Beko B300 Dishwasher Manual

The Beko B300 is a freestanding dishwasher featuring a 12-place setting capacity, energy efficiency class A, 6 wash programs (including Intensive, Eco, and Quick Wash), half-load option, adjustable upper basket, salt and rinse aid indicators, child lock, delay start timer (up to 24 hours), and acoustic signal. Designed for standard kitchen installation with dimensions 60x60x85 cm (WxDxH). Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Upper and lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet and drain hoses.

Feature	Description
12-place setting capacity	Holds up to 12 standard place settings
6 wash programs	Includes Intensive, Eco, Quick, Normal, Glass, and Rinse
Half-load option	Reduces water and energy for smaller loads
Adjustable upper basket	Height adjustable for taller items
Salt and rinse aid indicators	LED alerts for refilling
Child lock	Prevents accidental program changes
Delay start timer	Program start delay up to 24 hours
Acoustic signal	Audible end-of-cycle signal
Energy class A	High energy efficiency rating
Water consumption	Approx. 10-12 liters per cycle (Eco program)

Installation

Unpack and inspect contents. Ensure installation area is level and near water/drain connections.

Position dishwasher: Place in desired location, ensuring 5cm clearance at rear and sides.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Route to sink drain or standpipe (min height 40cm, max 100cm).
Level the appliance: Adjust feet to ensure stability.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Only use specified hoses; do not kink or bend sharply. Ensure power cord is not trapped.

First-Time Setup

Before first use, remove transport locks and prepare the dishwasher.

Remove packaging: Take off all tape and protective films.
Set water hardness: Adjust salt dispenser setting based on local water hardness.
Fill salt container: Add 1kg of special dishwasher salt (first use requires 1 liter of water in container).
Fill rinse aid: Pour into dispenser until MAX indicator.
Run initial cycle: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher salt and rinse aid; table salt will damage the appliance.

Specifications

Model: Beko B300
Type: Freestanding dishwasher
Capacity: 12 place settings
Dimensions (WxDxH): 60 x 60 x 85 cm
Voltage/Frequency: 220-240V, 50Hz
Power Consumption: 0.78 kWh (Eco program)
Water Consumption: 10-12 liters (Eco program)
Noise Level: 49 dB(A)
Wash Programs: 6 programs + 4 temperature options
Special Features: Half-load, delay start, child lock, adjustable basket

Controls and Settings

Control Panel: ON/OFF button, Program selector, Delay start, Half-load, Child lock, Start/Pause.

Program Selection: Turn knob to desired program. LED display shows remaining time.

Settings: Delay start (1-24 hours), Half-load (activates for upper basket only), Child lock (press 3 seconds to activate/deactivate). Salt refill indicator lights when salt container is empty. Rinse aid indicator lights when dispenser needs refilling.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues (no pre-rinsing required).
Load lower basket: Pots, pans, plates, bowls (facing center).
Load upper basket: Glasses, cups, saucers, small plates.
Cutlery basket: Place knives, forks, spoons with handles down.
Adjust upper basket: Lift to higher position for tall items.
Ensure spray arms rotate freely and items don't block them.

Tip: Do not overload; leave space between items for water circulation.

Using Wash Programs

Select program based on soil level and dish type.

Program	Temperature	Use For	Duration
Intensive	70°C	Heavily soiled pots, pans	120 min
Eco	50°C	Normally soiled dishes	180 min
Quick	45°C	Lightly soiled, quick wash	30 min
Normal	65°C	Daily use, mixed load	105 min
Glass	40°C	Glassware, delicate items	90 min
Rinse	Cold	Rinse only, no detergent	15 min

Operation: Add detergent to dispenser, select program, press Start. Door locks automatically during cycle.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filter weekly: Remove lower basket, twist and lift out filter, rinse under water.
Clean spray arms monthly: Check for blockages, rinse under water.
Wipe door seals: Clean with damp cloth to prevent mold.
Descale monthly: Run empty cycle with dishwasher cleaner or vinegar.
Check salt and rinse aid: Refill as indicated by LED lights.

CAUTION! Unplug before maintenance. Never use abrasive cleaners or sharp objects.

Safety Information

Read all instructions before installation and use.

Connect to grounded outlet only.
Do not open door during hot wash cycles (risk of scalding).
Keep children away from open dishwasher and detergent.
Use only dishwasher detergent (hand soap damages appliance).
Do not wash items soiled with flammable substances.
Disconnect power before servicing.

WARNING! Detergents are corrosive; keep away from children and skin.

Regulatory Information

CE marked: Complies with European Directives. Energy label: Class A according to EU regulation 1059/2010. Waste disposal: Dispose according to local regulations; contact municipal waste facility. Manufacturer: Beko PLC, Turkey. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply/door	Check plug, fuse, circuit breaker; ensure door closed properly.
Poor cleaning results	Loading/detergent	Check loading; use correct detergent amount; clean filter.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height correct.
Leaking water	Door seal/hose	Check door seal for debris; tighten hose connections.
Noise during operation	Spray arm/items	Ensure spray arms rotate freely; check for loose items touching arms.
Salt indicator stays on	Salt container empty	Refill salt container; check water hardness setting.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; do not attempt repairs yourself.