beko dishwasher BDFN26430X manual

The Beko BDFN26430X is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 6 wash programs, half-load function, adjustable upper basket, delay timer, and child lock. It operates on 220-240V, 50Hz power. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and lower baskets, Cutlery basket, Filter system, Salt and rinse aid dispensers, Water inlet and drain hoses.

FeatureDescription
Energy RatingA++ for high energy efficiency
Capacity14 standard place settings
Wash Programs6 programs including Intensive, Eco, Quick
Half Load FunctionReduces water and energy for smaller loads
Delay TimerProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Adjustable Upper BasketHeight adjustable for taller items
DisplayLED digital display with remaining time
AquaStopLeak protection system
DryingCondensation drying system

Installation

Unpack and inspect contents. Position near water inlet, drain, and power outlet.

  1. Connect water inlet: Attach inlet hose to water tap (max pressure 1 MPa).
  2. Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
  3. Level the appliance: Adjust feet to ensure dishwasher is level.
  4. Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water and electrical connections are secure before first use. Follow local plumbing regulations.

First-Time Setup

Before first wash, prepare the dishwasher.

  1. Remove transport materials: Take out all packaging from interior.
  2. Fill salt dispenser: Add dishwasher salt to softener unit (first use only).
  3. Fill rinse aid: Add rinse aid to designated dispenser.
  4. Run initial cycle: Select Intensive program and run empty to clean interior.

CAUTION! Only use dishwasher salt and rinse aid specified for dishwashers. Do not use table salt.

Specifications

Controls and Settings

Access programs and settings via control panel buttons and digital display.

Control Panel: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Program Selection: Intensive (70°C), Eco (50°C), Quick 30' (45°C), Glass (40°C), Auto (45-65°C), Rinse (cold). Settings: Delay timer (1-24 hours), Half load (for lower basket only), Child lock (press and hold for 3 seconds), Salt refill indicator, Rinse aid level indicator.

Loading the Dishwasher

Proper loading ensures optimal cleaning results.

  1. Scrape off large food residues before loading.
  2. Lower basket: For plates, pots, pans. Adjust upper basket height if needed.
  3. Upper basket: For glasses, cups, small plates, bowls.
  4. Cutlery basket: Place knives, forks, spoons with handles down.
  5. Ensure spray arms can rotate freely; do not block with large items.

Tip: Refer to loading diagrams in manual for optimal placement.

Using Wash Programs

Select program based on soil level and dish type.

  1. Intensive: For heavily soiled pots and pans (70°C, approx. 195 min).
  2. Eco: Daily wash with energy saving (50°C, approx. 180 min).
  3. Quick 30': Lightly soiled, quick wash (45°C, 30 min).
  4. Glass: Delicate glassware and china (40°C, approx. 90 min).
  5. Auto: Automatically adjusts time/temp based on soil sensors.
  6. Rinse: Rinse only, no detergent (cold water, 15 min).

WARNING! Use only dishwasher detergent. Do not use regular washing powder or liquid.

Care & Maintenance

Regular maintenance ensures long appliance life.

  1. Clean filter: Remove and rinse under water weekly.
  2. Check spray arms: Ensure holes are not clogged.
  3. Refill salt: When salt indicator light comes on.
  4. Refill rinse aid: When rinse aid indicator shows low.
  5. Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug appliance before any maintenance. Do not remove filter during operation.

Safety Information

Read all safety instructions before installation and use.

Regulatory Information

This appliance complies with EU Directive 2014/35/EU (Low Voltage Directive) and 2014/30/EU (EMC Directive). Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of old appliance. For support, visit www.beko.com or contact local Beko service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorCheck power connection; ensure door is closed properly.
Poor washing resultsDetergent/filter/loadingUse correct detergent; clean filter; check loading.
Water not drainingDrain hose/filterCheck drain hose for kinks; clean filter.
Error code on displayVarious faultsConsult manual error code list; reset by turning power off/on.
Leaking waterHose connections/door sealCheck inlet/drain hoses; inspect door seal for damage.

Reset: Turn power off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.

beko dishwasher BDFN26430X manual © - All Rights Reserved 2025