beko dishwasher BDFS26020WQ manual

The Beko BDFS26020WQ is a 60cm wide, freestanding dishwasher with a stainless steel interior, 12 place settings capacity, A++ energy rating, and multiple wash programs. It features a digital display, delay start, half load option, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, digital display, and control panel.

Feature	Description
Capacity	12 standard place settings
Energy Rating	A++ (Energy Efficient)
Water Consumption	Approx. 9.5 litres per cycle (Eco program)
Noise Level	49 dB (Quiet operation)
Programs	Auto, Intensive, Eco, Quick, Glass, 90 Min
Delay Start	1-24 hours
Half Load	Option for washing fewer dishes
Child Lock	Prevents accidental program changes
Display	Digital with remaining time indicator
Dimensions (HxWxD)	85 x 60 x 60 cm

Installation

Unpack and inspect contents. Place near water inlet, drain, and power socket.

Positioning: Ensure dishwasher is level on a stable floor.
Water Connection: Connect inlet hose to cold water supply (max pressure 1 MPa).
Drain Connection: Connect drain hose to sink waste or standpipe.
Electrical Connection: Plug into a grounded 220-240V, 50Hz socket.
Final Check: Ensure all connections are secure and hoses are not kinked.

WARNING! Installation must be performed by a qualified technician. Ensure water and electrical connections comply with local regulations.

First-Time Setup

Before first use, prepare the dishwasher.

Remove shipping materials: Take out all brackets and tapes inside the tub.
Fill salt: Unscrew salt container cap, fill with special dishwasher salt, then tighten.
Fill rinse aid: Open rinse aid dispenser, fill to MAX line, close.
Run initial cycle: Select the Intensive program without dishes to clean the interior.

CAUTION! Only use salt specifically designed for dishwashers. Do not use table salt.

Specifications

Model: BDFS26020WQ
Type: Freestanding
Width: 60 cm
Capacity: 12 place settings
Energy Class: A++
Water Consumption (Eco): ~9.5 L
Power Supply: 220-240V, 50Hz
Max Power: 2000 W
Programs: 6 main programs + options
Drying System: Condensation drying
Child Lock: Yes
Delay Start: 1-24 hours

Controls and Settings

Control Panel: ON/OFF button, Program selector, Delay Start, Half Load, Start/Pause, Child Lock.

Display Icons: Program indicator, Delay Start, Salt warning, Rinse Aid warning, Child Lock, End of cycle.

Program Selection: Turn knob to choose program (Auto, Intensive, Eco, Quick, Glass, 90 Min). Options: Press Delay Start to set timer (1-24h). Press Half Load for fewer dishes. Press and hold Child Lock for 3 seconds to activate/deactivate.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues.
Lower Basket: For plates, pots, pans. Place items facing centre.
Upper Basket: For glasses, cups, small bowls. Angle items downward.
Cutlery Basket: Place knives (handles up), spoons and forks mixed.
Detergent: Use only dishwasher detergent. Fill main wash and pre-wash compartments as per program.

Tip: Do not overload. Ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

Program	Use For	Temp (°C)	Time (min)
Auto	Mixed daily loads	45-65	~105
Intensive	Heavily soiled pots/pans	70	~150
Eco	Normally soiled, energy saving	50	~200
Quick	Lightly soiled, quick wash	40	~30
Glass	Delicate glassware	40	~75
90 Min	Daily wash, good performance	65	90

To start: Close door firmly, select program, press Start/Pause. The display will show remaining time.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist and lift out filter assembly. Rinse under tap weekly.
Clean spray arms: Check for blockages, rinse.
Check salt level: Refill when salt indicator light comes on.
Check rinse aid: Refill when rinse aid indicator light comes on.
Exterior: Wipe with damp cloth. Do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not run dishwasher without filters.

Safety Information

This appliance is for household use only.
Do not open door during wash cycle; hot steam may escape.
Keep children away from open dishwasher and detergent.
Only use detergents and rinse aids designed for dishwashers.
Do not sit or stand on the open door.
Disconnect power before servicing.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of packaging and old appliance. For support, visit www.beko.com or contact your local Beko service centre.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Door not closed, no power	Close door firmly, check plug and power supply.
Poor cleaning results	Overloaded, wrong program, clogged filter	Load correctly, select suitable program, clean filter.
Water not draining	Drain hose kinked, filter blocked	Straighten hose, clean filter.
Salt indicator light on	Salt container empty	Refill with dishwasher salt.
Rinse aid indicator light on	Rinse aid low	Refill rinse aid dispenser.
Unusual noise	Spray arm hitting dishes, foreign object	Rearrange load, check for small objects in pump.
Leaking	Door seal damaged, hose connection loose	Check seal, tighten hose connections.

Reset: Turn off at mains for 2 minutes, then restart.

Service: For persistent issues, contact authorised Beko service: www.beko.com/support.