beko condenser sensor dryer manual

The Beko Condenser Sensor Dryer is an energy-efficient tumble dryer featuring sensor drying technology, multiple drying programs, a condenser system that collects moisture in a removable tank, child lock, anti-crease function, and various fabric-specific cycles. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power and Ventilation 7. Using Drying Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LCD display, condenser unit, lint filter, water tank, drum light, and various sensors.

Feature	Description
Sensor Drying Technology	Automatically detects moisture levels for optimal drying time and energy use
Condenser System	Collects moisture into a removable water tank, no external venting required
Multiple Programs	Cotton, Synthetic, Delicate, Wool, Quick Dry, Anti-Crease, etc.
Child Lock	Locks control panel to prevent accidental changes
Anti-Crease Function	Tumbles clothes without heat at end of cycle to reduce wrinkles
Delay Start	Set drying to begin at a later time
Drum Light	Illuminates drum interior for easy loading/unloading
Filter Clean Indicator	Reminds user to clean the lint filter
Water Tank Full Indicator	Alerts when condensate tank needs emptying
Energy Rating	High energy efficiency class (e.g., A+++)

Installation

Unpack and inspect contents. Place on a stable, level floor near a power outlet and with adequate ventilation.

Remove transit bolts: Use supplied tool to remove bolts at the rear; keep for future moves.
Level the dryer: Adjust feet to ensure machine is stable and does not vibrate excessively.
Connect to power: Plug into a grounded 220-240V, 50Hz outlet. Do not use an extension cord.
Check ventilation: Ensure at least 5cm clearance on all sides for air circulation.

WARNING! The dryer is heavy; use two people for lifting. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first use, prepare the dryer and select initial settings.

Clean lint filter: Remove and rinse under water, dry completely before reinserting.
Check water tank: Ensure condensate tank is empty and correctly seated.
Run a test cycle: Select a short cotton program without laundry to remove any manufacturing residues.
Set preferences: Use control panel to set language, time, and other default options.

CAUTION! Do not use the dryer without cleaning the lint filter first. Ensure the water tank is empty.

Specifications

Capacity: 8 kg (dry laundry weight).
Energy Class: A+++ (most efficient).
Power Supply: 220-240V, 50Hz.
Power Consumption: Varies by program; see energy label.
Drying Technology: Condenser with heat pump (on selected models).
Programs: Cotton, Synthetics, Delicates, Wool, Quick Dry, Anti-Crease, Time Dry.
Noise Level: Approx. 65 dB during operation.
Dimensions (HxWxD): 85cm x 60cm x 60cm (typical).
Weight: Approx. 45 kg.

Controls and Settings

Access functions via the rotary selector and touch buttons on the control panel.

Control Panel: Rotary Program Selector, Start/Pause button, Option buttons (Delay, Child Lock, Anti-Crease, etc.), LCD Display.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic). Options: Adjust dryness level (Iron Dry, Cupboard Dry, Extra Dry), select Delay Start (1-24 hours), activate Child Lock (press and hold for 3 seconds), enable Anti-Crease. Display: Shows remaining time, selected options, and error codes.

Connecting to Power and Ventilation

Power: Grounded outlet only. Ventilation: Ensure adequate space around dryer.

Turn off power at mains before plugging in.
Plug directly into wall outlet; avoid adapters or extension cords.
Position dryer in a well-ventilated room (not a bathroom) to allow moisture dissipation.
For condenser models, ensure water tank is accessible for emptying.

Tip: Keep the area around the dryer clear of flammable materials and ensure the air intake grille is not blocked.

Using Drying Programs

Supports various fabric types and drying levels.

Load laundry: Do not overload; follow capacity guidelines.
Select program: Turn knob to match fabric (e.g., Cotton for towels).
Set options: Press option buttons for dryness level, delay, etc.
Start: Press Start/Pause. The sensor will adjust time automatically.
During cycle: You can pause to add or remove items.
End of cycle: Signal sounds; remove laundry promptly to reduce creasing.
Empty water tank: After each cycle, empty the condensate tank.
Clean lint filter: Clean filter before or after every cycle.

WARNING! Do not dry items contaminated with flammable substances. Ensure zippers are closed and pockets empty.

Maintenance & Cleaning

Regular maintenance ensures efficiency and longevity.

Daily/Weekly: Clean lint filter after every cycle. Empty water tank after each use. Monthly: Wipe door seal and drum with damp cloth. Check condenser unit (if accessible) for lint buildup. Annually: Inspect venting (if applicable) for blockages.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or solvents. Never pour water into the dryer.

Safety Features

Child Lock: Locks control panel. Door Safety Switch: Stops drum when door is open. Overheat Protection: Automatically cuts power if temperature exceeds safe limit. Filter Clean Reminder: Indicator alerts when lint filter needs cleaning.

Regulatory Information

Complies with EU directives for safety (EN 60335-2-11) and electromagnetic compatibility (EN 55014). Energy label according to EU Regulation 392/2012. Manufactured by Beko PLC. For support, visit www.beko.com or contact your local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Door not closed, power issue	Ensure door is firmly shut; check power outlet and fuse; press Start firmly.
Clothes still damp	Overloaded, wrong program, filter blocked	Reduce load; select correct program; clean lint filter and condenser.
Unusual noise	Foreign object in drum, transit bolts not removed	Stop dryer, check for coins/zippers; ensure transit bolts are removed.
Error code on display	Sensor fault, water tank full, overheating	Consult error code list in manual; empty water tank; let dryer cool down.
Water leakage	Water tank not seated, tank full	Ensure tank is correctly inserted; empty tank regularly.

Reset: Unplug for 5 minutes, then restart. If error persists, contact service.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.