly.
No water intakeTaps/hosesEnsure taps open; check hose for kinks; clean inlet filter.
Water doesn't drainDrain hoseCheck for blockages; ensure hose not too high; clean pump filter.
Excessive vibrationTransit bolts/loadEnsure transit bolts removed; redistribute laundry evenly.
Error codes on displayVarious faultsRefer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes; plug back in.

Service: 0333 207 9710; www.beko.com

Beko 7kg Washing Machine Manual © - All Rights Reserved 2025