Beko DIN15X20 Integrated Dishwasher Manual

The Beko DIN15X20 is a fully integrated dishwasher designed for standard 60cm kitchen units, featuring a 15-place setting capacity, energy-efficient A++ rating, multiple wash programs, delay start, half-load option, child lock, and salt/rinse aid indicators. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Integrated front panel, upper and lower baskets, cutlery basket, filter system, detergent dispenser, salt container, rinse aid dispenser, control panel with digital display.

Installation

Unpack and inspect contents. Ensure kitchen cabinet is prepared.

1. Position dishwasher: Slide into 60cm wide cabinet space, level using adjustable feet.
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Ensure proper drainage into sink or waste pipe (min height 40 cm).
4. Electrical connection: Plug into grounded 220-240V, 50Hz socket (10A fuse).
5. Secure door front: Attach custom cabinet panel to door using provided brackets.

WARNING! Dishwasher is heavy; use two people for handling. Ensure water and electrical connections are secure and leak-free.

First-Time Setup

Before first use, prepare the dishwasher.

1. Remove transport materials: Take out all interior packaging and transit bolts.
2. Fill salt container: Unscrew cap, add 1 liter of water, then fill with dishwasher salt (first use only).
3. Fill rinse aid dispenser: Open compartment, fill to MAX line with rinse aid.
4. Run empty cycle: Select Intensive program without dishes to clean interior.
5. Set water hardness: Use program button combination to match local water hardness (1-5).

CAUTION! Only use dishwasher salt in the dedicated container. Do not use table salt.

Specifications

• Model: DIN15X20
• Type: Fully Integrated
• Place Settings: 15 standard
• Programs: 6 main programs + options
• Power Supply: 220-240V, 50Hz, 10A
• Water Pressure: 0.03 - 1 MPa
• Dimensions (HxWxD): 82 x 59.8 x 55 cm
• Weight: Approx. 42 kg
• Warranty: 2 years parts and labor

Controls and Settings

Control Panel (behind door when opened): ON/OFF button, Program selector, Delay Start, Half Load, Start/Pause, Child Lock, Digital display with indicators.

Programs: Auto (55-65°C), Intensive (70°C), Eco (50°C), Quick (45°C, 30 min), Glass (40°C), Half Load (for fewer dishes).

Options: Delay Start (1-24h), Extra Dry (increases drying temperature), Child Lock (hold Start/Pause for 3 seconds).

Display Symbols: Salt indicator, Rinse Aid indicator, Program progress, Delay time, Child Lock active.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

1. Scrape off large food residues (no pre-rinsing needed).
2. Lower basket: Plates, pots, pans (face center).
3. Upper basket: Glasses, cups, small bowls (angled downward).
4. Cutlery basket: Forks and spoons handle down, knives handle up for safety.
5. Adjust upper basket height: Lift both sides to accommodate tall items below.
6. Ensure spray arms rotate freely; no items blocking them.

Tip: Do not overload. Place delicate items in upper basket only.

Using Detergents & Additives

Use only dishwasher-specific products.

1. Detergent: Fill main dispenser (powder or tablets). Use correct amount for water hardness and soil level.
2. Rinse Aid: Fill dispenser; adjust dosage level (1-6) via dial inside compartment.
3. Salt: Fill only in softener unit. Regenerates resin to prevent limescale.
4. Combined tablets: Can be used (3-in-1), but additional salt may still be needed in hard water areas.

WARNING! Do not use regular washing-up liquid. It causes excessive foaming and damage.

Care & Maintenance

Regular maintenance ensures longevity.

1. Clean filter: Twist and lift out filter assembly weekly, rinse under tap.
2. Clean spray arms: Remove and check for blockages monthly.
3. Wipe door seals: Use damp cloth to remove debris.
4. Descale: Run empty cycle with dishwasher cleaner every 2-3 months in hard water areas.
5. Exterior: Wipe control panel and door with soft, damp cloth.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners or solvents.

Error Codes

Regulatory Information

CE marked. Complies with EU Directives for Low Voltage, EMC, and Ecodesign. WEEE symbol: Do not dispose with household waste. For disposal, contact local authorities. Manufactured by Beko PLC. Copyright © 2025 Beko. All trademarks are property of their respective owners. For support, visit www.beko.com or contact your local service center.

Troubleshooting

Reset: Turn off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service: 0333 207 9710 (UK) or local agent.