beko dishwasher BDFS15030W manual

The Beko BDFS15030W is a freestanding dishwasher with a 15-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, half-load option, child lock, and AquaIntense technology for intensive cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, digital display, control panel, water inlet and drain hoses.

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
2. Connect drain hose: Place in sink or connect to waste pipe (min height 40 cm).
3. Level the dishwasher: Adjust feet to ensure stability.
4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure to prevent leaks or shock. Do not kink hoses.

First-Time Setup

Before first use, run a wash cycle without dishes.

1. Remove packaging materials and transit bolts.
2. Fill salt reservoir (if water hardness > 4°dH) and rinse aid dispenser.
3. Select a program: Press POWER, then choose Intensive program.
4. Add detergent to main wash compartment.
5. Start cycle: Close door and press START/PAUSE.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

• Model: BDFS15030W
• Type: Freestanding Dishwasher
• Capacity: 15 place settings
• Energy Class: A++
• Water Consumption: 10 L per cycle (Eco program)
• Power Consumption: 0.78 kWh per cycle (Eco program)
• Voltage/Frequency: 220-240V, 50Hz
• Max Inlet Pressure: 1 MPa (10 bar)
• Noise Level: 49 dB
• Warranty: 2 years (parts and labor)

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Auto (65°C), Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Rinse (cold).

Settings: Delay Start (1-24 hrs), Half Load (reduces water/energy for upper basket), Child Lock (hold CHILD LOCK for 3 sec). Display shows remaining time, program, and error codes.

Loading the Dishwasher

Upper basket: Plates up to 24 cm, cups, glasses. Lower basket: Pots, pans, larger plates. Cutlery basket: Knives, forks, spoons (handles down).

1. Scrape off large food residues (no pre-rinsing needed).
2. Load dishes facing inward, not touching.
3. Place delicate items in upper basket.
4. Ensure spray arms rotate freely.

Tip: Do not overload; water must reach all surfaces.

Using Wash Programs

Select program based on soil level and dish type.

1. Add detergent: Fill main wash compartment; use pre-wash for heavily soiled loads.
2. Select program: Turn PROGRAM SELECTOR to desired cycle.
3. Optional settings: Press DELAY START or HALF LOAD if needed.
3. Start: Close door firmly; press START/PAUSE.
4. After cycle: Wait for door lock to release (approx. 2 min after end).

WARNING! Use only dishwasher detergent. Do not open door during hot cycles.

Care & Maintenance

Clean filter monthly: Remove lower basket, twist filter counterclockwise, rinse under tap. Wipe door seals and interior with damp cloth. Run empty cycle with dishwasher cleaner every 2 months.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Information

Keep children away from open dishwasher (hot surfaces). Use child lock. Do not sit or stand on open door. Ensure detergent is out of reach of children.

Regulatory Information

CE marked; complies with EU directives. Waste electrical products must not be disposed of with household waste. Contact local authority for recycling. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com