beko dishwasher BDFN26450A manual

The Beko BDFN26450A is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 50 dB noise level, and multiple wash programs. It includes a half-load function, delay timer, child lock, and salt/low rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and Lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Inlet and Drain hoses.

Feature	Description
Energy Rating	A++ for high energy efficiency
Capacity	14 standard place settings
Noise Level	50 dB (quiet operation)
Wash Programs	Auto, Intensive, Eco, Quick, Glass, 90 Min
Half Load Function	Reduces water and energy for smaller loads
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	LED alerts for refills
Display	Digital with remaining time indicator
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water inlet: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place into sink or dedicated drain pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure stability.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Installation must comply with local regulations. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of special dishwasher salt.
Fill rinse aid dispenser: Open lid on door, fill to MAX line with rinse aid.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match local water hardness (1-5).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: BDFN26450A
Type: Freestanding Dishwasher
Energy Class: A++
Water Consumption: 10 L per cycle (Eco program)
Power Consumption: 0.93 kWh per cycle (Eco program)
Voltage/Frequency: 220-240V ~ 50Hz
Max Inlet Pressure: 1 MPa (10 bar)
Min Inlet Pressure: 0.03 MPa (0.3 bar)
Programs: 6 main programs + 4 options
Warranty: 2 years standard

Controls and Settings

Control Panel: ON/OFF button, Program selector, Delay Timer, Half Load, Start/Pause, Child Lock.

Programs: Auto (senses soil), Intensive (70°C), Eco (50°C), Quick (30 min), Glass (40°C), 90 Min (everyday).

Options: Delay (1-24h), Half Load (for lower basket only), Extra Dry (additional heating). Settings: Water hardness (1-5), Rinse aid dosage (1-4), Acoustic signal on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing required).
Upper basket: Glasses, cups, saucers, small plates.
Lower basket: Plates, pots, pans, bowls.
Cutlery basket: Forks, knives, spoons (handles down).
Ensure items do not block spray arms and are securely placed.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Wash Programs

Select program based on load type and soil level.

Turn on: Press ON/OFF.
Select program: Turn selector to desired program.
Add options: Press Delay or Half Load if needed.
Start: Press Start/Pause; door locks automatically.
During cycle: Remaining time shows on display.
After cycle: Acoustic signal sounds; wait 2 minutes before opening (steam risk).
Unload: Start with lower basket to avoid dripping.

WARNING! Do not open door during wash cycle. Hot steam can cause burns.

Maintenance & Care

Regular maintenance ensures longevity.

Clean filter: Remove lower basket, twist out filter assembly, rinse under tap weekly.
Check spray arms: Ensure holes are not clogged; rotate freely.
Refill salt: When indicator lights, add salt (only to designated container).
Refill rinse aid: When indicator lights, fill to MAX line.
Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not remove filter during operation.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open door (risk of climbing).
Use only detergent for dishwashers.
Do not operate if hose is damaged.

WARNING! Risk of electric shock. Do not immerse appliance in water.

Regulatory Information

CE marked. Complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste disposal: Follow local regulations for WEEE. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug; ensure door is closed properly; press ON/OFF.
Poor cleaning results	Loading/detergent	Rearrange load; check spray arms; use correct detergent amount.
Water not draining	Filter/drain hose	Clean filter; check drain hose for kinks; ensure sink drain is clear.
Salt indicator on	Salt empty	Refill salt container; run short program to flush system.
Unusual noise	Spray arm/items	Check for items touching spray arm; ensure baskets are properly inserted.
Error code E1	Water inlet issue	Check water tap is on; inspect inlet hose for kinks; clean inlet filter.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service. Keep model number ready.