The Beko BDFN26420SQ is a 24-inch built-in dishwasher featuring 14 place settings, 7 wash programs, delay start, half-load option, child lock, AquaIntense technology for intensive cleaning, adjustable upper basket, stainless steel interior, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent and rinse aid dispensers, spray arms, filters, and inlet/drain connections.
| Feature | Description |
|---|---|
| Capacity | 14 place settings |
| Wash Programs | 7 programs including Intensive, Eco, Quick, Glass, etc. |
| Delay Start | Programmable delay up to 24 hours |
| Half Load | Option for washing fewer dishes to save water/energy |
| Child Lock | Safety lock to prevent accidental program changes |
| AquaIntense | Technology for powerful cleaning on intensive program |
| Adjustable Upper Basket | Height adjustable for taller items |
| Stainless Steel Interior | Durable and resistant to stains/odors |
| Digital Display | Shows program status, time remaining, and errors |
| Energy Rating | Energy-efficient operation |
Unpack and inspect contents. Ensure proper electrical and plumbing connections.
WARNING! Installation must comply with local codes. Use only recommended hoses and fittings.
Before first use, run a wash cycle without dishes.
CAUTION! Ensure door is securely closed before starting any cycle.
Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.
Programs: Intensive (heavy soil), Eco (energy saving), Quick 30' (light soil), Glass (fragile items), Auto (sensor-based), Rinse (rinse only), Prewash (preliminary wash).
Settings: Adjust water hardness (1-5), rinse aid level (1-5), acoustic signal on/off, reset to factory defaults.
Proper loading ensures optimal cleaning and prevents damage.
Tip: Refer to loading diagrams in manual for optimal arrangement.
Select program based on soil level and dish type.
WARNING! Use only dishwasher-safe items. Plastic items on upper rack only.
Regular maintenance ensures longevity and performance.
CAUTION! Unplug before any maintenance. Do not use abrasive cleaners.
Read all safety instructions before use.
This appliance complies with FCC Part 15 and relevant safety standards. Copyright © Beko. All trademarks are property of their respective owners. For support, visit www.bekousa.com or contact 1-877-793-8962.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Dishwasher not starting | Power supply, door not closed | Check plug/power; ensure door is securely closed. |
| Poor cleaning results | Overloading, incorrect detergent | Load properly; use recommended detergent; clean filters. |
| Water not draining | Drain hose clogged/kinked | Check hose for obstructions; ensure proper installation. |
| Leaking water | Door seal damaged, overfilling | Inspect seal; ensure no overloading; check inlet valve. |
| Unusual noise | Spray arm hitting dishes, foreign object | Rearrange load; check for small objects in pump area. |
| Error code on display | Various faults | Refer to error code chart in manual; reset if needed. |
Reset: Unplug for 1 minute, then plug back in.
Service: 1-877-793-8962; www.bekousa.com