The Beko BDFN15420B is a 15-inch built-in dishwasher with 14 place settings, energy class A, 7 wash programs, half-load option, adjustable upper basket, salt and rinse aid indicators, delay start timer, child lock, and AquaIntense technology for intensive cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filters, spray arms.
| Feature | Description |
|---|---|
| Capacity | 14 place settings |
| Energy Class | A (energy efficient) |
| Wash Programs | 7 programs including Intensive, Eco, Quick, Glass |
| Half Load Option | Reduces water and energy for smaller loads |
| Adjustable Upper Basket | Height adjustable for taller items |
| Salt & Rinse Aid Indicators | LED indicators for refill reminders |
| Delay Start Timer | Program start delay up to 24 hours |
| Child Lock | Prevents accidental program changes |
| AquaIntense Technology | Enhanced spray system for tough stains |
| Digital Display | Shows remaining time and program status |
Unpack and inspect contents. Ensure installation area is level and near water/drain connections.
WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks and hazards.
Before first use, prepare the dishwasher.
CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.
Control Panel: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.
Program Selection: Press repeatedly to cycle through programs (Intensive, Eco, Quick, Glass, Delicate, Auto). Delay Start: Set delay from 1 to 24 hours. Half Load: Reduces water and energy when loading only one basket. Child Lock: Press and hold for 3 seconds to activate/deactivate. Digital Display: Shows selected program, remaining time, salt/rinse aid indicators.
Proper loading ensures optimal cleaning.
Tip: Do not overload; ensure water can reach all surfaces.
Select program based on soil level and dish type.
To start: Close door, select program, press START/PAUSE. To pause: Press START/PAUSE during cycle; press again to resume.
Regular maintenance ensures longevity.
CAUTION! Unplug before maintenance. Do not use abrasive cleaners.
Read all instructions before use.
WARNING! Risk of electric shock if used improperly. Do not immerse in water.
CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Dishwasher not starting | Door not closed properly/power issue | Ensure door is latched; check power cord is plugged in; circuit breaker not tripped. |
| Poor cleaning results | Spray arms blocked/incorrect loading | Clean spray arms; rearrange dishes; use correct detergent amount. |
| Water not draining | Drain hose blocked/filter clogged | Check drain hose for kinks; clean filter; ensure drain height 40-100 cm. |
| Leaking water | Door seal damaged/hose loose | Check door seal for debris/damage; tighten water inlet connections. |
| Salt indicator flashing | Salt container empty | Refill with dishwasher salt; run short cycle to flush. |
| Unusual noise | Foreign object in pump/spray arm | Check for small objects in pump; ensure spray arms rotate freely. |
Reset: Unplug for 5 minutes, then restart. If problem persists, contact service.
Service: Contact authorized Beko service center. Do not attempt repairs yourself.