The Beko DIN15X20 is a 15-inch built-in dishwasher designed for seamless kitchen integration, featuring a stainless steel interior, multiple wash programs, energy-saving modes, adjustable racks, and a digital display. It requires a standard 120V electrical connection, hot water supply, and proper drainage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Stainless steel tub, adjustable upper rack, cutlery basket, digital control panel, detergent dispenser, rinse aid dispenser, inlet hose, drain hose, and mounting brackets.
| Feature | Description |
|---|---|
| Stainless Steel Interior | Corrosion-resistant and durable for long-term use |
| Digital Control Panel | LED display with touch buttons for program selection |
| Adjustable Upper Rack | Height adjustable to accommodate tall items |
| Cutlery Basket | Removable basket for utensils |
| Detergent Dispenser | Automatic release of detergent during wash cycle |
| Rinse Aid Dispenser | Adjustable dispenser for spot-free drying |
| Inlet Hose | Connects to hot water supply (included) |
| Drain Hose | Connects to sink drain or garbage disposal |
| Mounting Brackets | For securing dishwasher to countertop and cabinets |
| Energy Saving Mode | Reduces power and water consumption |
Before installation, verify you have the necessary tools and materials.
WARNING! Installation should be performed by a qualified technician. Ensure power and water are turned off before beginning.
Follow these steps for proper installation.
CAUTION! Do not kink water or drain hoses. Ensure dishwasher is level to prevent leaks and improper operation.
Control Panel located on top front of door.
Buttons: POWER, PROGRAM SELECT (Heavy, Normal, Eco, Rinse, Quick), DELAY START, HALF LOAD, RINSE AID, CHILD LOCK.
Display Icons: Cycle progress, time remaining, rinse aid level, error codes.
Settings: Program selection adjusts water temperature and cycle time. Delay Start allows programming up to 24 hours. Half Load reduces water usage for smaller loads. Rinse Aid indicator lights when dispenser is low. Child Lock prevents accidental program changes.
Proper connection of water, drain, and power is critical.
Tip: Apply plumber's tape to all threaded connections to prevent leaks.
For optimal cleaning results.
WARNING! Do not use regular dish soap. Do not open door during cycle as hot water may cause burns.
Regular maintenance ensures longevity.
CAUTION! Unplug dishwasher before performing any maintenance. Do not use abrasive cleaners on stainless steel interior.
This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Meets NSF/ANSI 184 for residential dishwashers. Energy Star certified. For support in the USA, contact Beko at 1-877-232-5636 or visit www.bekousa.com. Copyright © Beko 2023. All rights reserved.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Dishwasher won't start | Door not closed properly / No power | Ensure door is latched. Check circuit breaker and power cord connection. |
| Poor cleaning results | Spray arms blocked / Incorrect loading | Clean filter and spray arms. Rearrange dishes to allow water flow. |
| Water not draining | Drain hose clogged/kinked | Check drain hose for obstructions. Ensure high loop is properly installed. |
| Leaking water | Loose connections / Damaged door gasket | Tighten water connections. Inspect and clean door gasket; replace if damaged. |
| Unusual noise | Foreign object in pump / Improper leveling | Check lower area for debris. Adjust leveling feet until unit is stable. |
| Error code E1 displayed | Water inlet problem | Check water supply valve is open. Inspect inlet hose for kinks. |
Reset: Unplug for 5 minutes, then plug back in to reset control board.
Service: 1-877-232-5636; www.bekousa.com