beko dishwasher BDFN36651XC manual

The Beko BDFN36651XC is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 5 wash programs, digital display, delay start function, child lock, half load option, and adjustable upper basket. It operates on 220-240V, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel interior, digital control panel, upper and lower spray arms, cutlery basket, detergent and rinse aid dispensers, water inlet and drain hoses.

Feature	Description
Capacity	14 place settings
Energy Rating	A++
Wash Programs	5 programs including Intensive, Eco, Quick, Glass, and Rinse
Delay Start	Programmable delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Saves water and energy for smaller loads
Adjustable Upper Basket	Height adjustable for taller items
Digital Display	Shows remaining time and program status
Water Softener	Adjustable for different water hardness levels
Acoustic Signal	Optional end-of-cycle signal

Installation

Unpack and inspect contents. Ensure location near water supply, drain, and power outlet.

Position dishwasher: Place on level floor near sink area.
Connect water supply: Attach inlet hose to cold water tap using supplied connector.
Connect drain hose: Route to sink drain or standpipe (max height 1m).
Level the appliance: Adjust feet until dishwasher is stable.
Connect to power: Plug into grounded 220-240V outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, run a wash cycle without dishes.

Remove shipping materials: Take out all interior packaging and transit bolts.
Fill salt reservoir: Add dishwasher salt to softener unit (if water is hard).
Fill rinse aid: Pour rinse aid into dispenser, adjust setting if needed.
Select language: Set display language via settings menu.
Run initial cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher-specific salt and rinse aid.

Specifications

Model: BDFN36651XC
Type: Freestanding dishwasher
Capacity: 14 place settings
Energy Rating: A++
Water Consumption: Approx. 9.5L per cycle (Eco program)
Power Consumption: Approx. 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85cm x 60cm x 60cm
Voltage: 220-240V, 50Hz
Programs: 5 wash programs + options

Controls and Settings

Control Panel: POWER, PROGRAM SELECTION, DELAY START, CHILD LOCK, HALF LOAD, START/PAUSE.

Programs: Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse (cold).

Settings: Water hardness (1-5), rinse aid level (1-4), acoustic signal on/off, language selection. Use PROGRAM button to cycle through options; press and hold for 3 seconds to enter settings menu.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues before loading.
Lower basket: For plates, pots, pans. Place items facing center.
Upper basket: For glasses, cups, bowls. Adjust height if needed.
Cutlery basket: Place knives pointing down, mixed cutlery for separation.
Ensure spray arms rotate freely and items do not block them.

Tip: Do not overload; water must reach all surfaces.

Using Wash Programs

Select program based on soil level and dish type.

Add detergent: Fill main wash compartment; use tablet if preferred.
Select program: Press PROGRAM until desired program lights up.
Add options: Press HALF LOAD for smaller loads; DELAY START to set delay.
Start: Close door firmly, press START/PAUSE. Display shows remaining time.
Pause/change: Press START/PAUSE to interrupt; change program during pause.
End of cycle: Acoustic signal (if enabled); door unlocks automatically after cool-down.

WARNING! Use only dishwasher detergent. Do not open door during hot cycles.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist out filter assembly, rinse under water weekly.
Clean spray arms: Check for clogs, remove debris.
Descale: Run empty cycle with dishwasher cleaner every 2 months if in hard water area.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Check salt and rinse aid: Refill as needed.

CAUTION! Unplug before any maintenance. Do not use sharp objects on filters.

Safety Information

Read all safety instructions before use.

Connect to grounded outlet only.
Do not wash items soiled with flammable substances.
Keep children away from open dishwasher; detergent can cause burns.
Do not sit or stand on open door.
Disconnect power before servicing.

WARNING! Risk of electric shock if used improperly.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Energy label according to EU regulation 1059/2010. Waste disposal: Dispose according to local regulations; contact municipal waste facility. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug and power; ensure door closed properly.
Poor cleaning results	Loading/detergent	Check loading; use correct amount of fresh detergent; clean filters.
Water not draining	Drain hose/filter	Check for kinks in hose; clean filter; ensure drain height correct.
Leaking water	Hoses/door seal	Tighten hose connections; check door seal for debris or damage.
Unusual noise	Spray arm/items	Ensure spray arms rotate freely; check for loose items touching arms.
Display shows error code	Various faults	Refer to error code list in manual; reset by turning power off/on.

Reset: Turn off at mains for 2 minutes, then restart.

Service: 0333 207 9710; www.beko.com