Beko Dishwasher BDFN26420XQ Manual

The Beko BDFN26420XQ is a 60cm wide, freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and 48 dB noise level. It features 6 wash programs (including Auto, Intensive, Eco, and Quick), a half-load option, adjustable upper basket, salt and rinse aid indicators, delay timer, child lock, and AquaIntense technology for improved cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Spray arms, Filters, Detergent dispenser, Salt container, Rinse aid dispenser, Upper and lower baskets, Cutlery basket.

Feature	Description
Capacity	14 standard place settings
Energy Rating	A++ (Energy Label)
Noise Level	48 dB
Wash Programs	6 programs including Auto, Intensive, Eco, Quick, Glass, and 90 Min
Half Load Option	Reduces water and energy for smaller loads
Delay Timer	Program start delay up to 24 hours
Child Lock	Locks control panel during operation
AquaIntense	Special spray technology for better cleaning performance
Salt & Rinse Aid Indicators	LED indicators for low levels
Adjustable Upper Basket	Height adjustable in two positions

Installation

Unpack and inspect contents. Ensure location is level, near water inlet, drain, and power outlet.

Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or dedicated drain pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure dishwasher is stable and level.
Connect to power: Plug into a grounded 220-240V, 50Hz socket.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, remove transport safety materials and prepare the water softener.

Fill salt container: Open cap, pour in 1 kg of special dishwasher salt, then fill with water until it overflows.
Fill rinse aid dispenser: Open lid, pour rinse aid up to "MAX" mark, close lid.
Run initial cycle: Select an intensive program without dishes to clean interior and remove manufacturing residues.
Set water hardness: Use the program button combination to set level according to local water hardness.

CAUTION! Only use salt specifically designed for dishwashers. Do not use table salt.

Specifications

Model: BDFN26420XQ
Type: Freestanding
Width: 60 cm
Capacity: 14 place settings
Energy Consumption: 0.93 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Programs: 6 main programs, 4 options
Power Supply: 220-240V ~ 50Hz
Inlet Water Pressure: 0.03 - 1 MPa
Net Weight: Approximately 44 kg

Controls and Settings

Access programs and options via the control panel on the top of the door.

Program Buttons: Auto, Intensive, Eco, Quick, Glass, 90 Min.

Option Buttons: Half Load, Delay Start (1-24h), Extra Dry, Child Lock.

Indicators: Salt (red), Rinse Aid (green), End of cycle.

Program Selection: Press desired program button; corresponding LED will light.

Starting: Press and hold Start/Pause for 3 seconds to begin selected program.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues; no need to pre-rinse.
Lower basket: For pots, pans, plates, and larger items.
Upper basket: For glasses, cups, saucers, and smaller plates. Height adjustable.
Cutlery basket: Place knives, forks, spoons with handles down for safety.
Ensure items do not block spray arms or detergent dispenser.

Tip: Place heavily soiled items facing the center where water spray is strongest.

Using Detergents & Additives

Use only detergents and additives specifically designed for dishwashers.

Detergent: Fill main wash compartment in dispenser with powder, liquid, or tablet. Use amount according to water hardness and soil level.
Rinse Aid: Automatically dispensed during final rinse to improve drying and prevent spots. Refill when indicator light is on.
Salt: Regenerates the water softener. Refill when salt indicator light is on.
Pre-wash detergent: For heavily soiled loads, add a small amount to the pre-wash compartment.

WARNING! Do not mix different types of detergent. Keep all additives out of reach of children.

Care & Cleaning

Regular maintenance ensures long life and optimal performance.

Clean exterior: Use a soft, damp cloth. Do not use abrasive cleaners.
Clean interior: Run an empty cycle with a dishwasher cleaner monthly.
Clean filters: Remove lower basket, twist and lift out the filter assembly. Rinse under warm water.
Check spray arms: Ensure holes are not clogged. Rotate arms manually to check they spin freely.

CAUTION! Unplug appliance before cleaning. Do not remove filters during a cycle.

Safety Features

Child Lock: Press and hold Half Load and Delay Start buttons for 3 seconds to lock/unlock control panel. Overflow protection: Built-in float switch stops water intake if level is too high. Door safety: Door locks automatically during operation and unlocks at end of cycle or when paused.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of packaging material. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher does not start	Power, door, child lock	Check plug, fuse, and power supply. Ensure door is closed properly. Check if child lock is activated.
Poor washing results	Loading, filters, detergent	Ensure proper loading. Clean filters. Use correct amount of fresh detergent.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks. Clean filter system.
Salt indicator stays on	Salt container empty	Refill salt container with dishwasher salt.
Unusual noise	Spray arm, foreign object	Check if spray arms can rotate freely. Remove any foreign objects from pump or spray arms.
Leaking water	Hose connections, door seal	Check inlet and drain hose connections. Inspect door seal for damage or food residues.

Reset: Unplug appliance for 5 minutes, then plug back in to reset electronic control.

Service: For issues not resolved above, contact authorized Beko service. Have model and serial number ready.