Beko Dishwasher BDFN26430XC Manual

The Beko BDFN26430XC is a 24-inch built-in dishwasher featuring 14 place settings, 7 wash programs, AquaIntense technology, Half Load option, adjustable upper rack, Delay Start, Child Lock, and energy-efficient operation. It includes a stainless steel interior, electronic controls, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Stainless steel tub, Upper and lower racks, Cutlery basket, Filter system, Salt and rinse aid dispensers, AquaIntense spray arm.

Installation

Unpack and inspect contents. Ensure proper electrical and plumbing connections.

1. Position dishwasher: Place in prepared cabinet opening or freestanding location.
2. Connect water supply: Attach inlet hose to hot water supply (min 140°F/60°C).
3. Connect drain hose: Ensure proper drainage with anti-siphon loop.
4. Electrical connection: Connect to grounded 120V, 60Hz outlet (dedicated circuit recommended).
5. Level the unit: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before use.

First-Time Setup

Before first use, prepare dishwasher and select initial settings.

1. Remove shipping materials: Take out all interior packaging and transit bolts.
2. Fill salt dispenser: Add special dishwasher salt to softener unit (first use only).
3. Fill rinse aid: Add rinse aid to designated dispenser.
4. Run initial cycle: Select Intensive program and run empty to clean interior.
5. Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt or other substitutes.

Specifications

• Model: BDFN26430XC
• Type: Built-in dishwasher
• Dimensions (HxWxD): 33.9" x 23.6" x 22.8" (86.1 x 60 x 58 cm)
• Capacity: 14 place settings
• Programs: 7 wash programs
• Water Consumption: 2.9 gallons per cycle (Eco program)
• Energy Consumption: 0.78 kWh per cycle (Eco program)
• Noise Level: 49 dB(A)
• Power Supply: 120V, 60Hz, 10A
• Water Pressure: 14.5-116 psi (0.1-0.8 MPa)
• Inlet Water Temperature: 140-149°F (60-65°C)

Controls and Settings

Electronic control panel with LED display and touch buttons.

Control Panel Features: Power On/Off, Program Selection, Delay Start, Half Load, Child Lock, Start/Pause, Salt and Rinse Aid indicators.

Program Selection: Intensive (heavily soiled), Auto (sensors adjust), Eco (energy saving), Quick (58 min), Glass (gentle), Delicate (china/crystal), Rinse (no detergent).

Additional Functions: Delay Start (1-24 hours), Half Load (lower rack only), Child Lock (press 3 sec to activate/deactivate).

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

1. Scrape off large food particles (no pre-rinsing needed).
2. Load lower rack: Pots, pans, plates, bowls. Ensure items don't block spray arms.
3. Load upper rack: Glasses, cups, saucers, small bowls. Use adjustable rack for tall items.
4. Cutlery basket: Place knives pointing down, spoons and forks mixed for separation.
5. Add detergent: Use only dishwasher detergent in main dispenser.
6. Close door securely: Ensure latch engages completely.

Tip: Do not overload. Water must reach all surfaces for effective cleaning.

Using Wash Programs

Select program based on soil level and dish type.

1. Turn on dishwasher: Press Power button.
2. Select program: Press Program button to cycle through options.
3. Add options: Select Half Load if needed, set Delay Start if desired.
4. Start cycle: Press Start/Pause. Door locks automatically.
5. Cycle completion: Audible signal indicates end. Wait a few minutes before opening.
6. Unloading: Remove lower rack first to prevent dripping on upper items.

Program Guide: Intensive (2:30 hr, 65°C), Auto (2:00 hr, 45-65°C), Eco (3:15 hr, 50°C), Quick (0:58 hr, 55°C), Glass (1:45 hr, 40°C), Delicate (1:30 hr, 40°C), Rinse (0:15 hr, cold).

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Clean filter: Remove and rinse filter assembly weekly under running water.
2. Check spray arms: Ensure holes are not clogged. Remove and clean if necessary.
3. Refill salt: When salt indicator lights, add special dishwasher salt to softener.
4. Refill rinse aid: When rinse aid indicator lights, fill dispenser.
5. Clean interior: Monthly, run empty cycle with dishwasher cleaner or vinegar.
6. Clean door seal: Wipe with damp cloth to remove debris.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners or tools.

Safety Information

Important safety precautions for proper use.

• Connect to grounded outlet only.
• Use only dishwasher detergent, salt, and rinse aid.
• Load sharp knives pointing downward.
• Do not open door during hot cycles - risk of steam burns.
• Keep children away from open dishwasher and detergent.
• Disconnect power before servicing.
• Do not wash items soiled with flammable substances.

WARNING! Detergents are corrosive. Keep out of reach of children. In case of ingestion, seek medical attention immediately.

Regulatory Information

This appliance complies with relevant safety standards. Energy label: A++ rating. Manufactured by Beko. For support, visit www.beko.com or contact customer service at 1-877-461-2635. Serial number located on door edge. Keep for reference.

Troubleshooting

Reset: Turn off at power source for 5 minutes, then restart.

Service: 1-877-461-2635; www.beko.com