Beko Dishwasher BDFN26420WA Manual

The Beko BDFN26420WA is a 24-inch built-in dishwasher with 14 place settings, 7 wash programs, delay start, child lock, half load option, and energy-efficient operation. It features stainless steel interior, adjustable upper rack, foldable tines, and soil sensor technology. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, stainless steel tub, adjustable upper rack, cutlery basket, detergent dispenser, rinse aid dispenser, and soil sensor.

Feature	Description
Place Settings	14 standard place settings capacity
Wash Programs	7 programs including Intensive, Eco, Quick, Glass, etc.
Delay Start	Programmable delay timer up to 24 hours
Child Lock	Safety lock to prevent accidental program changes
Half Load Option	Energy-saving wash for smaller loads
Adjustable Upper Rack	Height adjustable for taller items
Foldable Tines	Flexible rack design for various dish sizes
Soil Sensor	Automatically adjusts water and energy usage
Digital Display	Shows remaining time, program, and status
Energy Rating	Energy Star certified for efficiency

Installation

Unpack and inspect contents. Ensure proper electrical and plumbing connections.

Position dishwasher: Place in prepared cabinet opening (24-inch standard).
Connect water supply: Attach hot water line (120°F recommended) to inlet valve.
Connect drain hose: Route to sink drain or garbage disposal with high loop.
Electrical connection: Plug into grounded 120V, 15A dedicated outlet.
Level the unit: Adjust front leveling legs for stability.

WARNING! Installation must comply with local codes. Disconnect power before installation.

First-Time Setup

Before first use, run a complete cycle without dishes.

Remove shipping materials: Check interior for foam blocks or tape.
Fill rinse aid: Open dispenser, fill to MAX line, close securely.
Add detergent: Use recommended dishwasher detergent in main dispenser.
Select program: Choose Intensive wash and start cycle.
Set water hardness: Adjust setting in control panel if needed.

CAUTION! Use only dishwasher-specific detergents and rinse aids.

Specifications

Dimensions: 23.6" W x 24" H x 24" D (built-in).
Capacity: 14 place settings.
Water Consumption: 2.9 gallons per cycle (Eco program).
Energy Consumption: 0.87 kWh per cycle (Eco program).
Noise Level: 49 dBA.
Water Pressure: 20-120 psi required.
Voltage: 120V AC, 60Hz.
Power: 1200W heating element.
Wash Programs: Intensive, Auto, Eco, Quick, Glass, Rinse, Half Load.
Special Features: Delay start, child lock, soil sensor, adjustable racks.

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, CHILD LOCK, START/PAUSE.

Programs: Intensive (heavily soiled), Auto (soil sensor), Eco (energy saving), Quick (58 min), Glass (delicate), Rinse (rinse only), Half Load (small loads).

Settings: Water hardness (adjust via button combination), rinse aid level (1-5), sound on/off. Delay Start: Set 1-24 hours. Child Lock: Press and hold for 3 seconds to enable/disable.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food particles (no pre-rinsing needed).
Lower rack: Place plates, pots, pans facing center.
Upper rack: Adjust height if needed for tall glasses.
Cutlery basket: Mix items, place handles down (except sharp knives).
Check spray arms: Ensure they rotate freely after loading.

Tip: Do not overload; water must reach all surfaces.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Fill main dispenser (check for pre-wash compartment if needed).
Select program: Press PROGRAM button to cycle through options.
Optional settings: Set delay start or half load if desired.
Start: Close door firmly, press START/PAUSE.
During cycle: Display shows remaining time; door locks automatically.
After cycle: Wait for heat dry to complete; open door slightly to vent steam.

WARNING! Do not open door during hot wash phases; steam can cause burns.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Monthly: Clean filter assembly (remove, rinse under water).
Spray arms: Check for clogs, clean holes with toothpick.
Door seal: Wipe with damp cloth to remove debris.
Interior: Run empty cycle with dishwasher cleaner monthly.
Exterior: Clean with mild soap and damp cloth.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically locks during wash cycles. Overflow Protection: Float switch stops water if detected. Thermal Cut-off: Prevents overheating.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check power cord; ensure door closed securely; child lock off.
Poor cleaning results	Loading/filter	Check spray arms for blockage; clean filter; use correct detergent.
Water not draining	Drain hose	Check for kinks; ensure proper installation with high loop.
Leaking water	Door seal/detergent	Check door seal for debris; use correct amount of detergent.
Unusual noise	Spray arm/items	Ensure spray arms rotate freely; check for dishes touching arms.
Error codes displayed	Various faults	Refer to manual error code chart; reset by turning power off/on.

Reset: Turn power off at breaker for 1 minute, then restore.

Service: 1-866-332-8456; www.bekousa.com