beko 8kg condenser tumble dryer manual

The Beko 8kg Condenser Tumble Dryer is a freestanding appliance designed for efficient and gentle drying of laundry. It features an 8kg capacity, multiple drying programs for different fabric types, a condenser drying system that doesn't require external venting, a reversible door, child lock, anti-crease function, and a water tank that collects condensation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Drum, Reversible Door, Lint Filter, Condenser Unit, Water Tank, Power Cord.

Installation

Unpack and inspect contents. Place on a stable, level, and dry floor.

1. Remove transit bolts: Locate and remove all bolts at the rear with supplied tool.
2. Position dryer: Ensure at least 5cm clearance at back and sides for ventilation.
3. Level the appliance: Adjust feet to prevent vibration and noise.
4. Connect to power: Plug into a grounded 220-240V, 50Hz outlet. Do not use an extension cord.
5. Check water tank: Ensure empty and correctly inserted.

WARNING! The dryer is heavy; use two people for lifting. Never install behind a lockable door or in a room with temperatures below 5°C.

First-Time Setup

Before first use, run an empty drying cycle to remove any residues.

1. Clean lint filter: Remove, rinse under water, dry, and reinsert.
2. Select a program: Turn the program selector to "Cottons" with high heat.
3. Start empty cycle: Press Start and let it run for 10-15 minutes, then cancel.
4. Set door direction (optional): Follow instructions in manual to reverse door hinge.
5. Familiarize with controls: Review program chart and function buttons.

CAUTION! Ensure the water tank is empty and lint filter is clean before first use.

Specifications

• Model Type: Condenser Tumble Dryer.
• Capacity: 8kg.
• Energy Class: As per energy label (e.g., A+++).
• Programs: Cottons, Synthetics, Delicates, Wool, Quick Dry, Anti-Crease, etc.
• Power Supply: 220-240V ~ 50Hz.
• Power Consumption: Varies by program (see energy label).
• Dimensions (HxWxD): Approximately 85cm x 60cm x 60cm.
• Weight: Approximately 40kg.
• Drying Technology: Condenser with heat pump (on specific models).
• Noise Level: dB(A) re 1 pW (as per specifications).

Controls and Settings

Access via Control Panel. Main components: Program Selector Knob, Start/Pause Button, Option Buttons (e.g., Child Lock, Delay Start, Anti-Crease), Display.

Program Selector: Choose from Cottons (high heat), Synthetics (medium heat), Delicates (low heat), Wool (special care), Quick Dry (30-60 min), Anti-Crease (tumble without heat).

Options: Child Lock (press and hold for 3 seconds), Delay Start (set 1-24 hours), Anti-Crease (activates after cycle), Acoustic Signal (on/off). Display: Shows remaining time, selected options, and error codes.

Connecting to Utilities

Only electrical connection required for condenser models.

1. Ensure power outlet is grounded, 220-240V, 50Hz, and rated for the dryer's current (typically 10A).
2. Plug directly into wall outlet. Do not use an adapter or extension cord.
3. For water drain (optional on some models): Connect hose to drain outlet if continuous draining is preferred over using the tank.

Tip: Check your home's electrical system can handle the load. The dryer should be on its own circuit if possible.

Using Drying Programs

Designed for different fabric types and drying needs.

1. Load laundry: Do not exceed 8kg. Mix small and large items for better tumbling.
2. Select program: Turn knob to match fabric type (e.g., Cottons for towels).
3. Set options: Press Delay Start, Child Lock, or Anti-Crease as needed.
4. Start cycle: Press Start/Pause. The display will show remaining time.
5. At cycle end: Acoustic signal sounds. Remove laundry promptly to minimize wrinkles.
6. Empty water tank: After every cycle, pull out, empty, and reinsert the tank.
7. Clean lint filter: Remove lint after every cycle to maintain efficiency.

WARNING! Do not dry items contaminated with flammable substances (gasoline, oil). Do not overload the drum.

Safety Features

Child Lock: Locks control panel. Door Safety Switch: Stops drum when door is open. Overheat Protection: Thermostat cuts power if temperature exceeds safe limit. Filter Clean Indicator: Alerts when lint filter needs cleaning.

Care & Cleaning

Unplug before cleaning. Clean exterior with damp cloth. Regular maintenance is crucial.

1. Lint Filter: Clean after EVERY cycle. Remove, rinse, dry, reinsert.
2. Water Tank: Empty after EVERY cycle. Clean monthly with mild detergent.
3. Condenser Unit (accessible behind filter housing): Clean every 1-3 months depending on use. Rinse under tap to remove lint buildup.
4. Drum: Wipe with damp cloth if needed. Leave door ajar after use to ventilate.

CAUTION! Never use abrasive cleaners, scouring pads, or solvents. Do not spray water directly onto the appliance.

Regulatory Information

This appliance complies with relevant EU Directives and UK regulations. The symbol indicates separate collection for electrical waste (WEEE). Do not dispose of with household waste. For disposal, contact local authorities or the retailer. Manufactured for the European and UK markets. For support, visit www.beko.co.uk or contact the Beko helpline.

Troubleshooting

Reset: Unplug from power for 5 minutes to reset electronic controls.

Service: Contact Beko Customer Support or an authorized service agent. Do not attempt repairs yourself.