beko dishwasher BDIN26430 manual

The Beko BDIN26430 is a 60 cm wide built-in dishwasher with 14 place settings, A++ energy rating, 49 dB noise level, and features including Half Load option, Intensive Wash program, Glass Care program, Delay Start (up to 24 hours), Child Lock, Salt and Rinse Aid indicators, and AquaIntense technology for improved cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, Upper and Lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet and drain hoses.

Installation

Unpack and inspect contents. Ensure installation space meets requirements.

1. Position the dishwasher: Place in the prepared cabinet space under the countertop.
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Ensure proper height (min 40 cm, max 100 cm from floor).
4. Connect to power: Plug into a grounded 220-240V, 50Hz socket.
5. Level the appliance: Adjust feet to ensure dishwasher is stable and level.

WARNING! Installation must be performed by a qualified technician. Ensure water and electrical connections are secure to prevent leaks and hazards.

First-Time Setup

Before first use, prepare the dishwasher.

1. Remove transport materials: Take out all packaging and securing brackets inside.
2. Fill salt container: Add special dishwasher salt to the softener unit (located at the bottom of the tub).
3. Fill rinse aid dispenser: Open dispenser cap and fill with rinse aid up to the MAX mark.
4. Run a maintenance cycle: Select the Intensive program and run without dishes to clean the interior.
5. Set water hardness: Use the program buttons to set the level according to your local water hardness.

CAUTION! Only use dishwasher salt in the designated container. Do not use table salt.

Specifications

• Type: Built-in Dishwasher.
• Width/Height/Depth: 60 x 82 x 55 cm (installation dimensions).
• Capacity: 14 place settings.
• Energy Class: A++.
• Annual Energy Consumption: 237 kWh.
• Water Consumption: Approx. 10.5 liters per cycle (Eco program).
• Programs: Intensive, Eco, Glass Care, Rapid, Half Load, Auto.
• Noise Level: 49 dB.
• Power Supply: 220-240V, 50Hz.
• Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Access controls via the front panel. Digital display shows program duration, remaining time, and status icons.

Buttons: POWER ON/OFF, PROGRAM SELECTION (Intensive, Eco, Glass Care, Rapid, Auto), HALF LOAD, DELAY START (1-24h), START/PAUSE, CHILD LOCK.

Settings: Water hardness level (1-5), Rinse aid dosage (1-5), Acoustic signal on/off. Indicators: Salt refill, Rinse aid refill, End of cycle. To activate Child Lock, press and hold START/PAUSE and HALF LOAD for 3 seconds.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

1. Scrape off large food residues from dishes before loading.
2. Lower basket: For pots, pans, plates, and larger items. Place plates facing the center.
3. Upper basket: For glasses, cups, saucers, and smaller dishes. Use the foldable cup shelves.
4. Cutlery basket: Place knives, forks, spoons with handles down for safety. Mix items to prevent nesting.
5. Ensure spray arms can rotate freely and no items block them.

Tip: Do not overload the baskets. Place delicate items in the upper basket only.

Using Detergents and Additives

Use only detergents and additives designed for dishwashers.

1. Detergent: Fill the main wash detergent dispenser (located on the door) with powder, tablet, or gel. Close the lid firmly.
2. Rinse Aid: Automatically dispensed during the final rinse to improve drying and prevent spots. Refill when indicator light is on.
3. Salt: Regenerates the water softener. Refill when indicator light is on. Use only granular dishwasher salt.
4. Pre-wash detergent: For heavily soiled loads, a small amount can be added to the pre-wash chamber or directly into the tub.

WARNING! Do not mix different types of detergents. Keep all detergents out of reach of children.

Programs and Cycles

Select the program based on soil level and dish type.

To start a program: Load dishes, add detergent, select program, press START/PAUSE. The door locks automatically.

Care & Cleaning

Regular maintenance ensures longevity and performance.

1. Clean the exterior: Use a soft, damp cloth. Do not use abrasive cleaners.
2. Clean the interior: Remove and rinse the filters under running water weekly.
3. Clean spray arms: Check for clogs in the holes and ensure they rotate freely.
4. Door seals: Wipe clean with a damp cloth to prevent mold.
5. Run a maintenance cycle: Monthly, use a dishwasher cleaner or run an empty cycle on Intensive program with a cup of vinegar placed upright in the upper basket.

CAUTION! Always disconnect from power before cleaning. Never use steam cleaners.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority for recycling advice. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Reset: Turn off power at socket for 2 minutes, then restart.

Service: For issues not resolved, contact authorized Beko service: www.beko.com.