Beko Dishwasher BDIN16420 Manual

The Beko BDIN16420 is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, child lock, half-load option, and rinse aid/salt indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, digital display, control panel.

FeatureDescription
Capacity14 place settings
Energy RatingA++ (energy efficient)
Wash ProgramsAuto, Intensive, Eco, Quick, Glass, Rinse
Delay Start1-24 hours delay timer
Child LockPrevents accidental program changes
Half LoadOption for smaller loads to save water/energy
Salt & Rinse Aid IndicatorsLED alerts for refilling
Digital DisplayShows remaining time, program, and status
Dimensions (HxWxD)85 x 60 x 60 cm
Water Pressure0.5 - 10 bar

Installation

Unpack and inspect contents. Ensure location is level, near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max 1m length).
  2. Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
  3. Level the appliance: Adjust feet to ensure stability.
  4. Plug into grounded power outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, run an empty wash cycle with detergent.

  1. Fill salt dispenser: Located at bottom of tub; use only dishwasher salt.
  2. Fill rinse aid dispenser: Located inside door; adjust dosage as needed.
  3. Select program: Choose Intensive cycle for initial setup.
  4. Add detergent: Use recommended dishwasher detergent in dispenser.
  5. Start cycle: Close door and press Start/Pause.

CAUTION! Do not use regular table salt. Only use products designed for dishwashers.

Specifications

Controls and Settings

Control Panel: Power On/Off, Program selection buttons, Delay Start, Half Load, Child Lock, Start/Pause.

Display Icons: Program indicator, remaining time, salt/rinse aid alerts, child lock symbol.

Program Selection: Press program button repeatedly to cycle through options. Delay Start: Press Delay button, then use +/- to set hours. Child Lock: Press and hold Child Lock for 3 seconds to enable/disable. Half Load: Activates when loading only one basket to save resources.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues (no pre-rinsing needed).
  2. Lower basket: Plates, pots, pans (face inward).
  3. Upper basket: Glasses, cups, small bowls (angled downward).
  4. Cutlery basket: Forks, knives, spoons (handles down for safety).
  5. Ensure items do not block spray arms.

Tip: Place delicate items in upper basket. Do not overload.

Using Wash Programs

Select program based on soil level and dish type.

  1. Auto: Sensors adjust water/temperature for optimal cleaning.
  2. Intensive: For heavily soiled pots/pans (70°C).
  3. Eco: Energy-efficient for normally soiled dishes (50°C).
  4. Quick: 30-minute cycle for lightly soiled items.
  5. Glass: Gentle cycle for crystal/glassware.
  6. Rinse: Rinse only, no detergent needed.

WARNING! Use only dishwasher-safe items. Plastic items on upper rack only.

Maintenance & Care

Regular maintenance ensures longevity.

  1. Clean filters: Remove and rinse under water weekly.
  2. Check spray arms: Ensure holes are not clogged.
  3. Descale: Use dishwasher cleaner every 2-3 months if in hard water area.
  4. Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects on filters.

Safety Features

Child Lock: Prevents program changes during operation. Door Safety: Dishwasher stops if door opened mid-cycle. Overflow Protection: Auto shut-off if water level too high. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE Marked: Complies with EU safety and environmental standards. WEEE Directive: Do not dispose with household waste; recycle appropriately. Energy Label: A++ rating per EU regulation 1059/2010. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorCheck plug; ensure door closed properly; child lock off.
Poor cleaning resultsLoading/detergentRearrange items; check spray arms; use correct detergent amount.
Water not drainingFilter/drain hoseClean filter; check drain hose for kinks/clogs.
Leaking waterHose connectionsTighten inlet/drain hoses; check door seal for debris.
Unusual noiseSpray arm/itemsEnsure spray arms rotate freely; check items not touching arms.
Salt/Rinse Aid light onLow levelRefill respective dispenser.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; keep model number ready.

Beko Dishwasher BDIN16420 Manual © - All Rights Reserved 2025