Beko Dishwasher BDFN26420XA Manual

The Beko BDFN26420XA is a 24-inch built-in dishwasher with 14 place settings, 7 wash programs, energy-efficient operation, AquaIntense technology for stubborn stains, Half Load option, adjustable upper basket, delay start timer, child lock, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filters, spray arms.

Feature	Description
Wash Programs	7 programs including Intensive, Eco, Quick, Glass, etc.
Capacity	14 place settings
AquaIntense Technology	Enhanced spray for difficult stains
Half Load Option	Economical wash for fewer dishes
Delay Start	Timer up to 24 hours
Child Lock	Prevents accidental program changes
Adjustable Upper Basket	Height adjustable for larger items
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Energy Rating	A++ energy efficiency class
Noise Level	49 dB (quiet operation)

Installation

Unpack and inspect contents. Ensure proper electrical and water connections.

Position dishwasher: Place in cabinet cutout (24-inch width).
Connect water supply: Attach inlet hose to cold water tap (max pressure 10 bar).
Connect drain hose: Ensure proper drainage into sink or waste pipe.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by a qualified technician. Ensure water and electrical connections are secure to prevent leaks or shock.

First-Time Setup

Before first use, prepare the dishwasher.

Remove shipping materials: Take out all tapes and protective parts from interior.
Fill salt container: Add dishwasher salt to softener unit (use only special salt).
Fill rinse aid: Pour rinse aid into dispenser (adjust dosage as needed).
Run initial wash: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust softener according to local water hardness.

CAUTION! Use only dishwasher-specific salt and rinse aid. Do not use regular table salt.

Specifications

Model: BDFN26420XA
Type: Built-in dishwasher
Place Settings: 14 standard sets
Programs: 7 wash programs
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Power Supply: 220-240V, 50Hz
Dimensions (HxWxD): 82 x 59.8 x 55 cm
Weight: 38 kg
Noise Level: 49 dB

Controls and Settings

Control Panel: ON/OFF button, program selector, delay start, half load, child lock, start/pause.

Programs: Intensive (70°C), Eco (50°C), Quick (58°C), Glass (40°C), Auto, Hygiene, Rinse.

Settings: Delay start (1-24 hours), half load (for upper basket only), child lock (press and hold for 3 seconds), salt indicator (lights when refill needed), rinse aid indicator (lights when refill needed).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Place plates, bowls in lower basket facing center.
Glasses, cups in upper basket (angled downward).
Cutlery in basket with handles down (except knives).
Adjust upper basket height for tall items.
Ensure spray arms rotate freely.

Tip: Do not overload. Place delicate items in upper basket away from heating element.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press ON/OFF button.
Load detergent: Add powder or tablet to dispenser.
Select program: Turn selector to desired program.
Add options: Press half load or delay start if needed.
Start: Press start/pause button.
Program ends: Display shows "End" and beeps.
Unload: Wait a few minutes after cycle to avoid steam burns.

WARNING! Use only dishwasher detergent. Do not use regular soap. Keep door closed during operation.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove and rinse under water weekly.
Clean spray arms: Check for clogs monthly.
Wipe door seals: Clean with damp cloth.
Descale: Run empty cycle with vinegar or descaler every 2 months.
Refill salt and rinse aid: When indicators light.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all safety instructions before use.

Connect to grounded outlet only.
Do not open door during wash cycle (hot water/steam risk).
Keep children away from open dishwasher.
Do not wash items soiled with flammable substances.
Disconnect power before servicing.

WARNING! Risk of electric shock if improperly installed or maintained.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label: A++ rating. For support, visit www.beko.com or contact local service center. Serial number located on door edge. Keep for warranty claims.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power supply/door	Check plug; ensure door closed properly; check circuit breaker.
Poor cleaning results	Loading/detergent	Check spray arms for blockage; use correct detergent amount; ensure proper loading.
Water not draining	Drain hose/filter	Check hose for kinks; clean filter; ensure drain height correct.
Noise during operation	Foreign objects	Check for small items in pump or spray arms.
Salt indicator on	Salt empty	Refill salt container; run short program to dissolve salt.
Leaking water	Hose connections	Tighten inlet/drain hoses; check door seal for damage.

Reset: Turn off and unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.