beko dishwasher BDIN38521Q manual

The Beko BDIN38521Q is a freestanding dishwasher with a capacity of 12 place settings, featuring an A++ energy rating, 6 wash programs, half-load option, delay timer, child lock, and AquaIntense technology for improved cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, water inlet and drain hoses.

Feature	Description
Capacity	12 place settings
Energy Rating	A++
Wash Programs	6 programs including Intensive, Eco, Quick, Glass, etc.
Half-Load Option	Reduces water and energy consumption for smaller loads
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
AquaIntense Technology	Enhanced spray system for better cleaning
Digital Display	Shows remaining time, program, and status
Salt Container	For water softening
Rinse Aid Dispenser	For improved drying results

Installation

Unpack and inspect contents. Ensure location is near water supply, drain, and power outlet.

Position dishwasher: Place on level floor near sink area.
Connect water supply: Attach inlet hose to cold water tap using supplied connector.
Connect drain hose: Route to sink drain or standpipe; ensure no kinks.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure to prevent leaks and hazards.

First-Time Setup

Before first use, prepare the dishwasher.

Remove transport materials: Take out all packaging and securing items inside.
Fill salt container: Add dishwasher salt to the softener unit (located in the bottom of the tub).
Fill rinse aid: Pour rinse aid into the dispenser in the door.
Run initial wash: Select the Intensive program without dishes to clean interior and remove residues.
Set water hardness: Use the program buttons to set according to local water hardness (see manual).

CAUTION! Use only dishwasher salt, rinse aid, and detergents specifically designed for dishwashers.

Specifications

Model: BDIN38521Q
Type: Freestanding Dishwasher
Capacity: 12 place settings
Energy Rating: A++
Water Consumption: Approx. 10 liters per Eco cycle
Power Consumption: Approx. 0.95 kWh per Eco cycle
Noise Level: 49 dB(A)
Programs: 6 (Intensive, Eco, Quick 30', Glass, Auto, Rinse)
Dimensions (HxWxD): 85 x 60 x 60 cm
Voltage/Frequency: 220-240V, 50Hz

Controls and Settings

Control Panel: POWER ON/OFF, PROGRAM SELECTION buttons, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Indicators: Selected program, remaining time, delay timer, salt/rinse aid refill alerts, child lock icon.

Program Selection: Press PROGRAM button to cycle through options. Delay Timer: Press DELAY to set start time (1-24 hours). Half Load: Activates when only one basket is used. Child Lock: Press and hold CHILD LOCK for 3 seconds to enable/disable. Settings: Water hardness, acoustic signal, and rinse aid dosage can be adjusted in settings mode (see manual).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues; no need to pre-rinse.
Lower basket: For plates, pots, pans. Adjustable rack height for taller items.
Upper basket: For glasses, cups, small bowls. Fold-down cup shelves for stemware.
Cutlery basket: Place knives, forks, spoons with handles down for safety.
Detergent: Use tablet, powder, or gel in the dispenser. Close lid firmly.

Tip: Do not overload; ensure spray arms can rotate freely. Place delicate items in upper basket.

Using Wash Programs

Select program based on soil level and dish type.

Intensive: For heavily soiled pots and pans (70°C).
Eco: Energy-efficient for normally soiled dishes (50°C).
Quick 30': For lightly soiled loads, quick wash (30 minutes).
Glass: Gentle cycle for delicate glassware (40°C).
Auto: Automatically adjusts time/temp based on soil sensors.
Rinse: Rinse only, no detergent, for items to be washed later.

To start: Close door, select program, press START/PAUSE. To pause: Press START/PAUSE during cycle; press again to resume. To cancel: Hold START/PAUSE for 3 seconds.

WARNING! Do not open door during hot cycles; steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filters: Remove lower basket, twist and lift out filter assembly; rinse under water weekly.
Clean spray arms: Check for blockages; remove if necessary to clear debris.
Refill salt: When salt indicator lights, add salt to container (ensure no water in compartment).
Refill rinse aid: When rinse aid indicator lights, fill dispenser.
Exterior cleaning: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not use sharp objects to clean spray arms.

Safety Information

Read all instructions before use. Keep children away from open door and detergent compartment. Use only detergents for dishwashers. Do not wash items soiled with flammable substances. Ensure door is closed during operation. Disconnect power before servicing.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. For support, visit www.beko.com or contact your local Beko service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check plug, socket, and power; ensure door closed properly; check child lock status.
Poor cleaning results	Loading, detergent, filters	Load correctly; use fresh detergent; clean filters; check spray arms for blockages.
Water not draining	Drain hose, filter blockage	Check drain hose for kinks; clean filter; ensure standpipe height is correct.
Leaking water	Hose connections, door seal	Tighten inlet/drain hoses; check door seal for debris/damage; ensure dishwasher is level.
Unusual noise	Spray arm, foreign objects	Check for items touching spray arm; remove foreign objects from pump area.
Display shows error code	Various faults	Refer to manual for specific error code meaning; try resetting by turning power off/on.

Reset: Turn off power for 5 minutes, then restart.

Service: For persistent issues, contact authorized Beko service: www.beko.com/support.