beko dishwasher BDIN36530 manual

The Beko BDIN36530 is a built-in dishwasher with a 14-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, electronic control panel, delay start, child lock, half-load option, and AquaIntense technology for intensive cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Wash Programs 8. Care & Maintenance 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel tub, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, electronic display, and control panel.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (energy efficient)
Wash Programs	7 programs including Intensive, Eco, Quick, Glass
AquaIntense Technology	Enhanced cleaning performance for tough stains
Delay Start	Programmable delay up to 24 hours
Child Lock	Prevents accidental program changes
Half Load Option	Reduces water and energy for smaller loads
Display	LED digital display with remaining time indicator
Water Softener	Adjustable salt container for hard water areas
Rinse Aid Indicator	Alerts when rinse aid is low

Installation

Unpack and inspect contents. Ensure proper water and electrical connections.

Position dishwasher: Place in built-in cabinet space (60cm width).
Connect water supply: Attach inlet hose to cold water tap (max pressure 1MPa).
Connect drainage: Secure drain hose to sink or waste pipe (min height 40cm).
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet to ensure stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks or hazards.

First-Time Setup

Before first use, prepare the dishwasher and set basic parameters.

Remove shipping materials: Take out all interior packaging and transit bolts.
Fill salt container: Add dishwasher salt to softener (first use only).
Fill rinse aid: Pour rinse aid into dispenser up to MAX mark.
Run initial cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt or other substitutes.

Specifications

Model: BDIN36530
Type: Built-in dishwasher
Capacity: 14 place settings
Energy Class: A++
Water Consumption: 9.5 liters per cycle (Eco program)
Power Consumption: 0.78 kWh per cycle (Eco program)
Noise Level: 49 dB(A)
Dimensions (HxWxD): 82 x 60 x 55 cm
Voltage: 220-240V, 50Hz
Max Inlet Water Pressure: 1 MPa (10 bar)
Min Inlet Water Pressure: 0.03 MPa (0.3 bar)

Controls and Settings

Control Panel: POWER button, program selection buttons, DELAY START, CHILD LOCK, HALF LOAD, START/PAUSE.

Program Selection: Intensive (70°C), Eco (50°C), Quick (45°C), Glass (40°C), Auto, Rinse, Prewash.

Display Indicators: Remaining time, program progress, salt warning, rinse aid warning, child lock active.

Settings Menu: Access by holding PROGRAM button for 3 seconds. Adjust: water hardness (H1-H6), rinse aid dosage (1-5), acoustic signal on/off.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues before loading.
Upper basket: Cups, glasses, small plates, plastic items.
Lower basket: Plates, pots, pans, larger items.
Cutlery basket: Knives, forks, spoons (handles down).
Ensure items do not block spray arms or detergent dispenser.
Load according to manufacturer's loading diagrams.

Tip: Place heavily soiled items facing center where water spray is strongest.

Wash Programs

Select program based on soil level and dish type.

Program	Temperature	Duration	Best For
Intensive	70°C	155 min	Heavily soiled pots, pans
Eco	50°C	200 min	Normally soiled dishes (energy saving)
Quick	45°C	30 min	Lightly soiled, quick wash
Glass	40°C	85 min	Glassware, delicate items
Auto	45-65°C	105-145 min	Automatic soil detection
Rinse	Cold	15 min	Rinse only (no detergent)
Prewash	Cold	20 min	Pre-rinse before main wash

Note: Eco program provides best energy efficiency for daily use.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filters: Remove and rinse under water weekly.
Clean spray arms: Check for blockages monthly.
Descale: Run empty cycle with dishwasher cleaner every 2-3 months.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Door seals: Clean with soft cloth to prevent leaks.

CAUTION! Unplug before maintenance. Do not use sharp objects to clean filters or spray arms.

Safety Features

Child Lock: Press and hold CHILD LOCK button for 3 seconds to activate/deactivate.

Overflow Protection: Built-in float switch prevents overfilling.

Leak Protection: Base pan collects small leaks; automatic shut-off for major leaks.

Door Safety: Door locks during operation; opens automatically when cycle completes and temperature is safe.

Regulatory Information

CE Marking: Complies with European Directives. WEEE Symbol: Do not dispose with household waste. For disposal, contact local authorities. Energy Label: A++ rating according to EU regulation 1059/2010. Manufacturer: Beko PLC, UK. For support, visit www.beko.co.uk or contact 0333 207 9710.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power supply, door not closed	Check power outlet; ensure door is properly closed.
Poor cleaning results	Overloading, wrong program	Load correctly; select appropriate program; check filters.
Water not draining	Drain hose blocked/kinked	Check drain hose; clean filter; ensure proper installation height.
Noise during operation	Spray arm hitting dishes	Rearrange load; check for foreign objects in spray arm.
Salt/rinse aid indicators on	Containers empty	Refill salt and/or rinse aid.
Water leakage	Hose connections, door seal	Tighten connections; clean door seal; check for damage.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.co.uk