beko dishwasher BDFS15020B manual

The Beko BDFS15020B is a 15-inch built-in dishwasher with 12 place settings, 7 wash programs, A++ energy rating, 49 dB noise level, AquaIntense technology for tough stains, Half Load function, Delay Start up to 24 hours, child lock, salt and rinse aid indicators, and adjustable upper basket. Powered by 220-240V AC, 50Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, inlet and drain hoses.

Feature	Description
AquaIntense Technology	High-pressure spray for tough, dried-on food
Half Load Function	Eco wash for fewer dishes
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel during operation
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Adjustable Upper Basket	Height adjustable for taller items
7 Wash Programs	Includes Intensive, Eco, Quick, Glass, etc.
Digital Display	Shows program time, delay, and status
Filter System	Easy-clean triple filter
Energy Rating	A++ for energy efficiency

Installation

Unpack and inspect contents. Ensure installation space meets dimensions.

Position dishwasher: Place in prepared cabinet space under countertop.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Route to sink drain or standpipe (min height 40 cm).
Electrical connection: Plug into grounded 220-240V AC outlet.
Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks or shock.

First-Time Setup

Before first use, prepare dishwasher.

Remove transport materials: Take out all interior packaging and securing bolts.
Fill salt container: Add dishwasher salt up to rim, then add water until full.
Fill rinse aid dispenser: Open cap, fill to MAX line, close securely.
Run initial wash: Select Intensive program without dishes to clean interior.
Set water hardness: Use program button combination to match local water hardness.

CAUTION! Use only dishwasher salt and rinse aid specified for dishwashers. Do not use table salt.

Specifications

Model: BDFS15020B
Type: Built-in dishwasher
Place Settings: 12 standard
Energy Rating: A++
Water Consumption: Approx. 9.5 liters per cycle (Eco program)
Noise Level: 49 dB
Programs: 7 (Intensive, Eco, Quick 30', Glass, Auto, Hygiene, Rinse)
Dimensions (HxWxD): 82 x 59.8 x 55 cm
Power Supply: 220-240V AC, 50Hz
Power Consumption: 0.78 kWh per cycle (Eco program)

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Program Selection: Press repeatedly to cycle through: Intensive (70°C), Eco (50°C), Quick 30' (45°C), Glass (40°C), Auto (45-65°C), Hygiene (70°C), Rinse (cold).

Additional Functions: Delay Start (1-24 hours), Half Load (for lower basket only), Child Lock (press and hold Start/Pause for 3 seconds). Display shows remaining time, program, and indicator icons for salt, rinse aid, and child lock.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no pre-rinsing needed.
Lower basket: Plates, pots, pans. Place facing center.
Upper basket: Cups, glasses, small bowls. Adjust height if needed.
Cutlery basket: Forks, knives, spoons; mix types for separation.
Ensure spray arms rotate freely; do not block with large items.

Tip: Refer to loading diagrams in manual for best results. Do not overload.

Wash Programs

Select program based on soil level and dish type.

Intensive (70°C): Heavily soiled pots, pans.
Eco (50°C): Normally soiled dishes, daily use (energy saving).
Quick 30' (45°C): Lightly soiled, quick wash.
Glass (40°C): Delicate glassware, crystal.
Auto (45-65°C): Automatically adjusts temperature and time.
Hygiene (70°C): Baby bottles, high-temperature sanitizing.
Rinse (cold): Rinse only, no detergent.

WARNING! Use only dishwasher detergent. Do not use regular soap or washing powder.

Maintenance & Care

Regular maintenance ensures longevity.

Clean filter: Remove and rinse under tap weekly.
Check spray arms: Ensure holes are not clogged.
Refill salt: When salt indicator lights, add to container.
Refill rinse aid: When rinse aid indicator lights, fill to MAX.
Exterior cleaning: Wipe with damp cloth; no abrasive cleaners.
Monthly cleaning: Run empty on Intensive program with dishwasher cleaner.

CAUTION! Unplug before maintenance. Do not remove filter during operation.

Safety Information

Read all safety instructions before use.

Connect to grounded outlet only.
Do not open door during wash cycle; hot steam may escape.
Keep children away from open dishwasher and detergent.
Use only detergents, salt, and rinse aid designed for dishwashers.
Do not wash items soiled with flammable substances.
Disconnect power before any maintenance.

WARNING! Risk of electric shock if appliance is not installed and grounded properly.

Regulatory Information

This appliance complies with EU Directive 2014/35/EU (Low Voltage Directive) and 2014/30/EU (EMC Directive). CE marked. Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of packaging and appliance. For support, visit www.beko.com or contact local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check plug; ensure door closed properly; disable child lock.
Poor washing results	Loading, filter, detergent	Check loading; clean filter; use correct amount of fresh detergent.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks; clean filter; ensure standpipe height correct.
Salt indicator flashing	Salt low	Refill salt container; run short program to flush system.
Unusual noise	Spray arm, foreign objects	Check for items blocking spray arm; remove foreign objects from pump.
Leaking water	Hose connections, door seal	Tighten inlet/drain hoses; check door seal for debris or damage.

Reset: Turn off at mains for 2 minutes, then restart.

Service: Contact authorized Beko service. Do not attempt repairs yourself.