beko dishwasher BDIN16520 manual

The Beko BDIN16520 is a 16-inch built-in dishwasher with energy efficiency class A, 12 place settings capacity, 6 wash programs including Intensive, Eco, and Quick cycles, delay start timer up to 24 hours, half-load option, child lock, salt and rinse aid indicators, and adjustable upper basket. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, water inlet and drain hoses.

Feature	Description
Control Panel	Digital display with program selection buttons
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, etc.
Delay Start	Timer delay up to 24 hours
Half Load Option	Economical wash for fewer dishes
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when water softener salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Adjustable Upper Basket	Height adjustable for taller items
Energy Efficiency	Class A rating for lower power consumption
Capacity	12 place settings standard

Installation

Unpack and inspect contents. Ensure installation area is level and near water/drain connections.

Connect water supply: Attach inlet hose to water tap using provided connector.
Connect drain hose: Route to sink drain or standpipe; ensure no kinks.
Electrical connection: Plug into grounded 120V AC outlet.
Secure in cabinet: Adjust leveling feet; secure to adjacent cabinets if required.

WARNING! Dishwasher must be installed by qualified personnel. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

Remove shipping materials: Check interior for any transit blocks or tapes.
Fill salt container: Add专用盐 up to rim; run a rinse cycle to flush system.
Fill rinse aid: Pour into dispenser until MAX line; adjust dosage setting.
Select language: Use settings menu to choose display language (default ENGLISH).
Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Use only dishwasher salt and rinse aid specified in manual. Do not use table salt.

Specifications

Type: Built-in dishwasher.
Capacity: 12 place settings.
Energy Class: A.
Water Consumption: Approx. 11 liters per cycle (Eco program).
Power Consumption: 0.95 kWh per cycle (Eco program).
Programs: 6 wash programs + extra functions.
Delay Start: 1-24 hours.
Dimensions (HxWxD): 820 x 598 x 550 mm.
Voltage/Frequency: 120V AC, 60Hz.
Noise Level: 49 dB(A).

Controls and Settings

Access controls via front panel buttons and digital display.

Buttons: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Auto, Rinse. Settings: Rinse aid dosage (1-5), water hardness setting (1-5), acoustic signal on/off, language selection. Indicators: Salt low, rinse aid low, end of cycle, door open.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans. Position facing center.
Upper basket: Glasses, cups, small bowls. Use adjustable height for tall items.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Detergent: Use only dishwasher detergent; fill main and pre-wash compartments as needed.

Tip: Do not overload; ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Load dishes and add detergent.
Select program: Press PROGRAM button to cycle through options.
Optional: Set DELAY START if desired; activate HALF LOAD for fewer dishes.
Start: Close door firmly; press START/PAUSE.
During cycle: Door locks automatically; progress shows on display.
End of cycle: Acoustic signal sounds; door can be opened after a few minutes.

WARNING! Do not open door during hot wash phases; steam may cause burns.

Maintenance & Care

Regular maintenance ensures longevity and performance.

Clean filters: Remove lower basket; twist out filter assembly; rinse under water weekly.
Clean spray arms: Check for blockages; rinse holes.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months if in hard water area.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Door seal: Wipe clean to prevent mold.

CAUTION! Unplug before any maintenance. Do not use sharp objects to clean spray arms.

Safety Features

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Door lock: Automatically locks during wash; unlocks at safe temperature. Overflow protection: Automatically stops water if detected. Thermal safety: Prevents overheating.

Regulatory Information

This appliance complies with relevant safety standards. CE marked. Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. For support, visit www.beko.com or contact 1-800-944-2904.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug; ensure door closed properly; child lock may be on.
Poor cleaning results	Loading/detergent	Check spray arms rotate freely; use correct detergent amount; clean filters.
Water not draining	Drain hose blockage	Check hose for kinks; clean filter; ensure drain height correct.
Leaking water	Door seal/hose	Check door seal for debris; ensure hoses connected tightly.
Unusual noise	Foreign objects	Check for small items in pump area; ensure dishes not touching spray arms.
Salt indicator on	Salt low	Refill salt container; run a short cycle to dissolve.

Reset: Turn off power for 5 minutes, then restart.

Service: 1-800-944-2904; www.beko.com