Beko Dishwasher BDFN36550XWP Manual

The Beko BDFN36550XWP is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 50 dB noise level, and multiple wash programs including Eco, Intensive, and Quick Wash. It includes a half-load option, delay timer, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet and drain hoses.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (Energy Efficient)
Noise Level	50 dB (Quiet Operation)
Wash Programs	Eco, Intensive, Quick, Glass, Auto
Half Load Option	Reduces water and energy for smaller loads
Delay Timer	1-24 hours delay start
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	LED alerts for refills
Display	Digital with remaining time indicator
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place into sink or dedicated drain pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure stability.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not bend or kink hoses. Ensure electrical socket is easily accessible.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open compartment on door, fill to MAX line with rinse aid.
Run empty wash: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match local water hardness (1-5).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: BDFN36550XWP
Type: Freestanding Dishwasher
Capacity: 14 place settings
Energy Class: A++
Annual Energy Consumption: 237 kWh
Water Consumption (Eco): 9.5 liters per cycle
Noise Level: 50 dB
Programs: Eco, Intensive (70°C), Quick (58 min), Glass, Auto, Half Load
Power Supply: 220-240V ~ 50Hz
Max Power: 2000 W
Inlet Water Pressure: 0.03 - 1 MPa

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Program Guide:

Eco: Energy-saving for normally soiled dishes (3h 15min).
Intensive: For heavily soiled pots/pans (70°C, 2h 30min).
Quick: Lightly soiled, quick wash (58 min, 55°C).
Glass: Delicate glassware (40°C, 1h 20min).
Auto: Sensors adjust time/temp based on soil level.

Settings: Delay timer (1-24h), Child Lock (press 3 sec), Half Load (select before starting).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Upper basket: Cups, glasses, small plates, plastic items.
Lower basket: Plates, pots, pans, larger items.
Cutlery basket: Knives, forks, spoons (handles down for safety).
Tips: Do not overload; ensure spray arms can rotate freely; place soiled surfaces facing inward.

Tip: Scrape off large food residues before loading. Pre-rinsing is not necessary.

Using Wash Programs

Select program based on load type and soil level.

Turn on: Press ON/OFF.
Load dishes and add detergent to dispenser.
Select program: Press corresponding button (Eco, Intensive, etc.).
Optional: Set Delay or Half Load.
Start: Close door firmly; press Start/Pause. Display shows remaining time.
After cycle: Wait for door lock to release (approx. 2 min after end). Unload from bottom first.

WARNING! Use only dishwasher detergent. Do not open door during hot wash cycles.

Maintenance & Care

Regular maintenance ensures longevity.

Filter cleaning: Twist and remove filter assembly weekly; rinse under tap.
Spray arms: Check monthly for blockages; clean holes with toothpick.
Door seals: Wipe with damp cloth to remove residue.
Exterior: Clean with mild soap and soft cloth.
Descaling: Run empty with vinegar or dishwasher cleaner every 2 months if in hard water area.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Read all instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open door (hot surfaces).
Do not sit or stand on open door.
Disconnect power before servicing.
Only qualified technician should repair.

Emergency: In case of leak, turn off water supply and disconnect power.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check plug; ensure door closed properly; disable child lock.
Poor cleaning results	Loading, detergent, filter	Reload dishes properly; use fresh detergent; clean filter.
Water not draining	Drain hose blockage	Check hose for kinks; clean filter; ensure drain height min 40 cm.
Salt/Rinse Aid light on	Low level	Refill salt container or rinse aid dispenser.
Unusual noise	Spray arm obstruction	Check for utensils blocking spray arms; reposition.
Error code E1	Water inlet problem	Check water tap is on; inspect inlet hose for kinks.
Error code E3	Heating issue	Reset by turning off/on; if persists, call service.

Reset: Turn off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service: 0333 207 9710 (UK) or local dealer.