beko dishwasher BDIN36640 manual

The Beko BDIN36640 is a freestanding dishwasher with a 14-place setting capacity, featuring an A++ energy rating, 6 wash programs, digital display, delay timer, half-load option, child lock, and salt/rinse aid indicators. It operates on 220-240V, 50Hz power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, water inlet/outlet hoses.

Feature	Description
Digital Display	Shows program time, settings, and status indicators
6 Wash Programs	Includes Intensive, Eco, Quick, Glass, Auto, and Rinse
Delay Timer	Program start delay up to 24 hours
Half-Load Option	Reduces water and energy for smaller loads
Child Lock	Locks control panel to prevent accidental changes
Salt/Rinse Aid Indicators	LED alerts for refilling salt and rinse aid
A++ Energy Rating	High energy efficiency classification
14 Place Settings	Standard capacity for place settings
AquaStop Protection	Leak protection system for water supply hose
Adjustable Upper Basket	Height adjustable for taller items

Installation

Unpack and inspect contents. Position near water supply and drain.

Connect water supply: Attach inlet hose to water tap (ensure AquaStop is connected).
Connect drain hose: Place hose into sink or dedicated drain pipe (max height 1m).
Level the dishwasher: Adjust feet to ensure machine is level and stable.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

Fill salt container: Remove lower basket, unscrew salt cap, add 1kg dishwasher salt, fill with water until overflow.
Fill rinse aid dispenser: Open dispenser lid on door, fill to MAX line with rinse aid.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness (see manual).

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

Type: Freestanding dishwasher.
Capacity: 14 place settings.
Energy Rating: A++.
Water Consumption: Approx. 9-12 liters per cycle (Eco program).
Power Consumption: Approx. 0.78 kWh per cycle (Eco program).
Noise Level: 49 dB(A).
Programs: 6 wash programs + options.
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Voltage/Frequency: 220-240V, 50Hz.
Inlet Water Pressure: 0.04-1 MPa.

Controls and Settings

Control Panel: ON/OFF button, Program selection buttons, Delay Timer, Half Load, Start/Pause, Child Lock.

Programs: Intensive (70°C), Eco (50°C), Quick (45 min), Glass (40°C), Auto (45-65°C), Rinse (cold).

Options: Delay Timer (1-24h), Half Load (for upper basket only), Child Lock (press 3 sec). Indicators: Salt, Rinse Aid, End, Clean Filter. Settings: Water hardness (1-5), acoustic signal on/off.

Loading the Dishwasher

Upper basket: Cups, glasses, small plates. Lower basket: Plates, pots, pans. Cutlery basket: Knives, forks, spoons.

Scrape off large food residues (no pre-rinsing required).
Load dishes facing center, not touching each other.
Place delicate items in upper basket, heavily soiled items in lower basket.
Ensure spray arms can rotate freely.

Tip: Refer to loading diagrams in manual for optimal arrangement.

Using Wash Programs

Select program based on soil level and dish type.

Turn on: Press ON/OFF button.
Select program: Press corresponding program button (LED lights).
Add options: Press Delay Timer or Half Load if desired.
Start: Press Start/Pause; door locks automatically.
Pause/Add items: Press Start/Pause to pause; wait 3 sec to open door.
End of cycle: Acoustic signal sounds; "End" indicator lights.
Turn off: Press ON/OFF after unloading.

WARNING! Do not open door during hot wash phases; steam may cause burns.

Maintenance & Cleaning

Monthly maintenance ensures optimal performance.

Clean filter: Remove lower basket, twist and lift out filter assembly, rinse under water.
Clean spray arms: Remove by unscrewing, check nozzles for blockages.
Wipe door seals and interior with damp cloth.
Run empty hot wash with dishwasher cleaner monthly.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Regulatory Information

CE compliant; meets EU energy labeling and ecodesign requirements. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/door	Check plug and power; ensure door is closed properly.
Water not entering	Tap/filter	Ensure water tap is open; check inlet hose filter for blockages.
Poor washing results	Loading/spray arms	Rearrange dishes; clean filter and spray arms; add salt/rinse aid.
Water not draining	Drain hose	Check drain hose for kinks; clean filter; ensure drain height ≤1m.
Error codes displayed	Various faults	Refer to manual error code list; reset by turning off/on.

Reset: Turn off at mains for 2 minutes, then restart.

Service: 0333 207 9710; www.beko.com