beko dishwasher BDIN38540 manual

The Beko BDIN38540 is a freestanding dishwasher with a 14-place setting capacity, energy efficiency class A, 8 wash programs including Eco, Intensive, and Quick Wash, delay start timer, child lock, salt and rinse aid indicators, adjustable upper basket, half-load option, and aquastop protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, water inlet and drain hoses.

Feature	Description
Capacity	14 place settings
Energy Class	A (energy efficient)
Wash Programs	8 programs including Eco, Intensive, Quick
Delay Start	1-24 hours delay timer
Child Lock	Prevents accidental program changes
Salt Indicator	Alerts when regenerating salt is low
Rinse Aid Indicator	Alerts when rinse aid needs refilling
Adjustable Upper Basket	Height adjustable for taller items
Half Load Option	Saves water and energy for smaller loads
Aquastop	Protection against water leaks

Installation

Unpack and inspect contents. Ensure location is level and near water/drain connections.

Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Place hose into sink or standpipe (min height 40 cm).
Level the dishwasher: Adjust feet to ensure machine is stable and level.
Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Ensure water and electrical connections are secure before first use. Do not kink hoses.

First-Time Setup

Before first wash, prepare the dishwasher.

Add salt: Fill salt container with special dishwasher salt (approx. 1 kg).
Add rinse aid: Fill rinse aid dispenser to MAX line.
Run initial empty cycle: Select Intensive program without dishes to clean interior.
Set water hardness: Use program buttons to set according to local water hardness.

CAUTION! Only use dishwasher salt in salt container. Do not use table salt.

Specifications

Type: Freestanding dishwasher.
Capacity: 14 place settings.
Energy Rating: A.
Water Consumption: Approx. 11 liters per cycle (Eco program).
Power Consumption: Approx. 0.95 kWh per cycle (Eco program).
Noise Level: 49 dB(A).
Programs: 8 (Eco, Intensive, Auto, Quick 30', Delicate, Glass, Pre-Rinse, Half Load).
Dimensions (HxWxD): 85 x 60 x 60 cm.
Power Supply: 220-240V, 50Hz.
Water Pressure: 0.03-1 MPa.

Controls and Settings

Control Panel: ON/OFF button, program selection buttons, delay start button, child lock button, start/pause button.

Display Icons: Salt indicator, rinse aid indicator, program progress, delay time, child lock active.

Program Selection: Press program button repeatedly to cycle through options. Delay Start: Press delay button, then use +/- to set hours (1-24). Child Lock: Press and hold child lock button for 3 seconds to activate/deactivate. Starting: Press start/pause to begin selected program.

Loading the Dishwasher

Proper loading ensures optimal cleaning.

Scrape off large food residues (no pre-rinsing needed).
Lower basket: Plates, pots, pans (facing center).
Upper basket: Glasses, cups, small bowls (angled downward).
Cutlery basket: Knives, forks, spoons (handles down, mixed types).
Adjust upper basket height if needed for tall items.

Tip: Do not overload. Ensure spray arms can rotate freely.

Using Wash Programs

Select program based on soil level and dish type.

Eco: Energy-efficient for normally soiled dishes (approx. 3 hours).
Intensive: For heavily soiled pots and pans (75°C).
Quick 30': Lightly soiled dishes, quick wash.
Auto: Automatically adjusts time/temp based on soil sensors.
Delicate: For fine china and crystal (low temperature).
Glass: For glasses and lightly soiled items.
Pre-Rinse: Holds dishes until full load.
Half Load: For smaller loads, saves water/energy.

WARNING! Use only dishwasher detergents. Do not use regular soap.

Care & Maintenance

Regular maintenance ensures longevity.

Clean filter: Remove and rinse under water weekly.
Check spray arms: Ensure holes are not clogged.
Refill salt: When salt indicator lights, add salt (water may overflow during filling).
Refill rinse aid: When rinse aid indicator lights, fill to MAX line.
Exterior cleaning: Wipe with damp cloth, mild detergent.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power/child lock	Check power supply; ensure child lock is off; door properly closed.
Poor cleaning results	Loading/detergent	Check loading; use correct amount of fresh detergent; clean filter.
Water not draining	Drain hose clogged	Check drain hose for kinks/clogs; clean filter.
Salt indicator on	Salt empty	Refill salt container; run short program to reset indicator.
Noise during operation	Spray arm obstruction	Check for items blocking spray arms; ensure baskets properly positioned.
Leaking water	Hose connections	Check inlet/drain hose connections; ensure door seal is clean and intact.

Reset: Unplug for 5 minutes, then reconnect.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.