beko dishwasher BDFS16020W manual

The Beko BDFS16020W is a 60cm wide, freestanding dishwasher with a stainless steel interior, A++ energy rating, and a capacity for up to 14 place settings. It features 7 wash programs, including Eco, Intensive, and Quick, a digital display, delay timer, half-load option, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent and rinse aid dispensers, digital control panel, water inlet and drain hoses.

Installation

Unpack and inspect contents. Position near water supply, drain, and power outlet.

1. Level the dishwasher: Adjust the feet using a spanner to ensure it is stable.
2. Connect water supply: Attach the inlet hose to the cold water tap (max pressure 1 MPa).
3. Connect drain hose: Place the drain hose into a standpipe or sink, ensuring no kinks.
4. Connect to power: Plug into a properly grounded 220-240V, 50Hz socket.

WARNING! Installation must comply with local regulations. Do not use an extension cord. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a wash cycle without dishes to clean the interior.

1. Remove shipping materials: Check interior for any transit bolts or packaging and remove.
2. Fill rinse aid dispenser: Open the cap, fill to MAX line, and close securely.
3. Fill salt reservoir (if water is hard): Unscrew cap, add 1kg of dishwasher salt, then run a short program to dissolve.
4. Select language: Press and hold the Program and Delay buttons for 3 seconds to cycle through languages.
5. Run initial cycle: Add a small amount of detergent and select the Intensive program.

CAUTION! Only use detergents and rinse aids specifically designed for dishwashers.

Specifications

• Model: BDFS16020W
• Type: Freestanding
• Energy Class: A++
• Annual Energy Consumption: 237 kWh
• Water Consumption (Eco): Approx. 10 litres per cycle
• Noise Level: 49 dB(A)
• Number of Place Settings: 14
• Programs: 7 (Eco, Intensive, Auto, Quick 30', Delicate, Glass, Rinse)
• Power Supply: 220-240V ~ 50Hz
• Weight: Approx. 42 kg

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION button, DELAY START button, HALF LOAD button, CHILD LOCK button, START/PAUSE button.

Program Selection: Press repeatedly to cycle through: Eco (long, energy-saving), Intensive (for heavily soiled), Auto (sensor-based), Quick 30' (fast wash), Delicate (for fragile items), Glass (gentle for glassware), Rinse (rinse only).

Additional Functions: Delay Start (1-24 hrs), Half Load (reduces water and energy for smaller loads), Child Lock (press and hold for 3 seconds to activate/deactivate). The digital display shows remaining time, selected program, and active functions.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

1. Scrape off large food residues before loading.
2. Lower Basket: For pots, pans, plates, and larger items. Place plates facing the center.
3. Upper Basket: For glasses, cups, saucers, and smaller plates. Use the fold-down cup shelves.
4. Cutlery Basket: Place knives, forks, and spoons with handles down for safety, mixing items for better water flow.
5. Ensure spray arms can rotate freely and items do not block the detergent dispenser.

Tip: Do not overload. Place delicate items in the upper basket only.

Using Detergents and Rinse Aid

Use only dishwasher-specific products.

1. Detergent: Fill the main wash compartment (marked "II") for the selected program. Use tablets, powder, or gel. For the Quick 30' program, also fill the pre-wash compartment ("I").
2. Rinse Aid: The dispenser is located inside the door. Fill to MAX line. The consumption is adjustable via a dial inside the dispenser (1=lowest, 6=highest).
3. Salt: For hard water areas. Fill the salt reservoir located at the bottom of the tub. Use only regenerating salt for dishwashers.

WARNING! Do not mix different detergent types. Keep all products out of reach of children.

Care & Cleaning

Regular maintenance ensures longevity and performance.

1. Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners.
2. Monthly: Clean the filter assembly (located at the bottom of the tub) under running water.
3. Check and clean spray arm jets if blocked.
4. Run an empty cycle with a dishwasher cleaner or a cup of vinegar monthly to remove grease and limescale.
5. Wipe the door gasket clean.

CAUTION! Unplug the appliance before cleaning. Never use steam cleaners.

Safety Information

Read all instructions before use.

• This appliance is for household use only.
• Do not open the door during a wash cycle as hot steam may escape.
• Keep children away from the appliance when in operation.
• Sharp items (knives) should be placed pointing downwards in the cutlery basket.
• Do not wash items soiled with flammable or explosive substances.
• If the supply cord is damaged, it must be replaced by the manufacturer or a qualified technician.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). The symbol of the crossed-out wheeled bin indicates that the product must be disposed of separately at the end of its life. For disposal, contact your local authority. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Reset: Unplug the appliance for 5 minutes, then plug back in.

Service: For issues not resolved above, contact authorized Beko service. Do not attempt repairs yourself.