Beko Dishwasher BDFN36640XC Manual

The Beko BDFN36640XC is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, child lock, half load option, and AquaIntense technology for improved cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, digital display, control panel.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Wash Programs	8 programs including Intensive, Eco, Quick, Glass
AquaIntense Technology	Enhanced spray system for better cleaning
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Saves water and energy for smaller loads
Digital Display	Shows remaining time and program status
Salt & Rinse Aid Indicators	Alerts when refills are needed
Noise Level	49 dB (quiet operation)

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to water tap (max pressure 1 MPa).
Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
Level the dishwasher: Adjust feet until unit is stable and level.
Plug into grounded electrical outlet (220-240V, 50Hz).

WARNING! Do not use extension cords. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run an empty wash cycle with detergent.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt.
Fill rinse aid: Open dispenser on door, fill to MAX line with rinse aid.
Add detergent: Use main wash detergent in dispenser compartment.
Select Intensive program and start cycle to clean interior and activate systems.

CAUTION! Use only dishwasher-specific salt, rinse aid, and detergents.

Specifications

Model: BDFN36640XC
Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Consumption: 0.92 kWh per cycle (Eco program)
Water Consumption: 9.5 liters per cycle (Eco program)
Noise Level: 49 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Power: 2000 W
Programs: Intensive, Eco, Quick 30', Glass, Delicate, Auto, Hygiene, Rinse

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Icons: Program indicator, remaining time, salt/rinse aid alerts, child lock symbol.

Program Selection: Turn knob to choose program (Intensive, Eco, Quick, etc.). Delay Start: Press to set start time (1-24 hours). Half Load: Reduces water use for smaller loads. Child Lock: Press and hold for 3 seconds to activate/deactivate. Settings: Default temperature, beep sound, and reset options accessible via combination presses.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues before loading.
Lower basket: Plates, pots, pans (face inward toward spray arm).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Ensure items do not block spray arms or detergent dispenser.

Tip: Do not overload; leave space between items for water circulation.

Using Wash Programs

Select program based on soil level and dish type.

Intensive: Heavily soiled pots/pans (70°C).
Eco: Normally soiled dishes, energy efficient (50°C).
Quick 30': Lightly soiled, quick wash (45°C).
Glass: Delicate glassware (40°C).
Delicate: China, plastic items (40°C).
Auto: Adjusts temperature/time based on soil sensors.
Hygiene: Sanitizes baby bottles (70°C).
Rinse: Rinse only, no detergent.

WARNING! Do not open door during wash cycle; hot steam may escape.

Care & Maintenance

Regular maintenance ensures longevity and performance.

Clean filters: Remove lower basket, twist out filter assembly, rinse under water weekly.
Clean spray arms: Check for blockages, rinse holes.
Wipe door seals: Use damp cloth to remove debris.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months.
Check salt/rinse aid: Refill when indicators light up.

CAUTION! Unplug before cleaning interior parts. Do not use abrasive cleaners.

Safety Information

Read all instructions before use. Keep children away from open door. Do not wash items soiled with flammable substances. Only connect to grounded outlet. Disconnect power before servicing. Use only recommended detergents.

Regulatory Information

CE compliant. Energy label A++. Meets EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power, door, child lock	Check power supply; ensure door closed properly; deactivate child lock.
Poor cleaning results	Loading, detergent, filters	Reload dishes properly; use fresh detergent; clean filters.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks; clean filter assembly.
Leaking water	Door seal, hose connections	Check door seal for debris; tighten hose connections.
Unusual noise	Spray arm, foreign objects	Check for items blocking spray arm; remove foreign objects.
Salt/Rinse Aid light on	Low levels	Refill salt and/or rinse aid containers.
Error codes (E1, E2, etc.)	Various faults	Consult manual error code list; reset by turning power off/on.

Reset: Turn off power for 5 minutes, then restart.

Service: Contact authorized Beko service: www.beko.com