Beko Dishwasher BDFN38640XC Manual

The Beko BDFN38640XC is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and 46 dB noise level. It features 6 wash programs including Auto, Intensive, Eco, Quick, Delicate, and Glass, along with 4 temperature options, delay timer, child lock, half-load function, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, Upper and lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet/outlet hoses.

FeatureDescription
Capacity14 place settings
Energy RatingA++ (Energy efficient)
Noise Level46 dB (Quiet operation)
Wash Programs6 programs including Auto, Intensive, Eco, Quick, Delicate, Glass
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Half Load FunctionSaves water and energy for smaller loads
Salt & Rinse Aid IndicatorsLED indicators for refill reminders
DisplayDigital display with remaining time
Dimensions (HxWxD)85 x 60 x 60 cm

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
  3. Level the dishwasher: Adjust feet until machine is stable and level.
  4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, run an empty wash cycle with detergent.

  1. Fill salt container: Remove lower basket, unscrew cap, add 1 kg of dishwasher salt.
  2. Fill rinse aid dispenser: Open compartment on door, fill to MAX line.
  3. Select program: Choose Intensive program at highest temperature.
  4. Add detergent: Place in detergent dispenser (main wash and pre-wash compartments).
  5. Start cycle: Close door and press Start/Pause button.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Controls and Settings

Control Panel: Power button, Program selection buttons, Delay timer, Start/Pause, Half load, Child lock.

Program Selection: Press Program button repeatedly to cycle through options. Display shows program duration and temperature.

Options: Delay Timer (set 1-24 hours), Half Load (for fewer dishes), Extra Dry (extends drying time). Settings: Child Lock (hold Child Lock button for 3 seconds), Rinse aid level adjustment (1-5), Salt refill indicator.

Loading the Dishwasher

Upper basket: For glasses, cups, saucers, and small plates. Lower basket: For plates, pots, pans, and larger items. Cutlery basket: For knives, forks, spoons (handles down).

  1. Scrape off large food residues (no pre-rinsing required).
  2. Load dishes facing center, not touching each other.
  3. Place delicate items in upper basket securely.
  4. Ensure spray arms can rotate freely.

Tip: Refer to loading diagrams in manual for optimal placement.

Using Wash Programs

Select program based on soil level and dish type.

  1. Auto: Automatically adjusts time/temperature based on soil sensors.
  2. Intensive: For heavily soiled pots/pans (70°C, 180 min).
  3. Eco: Energy-saving for normally soiled dishes (50°C, 200 min).
  4. Quick: For lightly soiled loads (58°C, 30 min).
  5. Delicate: For fragile glassware/crystal (40°C, 90 min).
  6. Glass: For glasses with light stains (40°C, 70 min).

WARNING! Use only dishwasher-safe detergents. Do not use hand soap or laundry detergent.

Maintenance

Clean filter weekly: Remove lower basket, twist filter assembly counterclockwise, rinse under tap. Check spray arms monthly for blockages. Descale every 2-3 months using dishwasher cleaner.

Care & Cleaning

Unplug before cleaning exterior. Wipe control panel and door with damp cloth. Clean door seal regularly. Run empty hot wash monthly to remove grease buildup.

CAUTION! Do not use abrasive cleaners or scouring pads. Keep ventilation openings clear.

Regulatory Information

CE marked. Complies with EU directives for low voltage, electromagnetic compatibility, and eco-design. Energy label according to EU regulation 1059/2010. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower/child lockCheck power supply; ensure child lock is off; door closed properly.
Poor washing resultsFilter/spray armsClean filter; check spray arms for blockages; use correct detergent amount.
Water not drainingDrain hose/kinkCheck drain hose for kinks; ensure proper installation height.
Leaking waterDoor seal/hosesCheck door seal for damage; tighten water connections; level the machine.
Unusual noiseSpray arms/dishesEnsure dishes not touching spray arms; check for foreign objects in pump.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model number (BDFN38640XC) ready.

Beko Dishwasher BDFN38640XC Manual © - All Rights Reserved 2025