beko dishwasher BDFN26530B manual

The Beko BDFN26530B is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 12 wash programs including Eco, Intensive, and Quick Wash, digital display, delay start function, child lock, half-load option, and AquaIntense technology for improved cleaning. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filters, and spray arms.

FeatureDescription
Capacity14 place settings
Energy RatingA++
Wash Programs12 programs including Eco, Intensive, Quick, Auto
Digital DisplayShows program, time remaining, and status
Delay StartProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Half LoadOption for washing fewer dishes
AquaIntenseEnhanced spray system for better cleaning
Water SoftenerBuilt-in salt container for hard water areas
Rinse Aid DispenserAdjustable for improved drying

Installation

Unpack and inspect contents. Position near water inlet, drain, and power outlet.

  1. Connect water inlet: Attach supplied hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place in sink or connect to waste pipe (height 40-100 cm).
  3. Level the appliance: Adjust feet to ensure dishwasher is stable and level.
  4. Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water and electrical connections are secure to prevent leaks or electric shock. Do not use extension cords.

First-Time Setup

Before first use, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, unscrew salt cap, fill with water first time, then fill with dishwasher salt.
  2. Fill rinse aid dispenser: Open dispenser lid, fill to MAX line, close lid.
  3. Run empty wash: Select Intensive program without dishes to clean interior.
  4. Set water hardness: Use program button combination to set level (see manual).

CAUTION! Use only dishwasher salt, rinse aid, and detergents. Do not use regular table salt.

Specifications

Controls and Settings

Control Panel: ON/OFF button, Program Selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Programs: Eco (default), Intensive (70°C), Auto (45-65°C), Quick 30' (30 min), Glass (40°C), Hygiene (70°C).

Settings: Delay Start (1-24 hrs), Child Lock (press 3 sec), Half Load (for fewer dishes), Rinse Aid adjustment (1-6). Display shows program, time remaining, and error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: Plates, pots, pans. Adjust basket height if needed.
  3. Upper basket: Glasses, cups, small plates. Use fold-down cup shelves.
  4. Cutlery basket: Place knives, forks, spoons; ensure they do not nest.
  5. Add detergent: Use powder, tablets, or gel in dispenser. Close lid.

Tip: Do not overload; ensure spray arms can rotate freely. Place delicate items in upper basket.

Using Wash Programs

Select program based on load and soil level.

  1. Turn on: Press ON/OFF.
  2. Select program: Press program button (Eco, Intensive, etc.).
  3. Optional settings: Set Delay Start, Half Load if needed.
  4. Start: Press Start/Pause. Door locks automatically.
  5. During wash: Display shows time remaining. Program ends with beep.
  6. After wash: Wait a few minutes before opening; dishes are hot.
  7. Unload: Remove lower basket first to avoid dripping.

WARNING! Do not open door during wash; hot steam may escape. Use door as a handle only when cool.

Care & Maintenance

Regular maintenance ensures performance and longevity.

  1. Clean filters: Remove lower basket, twist and lift out filters; rinse under water weekly.
  2. Clean spray arms: Check for blockages; remove and rinse monthly.
  3. Check salt level: Refill when indicator light comes on (approx. every 2 months).
  4. Check rinse aid: Refill when indicator light comes on.
  5. Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects to clean spray arms.

Safety Information

Read all instructions before use. Keep children away from open door and detergent. Use only dishwasher-safe items. Do not wash items soiled with flammable substances. Ensure door is closed properly before starting.

WARNING! Risk of electric shock. Do not operate if damaged or if power cord is frayed. Contact authorized service.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste disposal: Dispose of packaging and old appliance according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher does not startPower, door, child lockCheck plug, fuse; ensure door closed; deactivate child lock.
Poor cleaning resultsLoading, filters, detergentReload properly; clean filters; use correct detergent amount.
Water not drainingDrain hose, filter blockageCheck hose for kinks; clean filter; ensure drain height correct.
Noise during operationSpray arm, foreign objectsCheck for items blocking spray arm; remove foreign objects.
Error code on displayVarious faultsRefer to manual error code list; reset by turning off/on.

Reset: Turn off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com

beko dishwasher BDFN26530B manual © - All Rights Reserved 2025