beko dishwasher BDFN15420S manual

The Beko BDFN15420S is a 15-place setting freestanding dishwasher with an A++ energy rating, featuring 6 wash programs, a digital display, half-load function, adjustable upper basket, salt and rinse aid indicators, and a delay start timer. It operates on a standard 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, adjustable upper basket, cutlery basket, filter system, salt and rinse aid dispensers, inlet and drain hoses.

Feature	Description
Digital Display	Shows program time, settings, and error codes
6 Wash Programs	Includes Intensive, Eco, Quick, Glass, Delicate, and Auto
Half-Load Function	Reduces water and energy for smaller loads
Adjustable Upper Basket	Can be raised/lowered for taller items
Salt & Rinse Aid Indicators	Lights alert when refills are needed
Delay Start Timer	Program start delay from 1 to 24 hours
Child Lock	Prevents accidental program changes
A++ Energy Rating	High energy efficiency
15 Place Settings	Capacity for standard dinnerware sets
Acoustic Signal	Beeps when program ends

Installation

Unpack and inspect contents. Position near water supply, drain, and power outlet.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place into sink or standpipe (min height 40 cm, max 100 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Plug into grounded power outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt dispenser: Remove lower basket, unscrew cap, add 1 kg of special dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open flap on door, fill compartment with rinse aid until MAX mark.
Run empty wash: Select Intensive program without dishes to clean interior and remove manufacturing residues.
Set water hardness: Use program buttons to set level according to local water hardness (see manual table).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding dishwasher.
Capacity: 15 place settings.
Energy Rating: A++.
Water Consumption: Approx. 10 liters per Eco cycle.
Power Consumption: Approx. 0.95 kWh per Eco cycle.
Programs: 6 main programs + options.
Noise Level: 49 dB(A).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Access controls via digital panel on door front.

Buttons: POWER ON/OFF, PROGRAM SELECTION (Intensive, Eco, Quick, Glass, Delicate, Auto), DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Icons: Program duration, delay time, salt/rinse aid refill indicators, child lock, end signal.

Settings: Water hardness (1-5), acoustic signal on/off, rinse aid dosage (1-5).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: For plates, pots, pans. Place items facing center.
Upper basket: For glasses, cups, small bowls. Can be adjusted in height.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Do not block spray arms. Ensure items are secure and not touching.

Tip: Refer to loading diagrams in manual for best results.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Load dishes and add detergent to dispenser.
Select program: Press PROGRAM button until desired program lights up.
Add options: Press HALF LOAD for smaller loads, DELAY START to set timer.
Start: Close door firmly, press START/PAUSE. Program begins.
After completion: Wait for acoustic signal. Open door slightly to let steam escape, then unload.

WARNING! Use only dishwasher detergent. Do not use regular soap.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Twist and lift out filter assembly weekly, rinse under tap.
Clean spray arms: Check for blockages monthly, remove and rinse.
Wipe door seals: Use damp cloth to remove debris.
Descale: Run empty with a dishwasher cleaner every 2 months if in hard water area.
Check salt/rinse aid: Refill when indicators light.

CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Door not closed/power	Ensure door is firmly closed; check power outlet and fuse.
Poor washing results	Filter/loading/detergent	Clean filter; reload dishes properly; use fresh detergent.
Water not draining	Drain hose blocked/kinked	Check hose for kinks; clean filter; ensure standpipe height is correct.
Error code E1	Water inlet problem	Check water tap is on; inspect inlet hose for kinks; clean inlet filter.
Error code E3	Water leakage detected	Turn off water and power; check hoses and internal tub for leaks.
Salt indicator stays on	Salt empty/incorrect setting	Refill salt dispenser; check water hardness setting.

Reset: Turn off power for 5 minutes, then restart.

Service: Consult manual for error codes; contact authorized Beko service if problem persists.