beko dishwasher BDFS26020XQ manual

The Beko BDFS26020XQ is a freestanding dishwasher with a 12-place setting capacity, featuring an A++ energy rating, 6 wash programs, half-load option, delay timer, child lock, and AquaIntense technology for improved cleaning performance. It includes a stainless steel interior, adjustable upper basket, cutlery basket, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt and rinse aid compartments, water inlet and drain hoses.

Feature	Description
Capacity	12 standard place settings
Energy Rating	A++ (Energy Efficient)
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, etc.
Half Load Option	Reduces water and energy for smaller loads
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
AquaIntense Technology	Enhanced spray system for better cleaning
Adjustable Upper Basket	Height adjustable for taller items
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Digital Display	Shows remaining time, program, and status

Installation

Unpack and inspect contents. Ensure location is near water supply, drain, and power outlet.

Position dishwasher: Place on level floor near sink area.
Connect water supply: Attach inlet hose to cold water tap (ensure filter is clean).
Connect drain hose: Route to sink drain or standpipe (use provided hose clip).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet (do not use extension cord).
Level the appliance: Adjust feet to ensure stability.

WARNING! Installation must comply with local plumbing and electrical regulations. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging and securing brackets inside.
Fill salt reservoir: Open cap, add 1.5kg of dishwasher salt, then run a short rinse program.
Fill rinse aid: Open dispenser, fill to MAX line with rinse aid, set dial to position 3-4.
Run initial cycle: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher-specific salt and rinse aid. Do not use table salt.

Specifications

Model: BDFS26020XQ
Type: Freestanding Dishwasher
Capacity: 12 place settings
Energy Class: A++
Water Consumption: Approx. 9-12 liters per cycle (Eco program)
Power Consumption: Approx. 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz
Programs: Intensive, Eco, Quick (30 min), Glass, Auto, Hygiene

Controls and Settings

Control Panel: POWER button, Program selection buttons, Delay Timer, Half Load, Child Lock, Start/Pause.

Programs: Intensive (70°C for heavily soiled), Eco (50°C, energy saving), Quick (30 min for lightly soiled), Glass (40°C for delicate), Auto (sensor-based), Hygiene (70°C with extra rinse).

Settings: Delay Timer (1-24 hours), Half Load (activates for smaller loads), Child Lock (hold for 3 seconds to activate/deactivate). Display shows remaining time, program icon, and salt/rinse aid indicators.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing required).
Lower basket: For plates, pots, pans. Adjust plate supports as needed.
Upper basket: For glasses, cups, small bowls. Height adjustable.
Cutlery basket: Place knives handles down, spoons/forks mixed for separation.
Ensure spray arms can rotate freely; do not block with large items.

Tip: Place heavily soiled items facing the center spray arm. Do not overload.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Select program: Press corresponding program button (Eco recommended for daily use).
Add options: Press HALF LOAD if applicable; set DELAY TIMER if needed.
Start: Close door firmly, press START/PAUSE. Display shows remaining time.
After cycle: Wait for cycle end beep; open door slightly to allow steam escape before unloading.

WARNING! Do not open door during wash cycle; hot steam may cause burns. Use door handle.

Maintenance & Care

Regular maintenance ensures longevity.

Clean filter: Remove lower basket, twist and lift out filter assembly, rinse under tap weekly.
Check spray arms: Ensure holes are not clogged; rotate manually to confirm free movement.
Refill salt: When salt indicator lights, add dishwasher salt to reservoir (use funnel).
Refill rinse aid: When rinse aid indicator lights, fill dispenser to MAX line.
Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects to clean spray arms.

Safety Information

Read all instructions before use. Keep children away from open door and detergent. Use only dishwasher detergent; do not use washing-up liquid. Ensure door is closed during operation. Disconnect power before servicing.

WARNING! Risk of electric shock. Do not operate if cord or appliance is damaged. Contact authorized service.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2009/125/EC (Ecodesign). Waste disposal: Do not dispose with household waste. Use authorized collection points. For support, visit www.beko.com or contact local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check plug, ensure door closed properly, deactivate child lock.
Poor cleaning results	Loading, filter, detergent	Rearrange load, clean filter, use correct amount of fresh detergent.
Water not draining	Drain hose, filter blockage	Check hose for kinks, clean filter, ensure drain height is correct.
Leaking water	Door seal, hose connections	Check door seal for debris, tighten hose connections, ensure level.
Unusual noise	Spray arm, foreign objects	Check for items blocking spray arm, remove any loose objects.
Salt/Rinse Aid indicator on	Low levels	Refill salt and/or rinse aid as needed.

Reset: Turn off power for 5 minutes, then restart.

Service: Contact authorized Beko service: www.beko.com/support