Beko DFS04010S Slimline Dishwasher Manual

The Beko DFS04010S is a compact, slimline dishwasher designed for smaller kitchens or limited spaces. It features a 10-place setting capacity, energy-efficient A++ rating, multiple wash programs, delay start timer, child lock, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Cleaning 9. Error Codes & Diagnostics 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Spray Arms, Filter System, Cutlery Basket, Salt Container, Rinse Aid Dispenser, Drain Hose, Water Inlet Valve.

Feature	Description
Capacity	10 standard place settings
Energy Rating	A++ (Energy Efficient)
Water Consumption	Approx. 9.5 liters per cycle (Eco program)
Noise Level	49 dB (Quiet operation)
Programs	Eco, Intensive, Normal, Rapid, Glass, Pre-Rinse
Delay Start	1 to 24 hours
Child Lock	Prevents accidental program changes
Display	LED indicators for cycle progress, salt, rinse aid
Dimensions (HxWxD)	82 x 45 x 55 cm (Slimline design)
Water Pressure	0.5 - 10 bar

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

Positioning: Place on stable, level floor under counter or freestanding.
Water Connection: Connect inlet hose to cold water supply (max 90°C). Use new hose supplied.
Drain Connection: Connect drain hose to sink waste or standpipe (min height 40 cm, max 100 cm).
Electrical Connection: Plug into grounded 220-240V, 50Hz socket. Do not use extension cord.
Levelling: Adjust front feet to ensure machine is level.

WARNING! Installation must comply with local regulations. If unsure, consult a qualified technician.

First-Time Setup

Before first use, prepare the dishwasher.

Remove Transport Securing: Take out any transit bolts or brackets from rear.
Fill Salt Container: Unscrew cap, add 1 litre of water, then fill with dishwasher salt. Wipe away spills.
Fill Rinse Aid: Open dispenser, fill to MAX line with rinse aid. Close lid firmly.
Run Empty Cycle: Select Intensive program without dishes to clean interior.
Set Water Hardness: Use program button combination to set according to local water hardness (see manual).

CAUTION! Only use dishwasher salt in the salt container. Do not use table salt.

Specifications

Model: Beko DFS04010S
Type: Freestanding/Slimline Dishwasher
Capacity: 10 place settings
Energy Class: A++
Annual Energy Consumption: 237 kWh
Water Consumption (Eco): 9.5 litres
Noise Level: 49 dB(A)
Programs: 6 main programs + options
Power Supply: 220-240V ~ 50Hz
Input Power: 2000 W
Net Weight: Approx. 38 kg

Controls and Settings

Control Panel: ON/OFF button, Program Selection buttons, Delay Start, Child Lock, Start/Pause.

Program Guide:

Eco: Energy-saving for normally soiled dishes (approx. 3h).
Intensive: For heavily soiled pots/pans (70°C).
Normal: Daily wash for mixed load (65°C).
Rapid: Quick 30-minute wash for lightly soiled items.
Glass: Gentle wash for glasses/crystal (40°C).
Pre-Rinse: Rinse only to prevent drying of food residues.

Options: Delay Start (1-24h), Half Load (for fewer dishes), Extra Dry (increases drying temperature).

Loading the Dishwasher

For optimal results, load correctly.

Lower Basket: Plates, bowls, larger items. Face soiled surfaces inward toward spray arm.
Upper Basket: Glasses, cups, saucers, small bowls. Secure stemware in holders.
Cutlery Basket: Place knives, forks, spoons with handles down (except sharp knives). Mix types for better washing.
Do Not Overload: Ensure water can reach all surfaces. Items should not block spray arms.
Pre-rinse: Scrape off large food scraps; no need to pre-wash under tap.

Tip: Place delicate items in top basket, heavily soiled pots facing down in lower basket.

Using Detergents & Additives

Use only dishwasher-specific products.

Detergent: Fill main detergent dispenser (left side of door) with powder, tablet, or gel. Use amount per water hardness.
Pre-Wash Detergent: For heavily soiled loads, add small amount to pre-wash chamber (front of dispenser).
Rinse Aid: Automatically dispensed during final rinse. Refill when indicator light comes on.
Salt: Regenerates water softener. Refill when salt indicator illuminates.

WARNING! Do not mix different detergent types. Keep all products out of reach of children.

Care & Cleaning

Regular maintenance ensures performance and longevity.

Exterior: Wipe with damp cloth and mild detergent. Do not use abrasive cleaners.
Interior: Run empty hot wash occasionally with dishwasher cleaner or vinegar.
Filter: Clean coarse and fine filters weekly under running water to prevent clogging.
Spray Arms: Check for blockages in holes. Remove and rinse if necessary.
Door Seal: Wipe clean to prevent leaks and odors.

CAUTION! Unplug before any maintenance. Do not use steam cleaners.

Error Codes & Diagnostics

Display	Meaning	Action
E1	Water inlet problem	Check tap is on, hose not kinked, filter clean.
E2	Drainage problem	Check drain hose for kinks/blockages, standpipe height.
E3	Heating error	Cycle may continue at reduced temp. Contact service.
E4	Water overflow	Check float switch moves freely. Unplug and call service.
E5	Door open	Ensure door is properly closed and latched.
Salt Indicator	Salt low	Refill salt container.
Rinse Aid Indicator	Rinse aid low	Refill rinse aid dispenser.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal. Beko is a registered trademark. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check plug, fuse, door closed properly, child lock off.
Poor washing results	Loading, detergent, filter	Check loading, use correct detergent amount, clean filter.
Water not draining	Drain hose blocked	Check hose for kinks/blockages. Clean filter.
Noise during operation	Spray arm, foreign object	Check for items blocking spray arm. Remove any debris.
Leaking water	Door seal, hose connections	Check door seal for damage, ensure hoses are tight.
Dishes not dry	Rinse aid, program selection	Refill rinse aid, select program with drying option (e.g., Extra Dry).

Reset: Unplug for 5 minutes, then restart.

Service: For persistent issues, contact authorized Beko service: www.beko.com/support.