Beko Dishwasher BDIN36520Q Manual

The Beko BDIN36520Q is a 60cm wide built-in dishwasher with an energy rating of A++, 12 place settings capacity, 6 wash programs including Eco, Intensive, and Quick Wash, delay timer up to 24 hours, half-load option, child lock, salt and rinse aid indicators, and adjustable upper basket. It features a stainless steel interior, electronic control panel, and operates at 49 dB noise level. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, stainless steel tub, adjustable upper basket, cutlery basket, filter system, salt container, rinse aid dispenser.

Installation

Unpack and inspect contents. Ensure proper location near water, drain, and power supply.

1. Position dishwasher: Place in cabinet cutout (60cm wide).
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Ensure proper drainage into sink or waste pipe.
4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
5. Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks or shocks.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

1. Remove transport materials: Take out all packaging inside and outside.
2. Fill salt container: Add dishwasher salt to softener (first use requires water filling).
3. Fill rinse aid: Pour rinse aid into dispenser, adjust dosage setting (1-4).
4. Run initial wash: Run an empty cycle with detergent to clean interior.
5. Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

• Model: BDIN36520Q
• Type: Built-in dishwasher
• Width: 60 cm
• Capacity: 12 place settings
• Energy Rating: A++
• Water Consumption: Approx. 9.5 liters per cycle (Eco program)
• Power Consumption: 0.78 kWh per cycle (Eco program)
• Noise Level: 49 dB
• Programs: 6 (Eco, Intensive, Auto, Quick 60', Delicate, Glass)
• Supply Voltage: 220-240V, 50Hz
• Max Inlet Pressure: 1 MPa (10 bar)
• Dimensions (HxWxD): 82 x 59.8 x 55 cm

Controls and Settings

Electronic control panel with LED display and touch buttons.

Buttons: Power On/Off, Program Selection, Delay Start, Half Load, Child Lock, Start/Pause.

Programs: Eco (energy-saving), Intensive (for heavily soiled), Auto (sensor-based), Quick 60' (fast wash), Delicate (for fragile items), Glass (gentle for glassware). Settings: Delay timer (1-24 hours), half load option (for lower basket only), child lock (press and hold for 3 seconds), rinse aid dosage adjustment, water hardness setting.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying.

1. Scrape off large food residues before loading.
2. Lower basket: For plates, pots, pans. Adjustable rack for larger items.
3. Upper basket: For glasses, cups, small plates. Height adjustable.
4. Cutlery basket: Place knives, forks, spoons with handles down.
5. Use detergent: Add to dispenser (powder, tablets, or gel).
6. Close door securely before starting.

Tip: Do not overload. Ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

1. Power on: Press Power button.
2. Select program: Press Program button to cycle through options.
3. Add options: Set Delay Start or Half Load if needed.
4. Start: Press Start/Pause. Door locks automatically.
5. During cycle: Display shows remaining time. Press Start/Pause to pause.
6. End of cycle: Acoustic signal sounds. Wait a few minutes before opening.

Program Guide: Eco for daily use, Intensive for pots/pans, Quick 60' for lightly soiled, Delicate for china, Glass for crystal.

Maintenance

Regular maintenance ensures performance and longevity.

1. Clean filters: Remove and rinse under water weekly.
2. Check spray arms: Ensure holes are not clogged.
3. Refill salt: When salt indicator lights, add to container.
4. Refill rinse aid: When rinse aid indicator lights, fill dispenser.
5. Clean interior: Wipe door seals and interior with damp cloth.
6. Run empty hot cycle: Monthly with dishwasher cleaner.

WARNING! Unplug before maintenance. Do not use abrasive cleaners.

Care & Cleaning

Exterior: Clean with soft damp cloth and mild detergent. Do not use abrasive pads.

Interior: Keep filters clean. Remove food debris from sump.

CAUTION! Do not use steam cleaners. Avoid water contact with control panel.

Regulatory Information

CE Marking: Complies with European directives. WEEE: Do not dispose with household waste; recycle appropriately. Energy Label: A++ rating according to EU regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model number ready.