Beko Dishwasher BDFN36650XC Manual

The Beko BDFN36650XC is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 50 dB noise level, and multiple wash programs including Eco, Intensive, and Quick Wash. It includes a half-load option, delay timer, child lock, and salt and rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, and filters.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (Energy Efficient)
Noise Level	50 dB (Quiet Operation)
Wash Programs	Eco, Intensive, Quick, Glass, Auto
Half Load Option	Reduces water and energy for smaller loads
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	LED alerts for refills
Digital Display	Shows program time and status
Adjustable Upper Basket	Height adjustable for taller items

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
Level the appliance: Adjust feet to ensure stability.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or electric shock. Do not kink hoses.

First-Time Setup

Before first use, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew salt cap, add 1 kg of dishwasher salt, then refill with water until it overflows.
Fill rinse aid dispenser: Open lid, pour rinse aid up to MAX line, close lid.
Run empty wash: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness (see manual table).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Model: BDFN36650XC
Type: Freestanding Dishwasher
Capacity: 14 Place Settings
Energy Rating: A++
Annual Energy Consumption: 280 kWh
Water Consumption (Eco): 10 Liters per cycle
Noise Level: 50 dB
Programs: Eco 50°C, Intensive 70°C, Quick 45°C, Glass 40°C, Auto 45-65°C
Power Supply: 220-240V ~ 50Hz
Dimensions (HxWxD): 85 x 60 x 60 cm

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Timer, Half Load, Start/Pause, Child Lock.

Programs: Eco (energy-saving for normally soiled dishes), Intensive (for heavily soiled pots), Quick (1-hour wash for lightly soiled), Glass (gentle for crystal), Auto (sensors adjust wash).

Settings: Use ON/OFF to power. Select program with corresponding button. Press Delay to set start time (1-24 hrs). Press Half Load for smaller loads. Press Start/Pause to begin or interrupt cycle. Hold Child Lock for 3 sec to activate/deactivate.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Plates, pots, pans. Place facing center, tilted downward.
Upper basket: Glasses, cups, small bowls. Secure stemware between prongs.
Cutlery basket: Place knives blade down, spoons/forks mixed for separation.
Detergent: Use tablet or powder in dispenser. Close lid firmly.

Tip: Do not overload. Ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

Close door firmly.
Press ON/OFF.
Select program (Eco, Intensive, etc.).
Optional: Set Delay or Half Load.
Press Start. Display shows remaining time.
After cycle ends, wait a few minutes before opening (steam hot).
Turn off with ON/OFF.

WARNING! Do not open door during wash. Hot steam can cause burns.

Maintenance & Cleaning

Regular maintenance ensures longevity.

Clean filters weekly: Remove lower basket, twist filter assembly counterclockwise, rinse under tap.
Clean spray arms monthly: Remove by pulling up, check nozzles for blockages.
Wipe door seals and interior with damp cloth.
Use dishwasher cleaner every 2 months to remove limescale.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Safety Features

Child Lock: Prevents program changes. Door Safety Lock: Door locks during wash; can be opened with force but stops cycle. Overflow Protection: Auto shut-off if leak detected.

Regulatory Information

CE compliant. Meets EU energy labeling and ecodesign requirements. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Door not closed/power	Ensure door latched; check power outlet; fuse intact.
Poor cleaning results	Overloaded/filters/detergent	Load correctly; clean filters; use fresh detergent; check spray arms.
Water not draining	Drain hose blocked/kinked	Check hose for kinks; clean filter; ensure drain height correct.
Salt/Rinse Aid light on	Low salt/rinse aid	Refill salt container and rinse aid dispenser.
Unusual noise	Spray arm obstructed	Check for utensils blocking spray arm rotation.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.