beko dishwasher BDFN26450CW manual

The Beko BDFN26450CW is a 24-inch built-in dishwasher featuring 14 place settings, 7 wash programs, delay start, half load option, child lock, and energy-efficient operation. It includes a stainless steel interior, adjustable upper rack, cutlery basket, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, stainless steel tub, adjustable upper rack, cutlery basket, detergent dispenser, rinse aid and salt compartments, filter system, and inlet/drain hoses.

Feature	Description
Place Settings	14 standard place settings capacity
Wash Programs	7 programs including Intensive, Eco, Quick, Glass, etc.
Delay Start	Program start delay from 1 to 24 hours
Half Load	Option for washing fewer dishes to save water/energy
Child Lock	Safety lock to prevent program changes during operation
Display	Digital display showing remaining time and program status
Adjustable Rack	Upper rack adjustable in height
Filter System	3-stage filtration (microfilter, coarse filter, fine filter)
Salt Indicator	Light indicates when water softener salt is low
Rinse Aid Indicator	Light indicates when rinse aid needs refilling

Installation

Unpack and inspect contents. Ensure proper electrical and plumbing connections.

Position dishwasher: Place in cabinet cutout (24-inch width). Level using adjustable feet.
Connect water supply: Attach inlet hose to hot water line (max temperature 140°F/60°C).
Connect drain hose: Route to sink drain or garbage disposal with proper loop to prevent backflow.
Electrical connection: Plug into grounded 120V, 60Hz outlet (dedicated circuit recommended).
Secure to counter: Use mounting brackets to secure dishwasher to underside of countertop.

WARNING! Installation must comply with local plumbing and electrical codes. If unsure, hire a qualified technician.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

Remove shipping materials: Take out all interior packaging and transit bolts.
Fill salt dispenser: Add water softener salt to compartment (use only dishwasher salt).
Fill rinse aid dispenser: Pour rinse aid into designated compartment until full.
Run initial cycle: Select Intensive program without dishes to clean interior and remove residues.
Set water hardness: Adjust setting according to local water hardness using program buttons.

CAUTION! Only use dishwasher-specific detergents, salt, and rinse aid. Do not use regular table salt.

Specifications

Model: BDFN26450CW
Type: Built-in dishwasher
Dimensions (HxWxD): 33.9" x 23.6" x 23.6" (installation dimensions may vary)
Capacity: 14 place settings
Programs: 7 wash programs
Water Consumption: Approx. 2.9 gallons per cycle (Eco program)
Energy Consumption: Meets ENERGY STAR® requirements
Voltage: 120V AC, 60Hz
Power: 1200W (heating element)
Noise Level: 49 dB (quiet operation)

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Programs: Intensive (heavily soiled), Eco (energy saving, normally soiled), Quick (lightly soiled, 30 min), Glass (delicate glassware), Auto (sensor-based), Rinse (rinse only), Soak (pre-wash).

Settings: Delay Start (1-24 hours), Half Load (reduces water usage), Child Lock (press and hold for 3 seconds), Rinse Aid/Salt indicators (lights show low levels).

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food particles (no pre-rinsing needed).
Lower rack: Place plates, pots, pans facing center. Use adjustable tines for different sizes.
Upper rack: Load glasses, cups, bowls. Rack can be raised/lowered for tall items.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Detergent: Add powder, gel, or tablet to dispenser. Use correct amount for load size.

Tip: Do not overload. Ensure spray arms can rotate freely and water reaches all items.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER button.
Select program: Press desired program button (light indicates selection).
Add options: Press Delay Start or Half Load if needed.
Start: Close door firmly and press Start/Pause. Display shows remaining time.
Pause/change: Press Start/Pause to stop; door locks during wash for safety.
End of cycle: Signal sounds; display shows "End." Dishes remain warm for drying.

WARNING! Do not open door during hot wash phases; steam may cause burns.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Clean filters: Remove and rinse under water weekly to prevent clogging.
Clean spray arms: Check for blockages in holes; remove debris.
Wipe door seals: Clean rubber gasket to maintain seal.
Descale: Run empty cycle with dishwasher cleaner monthly if in hard water area.
Check salt/rinse aid: Refill when indicators light up.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners on interior.

Safety Features

Child Lock: Prevents program changes during operation. Door Lock: Automatically locks during wash cycles. Overflow Protection: Float switch stops water if detected. Thermal Cut-off: Prevents overheating. Leak Protection: Base pan contains small leaks.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. ENERGY STAR® certified. Manufactured by Beko. Copyright © 2023 Beko. All trademarks property of their respective owners. For support, visit www.bekousa.com or contact 1-877-793-8962.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Door not closed, power issue	Ensure door fully closed; check power outlet; reset circuit breaker.
Poor cleaning results	Overloaded, wrong program, clogged filter	Load properly; select appropriate program; clean filters.
Water not draining	Drain hose clogged/kinked	Check hose for kinks; clean filter; ensure proper drain connection.
Detergent not dissolving	Dispenser clogged, wet tablets	Clean dispenser; ensure detergent compartment dry before adding tablet.
Noise during operation	Spray arm hitting dishes, debris	Rearrange load; remove debris from spray arms.
Leaking water	Door seal damaged, hose loose	Check door seal; tighten hose connections; ensure level installation.

Reset: Unplug for 5 minutes, then restart.

Service: 1-877-793-8962; www.bekousa.com