beko dishwasher BDFN26443G manual

The Beko BDFN26443G is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 5 wash programs, half-load option, adjustable upper basket, digital display, delay timer, and child lock. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser.

FeatureDescription
Capacity14 place settings
Energy RatingA++
Wash Programs5 programs including Intensive, Eco, Quick
Half Load OptionReduces water and energy for smaller loads
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
Digital DisplayShows program status and remaining time
Adjustable Upper BasketHeight adjustable for larger items
Salt ContainerFor water softening
Rinse Aid DispenserFor improved drying results

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
  2. Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
  3. Level the appliance: Adjust feet to ensure dishwasher is stable.
  4. Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Remove transport materials: Check interior for any packing tape or blocks.
  2. Fill salt container: Add dishwasher salt to the softener unit (first use only).
  3. Fill rinse aid: Pour rinse aid into dispenser until MAX indicator.
  4. Run initial wash: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Access controls via digital panel. Buttons: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK.

Display Indicators: Program duration, delay time, salt/rinse aid warnings, end of cycle.

Program Selection: Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Soak (pre-wash). Settings: Delay timer (1-24h), half load option (for upper basket only), child lock (press and hold for 3 seconds).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues before loading.
  2. Place plates in lower basket facing center.
  3. Adjust upper basket height for taller items.
  4. Place glasses and cups upside down in upper basket.
  5. Put cutlery in basket with handles down (except sharp knives).
  6. Ensure spray arms can rotate freely.

Tip: Do not overload. Place delicate items in upper basket only.

Wash Programs

Select program based on soil level and dish type.

  1. Intensive (70°C): For heavily soiled pots and pans.
  2. Eco (50°C): Daily wash with best energy efficiency.
  3. Quick (45°C): For lightly soiled loads, 30 minutes.
  4. Glass (40°C): For delicate glassware and china.
  5. Soak: Pre-wash for dishes with dried-on food.

WARNING! Plastic items on lower rack may warp in Intensive program.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Clean filter weekly: Remove and rinse under running water.
  2. Check spray arms monthly: Ensure holes are not clogged.
  3. Refill salt: When salt indicator light illuminates.
  4. Refill rinse aid: When rinse aid indicator light illuminates.
  5. Clean door seal: Wipe with damp cloth to remove debris.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open door (risk of hot water). Do not open door during wash cycle. Use only dishwasher detergent. Ensure power cord is not damaged.

WARNING! Do not wash items soiled with flammable substances. Do not lean on open door.

Regulatory Information

CE marked. Complies with EU directives for low voltage and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/child lockCheck power connection; ensure child lock is off; close door properly.
Poor cleaning resultsLoading/filter/detergentCheck loading; clean filter; use correct amount of fresh detergent.
Water not drainingDrain hose cloggedCheck drain hose for kinks; clean filter; ensure proper installation height.
Salt indicator light onSalt container emptyRefill with dishwasher salt; run short program to flush system.
Unusual noiseSpray arm obstructionCheck for items blocking spray arm rotation; ensure proper loading.

Reset: Turn off power for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model number ready.

beko dishwasher BDFN26443G manual © - All Rights Reserved 2025