Beko B300 Washing Machine Manual

The Beko B300 is a front-loading washing machine with a 7kg capacity, featuring multiple wash programs, energy efficiency class A+++, spin speed up to 1400 RPM, delay timer, child lock, and anti-allergy cycle. It includes automatic load detection, imbalance control, and aquastop leak protection. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent drawer, filter, drain pump, and adjustable feet.

Feature	Description
Capacity	7kg laundry load
Energy Class	A+++ (most efficient)
Spin Speed	Up to 1400 RPM
Programs	Cotton, Synthetic, Delicate, Quick Wash, Anti-Allergy, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Aquastop	Automatic water shut-off in case of leak
Imbalance Control	Reduces vibration during spin
Automatic Load Detection	Adjusts water and energy usage
Display	LED with time remaining and cycle indicators

Installation

Unpack and inspect contents. Place on a level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Level the machine using a spirit level; tighten lock nuts.
Connect water supply: Attach inlet hose to cold water tap (3/4” thread).
Connect drain hose: Place in standpipe or sink (max height 1m).
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press POWER button.
Run empty wash: Select Cotton 90°C program without laundry.
Set language: Press and hold START/PAUSE and SPIN buttons for 3 seconds to select language.
Load laundry: Sort by fabric type and color.
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).

CAUTION! Overloading reduces wash efficiency. Follow load guidelines.

Specifications

Model: Beko B300
Capacity: 7kg (dry weight)
Dimensions (HxWxD): 85cm x 60cm x 60cm
Voltage/Frequency: 230V~50Hz
Power Consumption: 2100W (heating)
Water Pressure: 0.5-10 bar
Programs: 15 including Eco 40-60, Wool, Hand Wash
Noise Level: 53 dB (wash), 75 dB (spin)
Weight: 68kg
Certifications: CE, RoHS, WEEE

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR knob, START/PAUSE, OPTION buttons (Delay, Extra Rinse, Pre-wash), SPIN SPEED button, TEMPERATURE button.

Display: Shows program time, spin speed, temperature, delay time, and error codes.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, Quick 30', etc.). Options: Press to activate Extra Rinse, Pre-wash, or Delay (1-24h). Temperature: Select from Cold, 30°C, 40°C, 60°C, 90°C. Spin Speed: Choose from No Spin, 400, 600, 800, 1000, 1200, 1400 RPM. Child Lock: Press and hold DELAY and EXTRA RINSE for 3 seconds.

Connecting Water & Drain

Water Inlet: Cold fill only (hose supplied). Drain: Hose diameter 19mm, max length 1.5m.

Ensure water tap is off before connecting hose.
Secure hose with clamp; do not overtighten.
Drain hose must not be kinked or submerged.
Check for leaks after first connection.

Tip: Use a drain hose extension if needed; ensure proper slope for drainage.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7kg; distribute evenly.
Add detergent: Use correct compartment; follow dosage instructions.
Select program: Turn knob (e.g., Cotton for towels/bedding).
Set options: Temperature, spin speed, extra functions.
Start: Press START/PAUSE; door locks automatically.
Pause/change: Press START/PAUSE to stop; wait 2 minutes to unlock door.
End of cycle: Signal sounds; door unlocks after a short delay.

WARNING! Do not open door during high-temperature washes. Wait for cool-down.

Special Functions

Delay Timer: Set 1-24 hours delay start. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled items. Anti-Allergy: Heats water to 60°C to remove allergens. Quick 30': Fast wash for lightly soiled loads. Silent Mode: Reduces spin speed for quiet operation (selectable in settings).

Care & Cleaning

Monthly maintenance ensures longevity.

Clean detergent drawer: Remove and rinse under warm water.
Clean filter: Turn off power; open filter cover at front; remove debris.
Clean drum: Run Cotton 90°C program empty with washing machine cleaner.
Wipe door seal: Remove lint and residue; leave door ajar after use.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Regulatory Information

EU Ecodesign Directive compliant. Conforms to EN 60456 performance standards. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug; ensure door is closed properly; press START/PAUSE.
No water intake	Tap/hose/filter	Open water tap; check hose for kinks; clean inlet filter.
Excessive vibration	Transit bolts/load	Ensure transit bolts removed; redistribute laundry; level feet.
Water not draining	Drain hose/filter	Check hose for blockages; clean pump filter.
Error code E01	Water inlet fault	Check water supply; restart machine.
Error code E02	Drain fault	Clear drain hose; check pump filter.
Detergent not dissolving	Drawer compartment	Use correct compartment (II for main wash); use powder/liquid as directed.

Reset: Unplug for 5 minutes to reset electronics.

Service: 0333 207 9710; www.beko.com