Beko BPRO500 Washing Machine Manual

The Beko BPRO500 is a front-loading washing machine with a 5kg capacity, featuring multiple wash programs, energy efficiency, child lock, delay start, and a digital display. It is designed for household use with standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, Digital Control Panel, Detergent Drawer, Water Inlet Valves, Drain Pump, Adjustable Feet, Power Cord.

Installation

Unpack and inspect contents. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn to level machine; use spirit level to check.
3. Connect water supply: Attach inlet hoses to hot/cold taps (if available) and machine inlets.
4. Connect drain hose: Place in standpipe or sink (max height 100cm).
5. Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Power on: Plug in and press Power button.
2. Run empty wash: Select "Cotton 90°C" program without laundry and start to clean drum.
3. Set preferences: Use Settings button to adjust buzzer volume, default spin speed, etc.
4. Load detergent: Fill drawer compartments as per detergent instructions.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

• Model: Beko BPRO500
• Capacity: 5kg
• Max Spin Speed: 1200 RPM
• Water Pressure: 0.5 - 10 bar
• Programs: 15 programs including Cotton, Eco, Quick, Delicate, Wool, Spin, Rinse
• Power Supply: 220-240V, 50Hz
• Energy Consumption: 0.75 kWh per cycle (Cotton 60°C)
• Water Consumption: Approx. 45 liters per cycle (Cotton 60°C)
• Noise Level: Wash: 56 dB, Spin: 76 dB
• Weight: 62kg

Controls and Settings

Control Panel: POWER button, Program Dial, Start/Pause, Delay Start, Child Lock, Extra Rinse, Pre-wash, Spin Speed, Temperature.

Program Dial: Turn to select desired wash program. LED indicators show selected options.

Settings Menu: Press and hold Settings button for 3 seconds to access: Buzzer On/Off, Default Spin Speed, Temperature Adjustment, End of Cycle Signal. Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate (prevents accidental changes). Delay Start: Press to set start time (1-24 hours).

Connecting Water & Drain

Water Inlet: Connect hoses to hot/cold taps (red/blue markings). Drain: Secure hose to standpipe or sink edge.

1. Ensure taps are off before connecting hoses.
2. Use only supplied hoses; do not overtighten.
3. Drain hose must not be kinked or submerged.
4. After connections, open taps slowly and check for leaks.

Tip: Install a drip tray or leak detector for added safety.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Open door, load evenly, do not overload.
2. Add detergent: Pour into correct drawer compartment (II for main wash).
3. Select program: Turn dial (e.g., Cotton, Synthetic, Quick 30').
4. Adjust options: Press Spin Speed, Temperature, Extra Rinse as needed.
5. Start: Press Start/Pause; display shows time remaining.
6. Pause/Stop: Press Start/Pause to pause; turn dial to "Stop" to cancel.
7. After cycle: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not wash items contaminated with petrol, solvents, or chemicals. Remove coins, keys from pockets.

Special Functions

Delay Start: Set start time (1-24h) for convenient washing. Child Lock: Locks control panel. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled loads. Rapid Wash: Reduces cycle time for lightly soiled loads.

Care & Cleaning

Monthly maintenance recommended.

1. Clean detergent drawer: Pull out, rinse under tap, dry and reinsert.
2. Clean door seal: Wipe with damp cloth to remove lint/residue.
3. Clean filter: Locate at front bottom right; turn counterclockwise to open; remove debris.
4. Run maintenance cycle: Use "Drum Clean" program or Cotton 90°C empty wash monthly.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or high-pressure water.

Regulatory Information

CE Mark: Complies with European safety and EMC directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle appropriately. Manufacturer: Beko PLC. For support, visit www.beko.com or contact local service center.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.