Beko Dishwasher BDFN36640G Manual

The Beko BDFN36640G is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 48 dB noise level, and multiple wash programs including Eco, Intensive, and Quick Wash. It includes a half-load function, delay timer, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet/outlet hoses.

Feature	Description
Energy Rating	A++ for efficient energy consumption
Capacity	14 place settings
Noise Level	48 dB (quiet operation)
Wash Programs	Eco, Intensive, Quick, Glass, Auto
Half Load Function	Reduces water/energy for smaller loads
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Salt/Rinse Aid Indicators	LED alerts for refilling
Display	Digital display with program progress
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location near water/drain connections.

Position dishwasher: Level on stable floor near sink.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Secure to sink drain or standpipe (min height 40 cm).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Remove transit bolts: Located at rear; use spanner to loosen.

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without dishes.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg dishwasher salt.
Fill rinse aid: Open dispenser on door, fill to MAX line.
Select program: Choose Intensive cycle at highest temperature.
Start cycle: Press Start/Pause; let complete to remove manufacturing residues.
Set water hardness: Use program buttons to set according to local water hardness.

CAUTION! Only use dishwasher-specific salt and rinse aid.

Specifications

Model: BDFN36640G
Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Class: A++
Water Consumption: 10 L per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 48 dB
Programs: Eco 50°C, Intensive 70°C, Quick 45°C, Glass 40°C, Auto 45-65°C
Dimensions: 85 x 60 x 60 cm (HxWxD)
Weight: 42 kg

Controls and Settings

Control Panel: Power On/Off, Program selection buttons, Delay Timer, Half Load, Start/Pause, Child Lock.

Program Guide:

Eco: Energy-saving for normally soiled dishes (50°C, 3h 15min)
Intensive: Heavily soiled pots/pans (70°C, 2h 30min)
Quick: Lightly soiled, quick wash (45°C, 29min)
Glass: Delicate glassware (40°C, 40min)
Auto: Sensors adjust temperature/time based on soil (45-65°C)

Settings: Delay timer (1-24h), Child lock (hold Start 3 sec), Water hardness adjustment.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Lower basket: Plates, pots, pans (face center).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Knives, forks, spoons (handles down; separate silver/types).
Pre-rinse: Scrape off large food residues; no need to pre-wash.
Detergent: Use only dishwasher detergent in dispenser (powder/tablets).

Tip: Do not overload; ensure spray arms can rotate freely.

Using Wash Programs

Select program based on load type.

Load dishes and add detergent.
Press Power to turn on.
Select program using program buttons.
Optional: Set Delay Timer or Half Load.
Press Start/Pause; cycle begins (display shows remaining time).
After cycle: Wait for auto door unlock (if enabled); open slightly to dry.

WARNING! Do not open door during hot cycles; steam may cause burns.

Maintenance & Care

Regular maintenance ensures longevity.

Filter cleaning: Remove lower basket, twist out filter, rinse under water weekly.
Spray arms: Check for blockages; clean holes with soft brush.
Door seal: Wipe with damp cloth to remove debris.
Descaling: Run empty cycle with dishwasher cleaner monthly if in hard water area.
Exterior: Clean with soft, damp cloth; no abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not use sharp objects on filter.

Safety Features

Child Lock: Prevents program changes. Overflow protection: Auto shut-off if leak detected. Door safety: Dishwasher stops if door opened during cycle. Thermal protection: Prevents overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 1059/2010. Waste disposal: Follow local regulations for electrical appliances. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/child lock	Check plug/power; ensure child lock is off; close door properly.
Poor cleaning results	Loading/detergent	Check loading; use correct detergent amount; clean filter.
Water not draining	Drain hose blockage	Check hose for kinks/blockages; ensure drain height min 40 cm.
Salt indicator on	Low salt	Refill salt container; run short cycle to flush.
Unusual noise	Spray arm obstruction	Check for utensils blocking spray arms; reposition load.
Error code E1	Water inlet fault	Check water supply/tap; ensure inlet hose not kinked.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com