beko dishwasher BDFN26440W manual

The Beko BDFN26440W is a 24-inch built-in dishwasher with 14 place settings, featuring 6 wash programs, a delay start timer, half-load option, child lock, and energy-efficient drying. It includes a stainless steel interior, adjustable upper basket, cutlery basket, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, detergent dispenser, salt and rinse aid compartments.

Installation

Unpack and inspect contents. Ensure proper electrical and water connections.

1. Position dishwasher: Place in prepared cabinet space or freestanding location.
2. Connect water supply: Attach inlet hose to cold water tap using supplied connector.
3. Connect drain hose: Ensure proper drainage into sink or waste pipe.
4. Electrical connection: Plug into grounded 220-240V AC outlet.
5. Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by a qualified technician. Ensure water and electrical connections are secure to prevent leaks or hazards.

First-Time Setup

Before first use, prepare the dishwasher and set basic functions.

1. Remove shipping materials: Take out all packaging inside and outside the dishwasher.
2. Fill salt dispenser: Add water softener salt to the dedicated compartment.
3. Fill rinse aid: Pour rinse aid into the dispenser until full.
4. Run initial cycle: Select a high-temperature program without dishes to clean interior.
5. Set water hardness: Adjust setting according to local water hardness using the control panel.

CAUTION! Use only dishwasher-specific salt and rinse aid. Do not use table salt or other substitutes.

Specifications

• Model: BDFN26440W
• Type: Built-in dishwasher
• Place Settings: 14
• Programs: 6 wash programs
• Energy Consumption: 0.93 kWh per cycle (Eco program)
• Water Consumption: 9.5 liters per cycle (Eco program)
• Noise Level: 49 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Power Supply: 220-240V, 50Hz
• Weight: 42 kg

Controls and Settings

Control Panel: POWER button, program selection buttons, delay start, half load, child lock, and digital display.

Programs: Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Auto (sensor-based), Rinse (cold).

Settings: Delay start (1-24h), half load (for lower basket only), child lock (press and hold for 3 seconds), water hardness adjustment (1-5 levels). Indicators: Salt, rinse aid, end of cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

1. Scrape off large food residues before loading.
2. Place plates, pots, and large items in lower basket.
3. Place glasses, cups, and small items in upper basket.
4. Use cutlery basket for utensils; mix types for better cleaning.
5. Ensure items do not block spray arms or detergent dispenser.
6. Adjust upper basket height if needed for taller items.

Tip: Do not overload baskets. Leave space between items for water circulation.

Using Wash Programs

Select program based on soil level and dish type.

1. Turn on: Press POWER button.
2. Select program: Press corresponding program button (Intensive, Eco, etc.).
3. Add options: Press DELAY START or HALF LOAD if desired.
4. Add detergent: Place detergent in dispenser; close lid.
5. Start: Press START/PAUSE button to begin cycle.
6. Monitor: Digital display shows remaining time; indicators show salt/rinse aid status.
7. End of cycle: Audible signal sounds; door unlocks automatically after cooling.

WARNING! Use only dishwasher detergent. Do not use hand soap or other cleaning agents.

Maintenance & Cleaning

Regular maintenance ensures longevity and performance.

1. Clean filter: Remove and rinse filter assembly weekly under running water.
2. Clean spray arms: Check for blockages; rinse if necessary.
3. Refill salt: Add when salt indicator lights; use funnel to avoid spillage.
4. Refill rinse aid: Add when rinse aid indicator lights; adjust dispenser setting if needed.
5. Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug dishwasher before cleaning. Do not use steam cleaners or high-pressure water jets.

Safety Features

Child Lock: Prevents accidental program changes. Door Safety Lock: Door locks during operation and unlocks after cooling. Overflow Protection: Automatically stops water if overflow detected.

Regulatory Information

CE certified; complies with EU directives for safety and electromagnetic compatibility. Energy label: A++ for energy efficiency, B for drying. Copyright © Beko plc. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Reset: Turn off power for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com