beko dishwasher BDFN36640CX manual

The Beko BDFN36640CX is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, 48 dB noise level, and multiple wash programs. It features a stainless steel interior, digital display, delay start, half load option, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Care & Cleaning 9. Error Codes 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, filter system, detergent dispenser, salt container, rinse aid dispenser, digital display, and control panel.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Noise Level	48 dB
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Delicate
Delay Start	1-24 hours
Half Load	Option for fewer dishes
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid is low
Digital Display	Shows program time and status

Installation

Unpack and inspect contents. Ensure location is level, near water supply, drain, and power outlet.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Level the dishwasher: Adjust feet to ensure stability.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or shock. Do not use extension cords.

First-Time Setup

Before first use, run a wash cycle without dishes to remove manufacturing residues.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt, fill with water.
Fill rinse aid dispenser: Open lid, fill to MAX line, close securely.
Select program: Choose Intensive cycle at highest temperature.
Add detergent: Place powder or tablet in dispenser.
Start cycle: Close door and press Start/Pause.

CAUTION! Use only dishwasher salt and rinse aid. Do not mix with detergents.

Specifications

Model: BDFN36640CX
Type: Freestanding
Capacity: 14 place settings
Energy Consumption: 0.95 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Noise Level: 48 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Power: 2000 W
Inlet Water Pressure: 0.03-1 MPa

Controls and Settings

Control Panel: Power On/Off, Program Selection (Auto, Intensive, Eco, Quick, Glass, Delicate), Delay Start, Half Load, Child Lock, Start/Pause.

Display: Shows selected program, remaining time, delay start hours, and error codes.

Programs: Auto (senses soil level), Intensive (for heavily soiled), Eco (energy saving), Quick (58 min), Glass (for fragile), Delicate (low temperature). Settings: Delay Start (1-24 hrs), Half Load (reduces water use), Child Lock (hold 3 sec to activate/deactivate).

Loading the Dishwasher

Upper basket: For glasses, cups, saucers, small plates. Lower basket: For plates, bowls, pots, pans. Cutlery basket: For knives, forks, spoons (handles down).

Scrape off large food residues.
Load dishes facing inward, not touching.
Place delicate items in upper basket.
Ensure spray arms rotate freely.

Tip: Do not overload; water must reach all surfaces.

Using Detergents & Additives

Use only dishwasher detergents (powder, tablets, gel).

Detergent: Fill main dispenser (check program for amount).
Pre-wash: For heavily soiled loads, add small amount to door compartment.
Rinse aid: Adjust dispenser setting (1-6) based on water hardness.
Salt: Refill when indicator light comes on (use only dishwasher salt).

WARNING! Do not use hand soap, laundry detergent, or abrasive cleaners.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Monthly: Clean filter, spray arms, door seal.

Filter: Turn counterclockwise, lift out, rinse under water.
Spray arms: Remove, check for blockages, rinse.
Door seal: Wipe with soft cloth.
Run empty cycle with dishwasher cleaner monthly.

CAUTION! Do not use sharp objects or abrasive cleaners on interior.

Error Codes

Code	Meaning	Action
E1	Water inlet problem	Check tap is on, hose not kinked.
E2	Drain problem	Check drain hose for blockages.
E3	Heating problem	Reset by turning off/on; if persists, call service.
E4	Door open	Close door securely.
E5	Water leakage	Turn off water, unplug, check hoses.

Regulatory Information

CE marked. Complies with EU directives for low voltage, electromagnetic compatibility, and eco-design. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishes not clean	Overloaded, wrong program, low detergent	Reload correctly; select Intensive program; use correct detergent amount.
No power	Plug not in, power outage, door not closed	Check plug; ensure door is latched.
Water not draining	Drain hose blocked, filter clogged	Clean filter; check hose for kinks/blockages.
Leaking	Door seal damaged, hose loose	Check seal; tighten hose connections.
Noise during operation	Spray arm hitting dishes, foreign object	Rearrange load; check for small objects in pump.

Reset: Turn off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.