Beko Condenser Tumble Dryer Manual

The Beko Condenser Tumble Dryer is a reliable and energy-efficient appliance designed for home use. It features multiple drying programs, a condenser system that collects moisture in a tank, child safety lock, anti-crease function, and various heat settings suitable for different fabric types. Below are key sections covering safety instructions, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, condenser unit, lint filter, water tank, drum light, and reversible door.

Installation

Unpack and inspect contents. Place on a stable, level surface.

1. Remove transit bolts: Located at the rear, use spanner to remove and keep for future moves.
2. Position dryer: Ensure at least 5cm clearance on all sides for ventilation.
3. Level the appliance: Adjust feet to prevent vibration and noise.
4. Connect to power: Plug into a grounded 220-240V, 50Hz outlet (do not use extension cord).
5. Check door swing: Configure hinge to left or right as needed.

WARNING! Dryer is heavy; use two people for lifting. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first use, prepare the dryer.

1. Clean lint filter: Remove and rinse under water, dry completely before replacing.
2. Check water tank: Ensure empty and correctly inserted.
3. Run empty cycle: Select a short program (e.g., Cotton) without load to remove any residues.
4. Set preferences: Use control panel to set clock, acoustic signal volume, and end-of-cycle tone.
5. Load laundry: Do not exceed maximum weight indicated for the program.

CAUTION! Ensure the dryer is level and all packaging materials are removed.

Specifications

• Model Type: Condenser Tumble Dryer.
• Capacity: 7kg / 8kg (depending on model).
• Energy Class: A++ (or as per model).
• Programs: Cotton, Synthetic, Delicate, Quick Dry, Anti-crease, Time Dry.
• Power Supply: 220-240V AC, 50Hz.
• Dimensions (HxWxD): Approximately 85cm x 60cm x 60cm.
• Weight: Approximately 40kg.
• Noise Level: Less than 70 dB.
• Condenser Tank Capacity: Typically 4-5 litres.

Controls and Settings

Access programs and settings via the control panel. Main buttons: POWER, START/PAUSE, PROGRAM SELECTOR, OPTIONS (e.g., Delay, Child Lock, Extra Dry).

Display: Shows selected program, remaining time, delay time, and error codes.

Program Selection: Turn knob to choose program (Cotton, Synthetic, etc.). Options: Press OPTIONS button to select Delay Start (1-24 hours), Child Lock (hold for 3 seconds), Anti-crease (tumbling without heat after cycle). Settings: Use combination buttons to set clock and acoustic signal volume.

Connecting to Power

Ensure proper electrical connection for safe operation.

1. Use dedicated outlet: 220-240V, 50Hz, properly grounded.
2. Avoid extension cords: Plug directly into wall socket.
3. Check voltage: Match dryer requirements (stated on rating plate).
4. Power on: Press POWER button; display will illuminate.

Tip: Ensure the socket is easily accessible and not behind the dryer.

Using Drying Programs

Supports various fabrics and drying needs.

1. Load laundry: Place items loosely in drum, do not overload.
2. Select program: Turn knob to desired program (e.g., Cotton for towels, Delicate for synthetics).
3. Set options: Press OPTIONS for Delay Start or Extra Dry if needed.
4. Start cycle: Press START/PAUSE; drying begins.
5. Monitor: Display shows remaining time; acoustic signal sounds at end.
6. Unload promptly: Remove items immediately to reduce creasing.
7. Empty water tank: After each cycle, remove and empty condenser tank.
8. Clean lint filter: Remove and clean filter before every cycle.

WARNING! Do not dry items contaminated with flammable substances. Ensure zippers are closed.

Safety Features

Child Lock: Activate to disable control panel. Overheat protection: Automatically stops heating if temperature exceeds safe limit. Door safety switch: Stops drum when door is opened. Filter alert: Reminds user to clean lint filter.

Care & Cleaning

Unplug before cleaning. Clean exterior with damp cloth; do not use abrasive cleaners.

1. Lint filter: Clean before every cycle; rinse under water monthly.
2. Condenser unit: Remove and clean every 1-2 months (refer to manual for steps).
3. Water tank: Empty after each cycle; clean with mild detergent occasionally.
4. Drum: Wipe with soft cloth; leave door open after use to air out.

CAUTION! Do not use steam cleaners; avoid water contact with electrical parts.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Copyright © Beko plc. All rights reserved. For support, visit www.beko.com or contact local service center.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com