beko dishwasher BDIN36532 manual

The Beko BDIN36532 is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 7 wash programs including Eco, Intensive, and Quick Wash, delay timer up to 24 hours, half-load option, child lock, salt and rinse aid indicators, and adjustable upper basket. Designed for standard kitchen installation with water and electrical connections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, salt container, rinse aid dispenser, filter system, and inlet/outlet hoses.

Feature	Description
Capacity	14 place settings
Energy Rating	A++ (Energy Efficient)
Wash Programs	7 programs including Eco, Intensive, Quick, Glass, etc.
Delay Timer	Up to 24 hours delay start
Half Load Option	Reduces water and energy for smaller loads
Child Lock	Prevents accidental program changes
Salt & Rinse Aid Indicators	LED indicators for refill reminders
Adjustable Upper Basket	Height adjustable for taller items
Digital Display	Shows program time, delay, and status
Acoustic Signal	Beeps when program finishes

Installation

Unpack and inspect contents. Position near water supply and drain.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or standpipe (min height 40 cm).
Level the dishwasher: Adjust feet for stability.
Connect to power: Plug into grounded 220-240V, 50Hz outlet.

WARNING! Ensure water connections are tight to prevent leaks. Do not kink hoses.

First-Time Setup

Before first use, prepare dishwasher.

Fill salt container: Remove lower basket, unscrew cap, add 1 kg dishwasher salt, fill with water.
Fill rinse aid dispenser: Open dispenser lid, fill to MAX line, close lid.
Run empty wash: Select Intensive program without dishes to clean interior.
Load detergent: Add detergent to dispenser according to program.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding dishwasher.
Capacity: 14 place settings.
Energy Class: A++.
Water Consumption: Approx. 10 liters per cycle (Eco program).
Power Consumption: Approx. 0.95 kWh per cycle (Eco program).
Programs: 7 (Eco, Intensive, Quick 30', Glass, 90', Auto, Rinse).
Noise Level: 49 dB (A).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Eco (energy saving), Intensive (for heavily soiled), Quick 30' (fast wash), Glass (gentle), 90' (standard), Auto (sensor-based), Rinse (rinse only).

Settings: Delay Start (1-24 hours), Half Load (reduces consumption), Child Lock (hold 3 sec to activate/deactivate). Display: Shows remaining time, program, delay, and salt/rinse aid indicators.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues.
Load lower basket: Plates, pots, pans facing center.
Load upper basket: Cups, glasses, small bowls.
Cutlery basket: Place knives, forks, spoons with handles down.
Adjust upper basket: Lift to accommodate tall items.
Ensure spray arms rotate freely.

Tip: Do not overload; water must reach all surfaces.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press POWER.
Select program: Turn PROGRAM SELECTOR.
Set options: Press DELAY START or HALF LOAD if needed.
Add detergent: Fill dispenser (main wash and pre-wash).
Start: Press START/PAUSE; door locks automatically.
After cycle: Wait for acoustic signal; open door slightly to dry.
Unload: Remove lower basket first.

WARNING! Do not open door during wash; hot steam may escape.

Maintenance & Care

Regular maintenance ensures longevity.

Clean filter: Remove lower basket, twist filter assembly, rinse under water weekly.
Check spray arms: Remove and clear holes if blocked.
Refill salt: When indicator lights, add salt to container.
Refill rinse aid: When indicator lights, fill dispenser.
Exterior cleaning: Wipe with damp cloth; no abrasive cleaners.

CAUTION! Unplug before maintenance. Do not use sharp objects on spray arms.

Safety Features

Child Lock: Prevents program changes. Door Lock: Auto-locks during wash. Overflow Protection: Float switch stops water if detected. Thermal Cut-out: Prevents overheating.

Regulatory Information

CE Mark: Complies with EU directives. WEEE: Do not dispose with household waste; recycle appropriately. Energy Label: A++ rating according to EU regulation 1059/2010. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug; ensure door closed properly; press POWER.
Water not entering	Tap/filter	Ensure tap open; check inlet hose filter for blockages.
Poor cleaning results	Loading/detergent	Rearrange load; use correct detergent amount; clean filter.
Water not draining	Drain hose	Check hose for kinks; ensure standpipe height min 40 cm.
Noise during wash	Spray arm/items	Ensure spray arms rotate freely; check for loose items.
Salt indicator on	Low salt	Refill salt container; run short program to reset.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center.