beko dishwasher BDIN38531D manual

The Beko BDIN38531D is a freestanding dishwasher with a capacity of 13 place settings, featuring an A++ energy rating, 6 wash programs, digital display, delay start function, child lock, half-load option, and AquaIntense technology for improved cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, detergent dispenser, rinse aid dispenser, salt container, filter system, and AquaIntense spray arm.

FeatureDescription
Capacity13 place settings
Energy RatingA++
Wash Programs6 programs including Intensive, Eco, Quick, Glass, etc.
Digital DisplayShows program status, time remaining, and options
Delay StartProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Half-Load OptionReduces water and energy for smaller loads
AquaIntense TechnologyEnhanced spray system for better cleaning
Water SoftenerAdjustable salt container for hard water areas
Filter SystemSelf-cleaning filter with easy removal

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

  1. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  2. Connect drain hose: Ensure proper height (40-100 cm from floor) to prevent siphoning.
  3. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  4. Level the dishwasher: Adjust feet until unit is stable and level.

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

  1. Fill salt container: Remove lower basket, twist open salt cap, fill with dishwasher salt (first time: add 1 liter water).
  2. Fill rinse aid: Open dispenser on door, fill to MAX line with rinse aid.
  3. Select language: Press and hold START for 3 seconds to cycle through display languages.
  4. Run initial cycle: Run an empty wash with detergent on Intensive program to clean interior.

CAUTION! Use only dishwasher salt in salt container. Regular salt may damage the softener.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Display Icons: Program indicator, time remaining, salt warning, rinse aid warning, child lock, delay start.

Program Selection: Turn PROGRAM SELECTOR to choose: Intensive (70°C, heavy soil), Eco (50°C, energy saving), Quick (30 min, light soil), Glass (40°C, delicate), Auto (sensor-based), Rinse (no detergent). Options: DELAY START (1-24 hours), HALF LOAD (for upper or lower basket only), CHILD LOCK (press 3 sec to activate).

Loading the Dishwasher

Proper loading ensures optimal cleaning.

  1. Scrape off large food residues; no need to pre-rinse.
  2. Lower basket: Plates, pots, pans (face center).
  3. Upper basket: Glasses, cups, small bowls (angled downward).
  4. Cutlery basket: Place knives (handles up), spoons/forks mixed.
  5. Detergent: Use only dishwasher detergent in dispenser (powder, tablets, or liquid).

Tip: Do not overload; ensure spray arms can rotate freely.

Using Wash Programs

Select program based on load type.

  1. Load dishwasher and close door securely.
  2. Turn POWER on; display lights up.
  3. Select program with PROGRAM SELECTOR.
  4. Set options if needed (DELAY START, HALF LOAD).
  5. Press START/PAUSE; cycle begins (door locks).
  6. After cycle ends, wait 2 minutes before opening (steam hazard).
  7. Unload lower basket first to prevent dripping.

WARNING! Do not open door during wash; hot water/steam may cause burns.

Care & Maintenance

Regular maintenance ensures longevity.

  1. Clean filter monthly: Twist and lift out filter assembly, rinse under tap.
  2. Check spray arms: Ensure holes are not clogged; remove and clean if needed.
  3. Refill salt: When salt indicator lights, add dishwasher salt (only in salt container).
  4. Refill rinse aid: When rinse aid indicator lights, fill to MAX line.
  5. Exterior cleaning: Wipe with damp cloth; no abrasive cleaners.

CAUTION! Unplug before any maintenance. Do not use sharp objects on spray arms.

Safety Information

Read all instructions before use. Keep children away from open dishwasher (hot surfaces). Use only dishwasher detergent; other soaps cause excess suds. Ensure door is closed during operation. Disconnect power before servicing.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU Regulation 1059/2010. Waste disposal: Follow local regulations; do not dispose with household waste. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher not startingPower/doorCheck plug; ensure door closed securely; press START firmly.
Poor cleaning resultsLoading/detergentRearrange load; ensure spray arms free; use fresh detergent.
Water not drainingFilter/drain hoseClean filter; check drain hose for kinks; ensure proper height.
Salt indicator onSalt lowRefill salt container with dishwasher salt.
Unusual noiseSpray arm/foreign objectCheck for items touching spray arm; remove foreign objects.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com

beko dishwasher BDIN38531D manual © - All Rights Reserved 2025