beko dishwasher BDIN38560C manual

The Beko BDIN38560C is a 60cm wide integrated dishwasher with 14 place settings, A++ energy rating, 5 wash programs, delay timer, child lock, half load option, and AquaIntense technology for improved cleaning. It features a stainless steel interior, adjustable upper basket, cutlery basket, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Detergents & Additives 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel, spray arms, filters, detergent dispenser, salt container, rinse aid dispenser, upper and lower baskets, cutlery basket.

FeatureDescription
Energy RatingA++ for energy efficiency
Place Settings14 standard place settings capacity
Wash Programs5 programs including Intensive, Eco, Quick, Glass, and Auto
AquaIntense TechnologyEnhanced spray system for better cleaning results
Delay TimerProgram start delay up to 24 hours
Child LockPrevents accidental program changes
Half Load OptionReduces water and energy for smaller loads
Salt & Rinse Aid IndicatorsLED indicators for refill reminders
Adjustable Upper BasketHeight adjustment for taller items
Stainless Steel InteriorDurable and hygienic interior surface

Installation

Unpack and inspect contents. Ensure installation surface is level and sturdy.

  1. Position dishwasher: Place in prepared cabinet space or freestanding location.
  2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
  3. Connect drain hose: Ensure proper drainage into sink or waste pipe.
  4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  5. Secure installation: Adjust leveling feet for stability.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before use.

First-Time Setup

Before first use, prepare the dishwasher and set basic parameters.

  1. Remove shipping materials: Take out all transit bolts and packaging.
  2. Fill salt container: Add dishwasher salt to softener unit (first use only).
  3. Fill rinse aid dispenser: Add rinse aid to maximum level.
  4. Run empty wash: Select Intensive program without dishes to clean interior.
  5. Set water hardness: Adjust softener setting according to local water hardness.

CAUTION! Use only dishwasher salt in salt container. Do not use table salt.

Specifications

Controls and Settings

Control Panel: ON/OFF button, program selection buttons, delay timer, start/pause, child lock, half load option.

Program Selection: Press corresponding button for desired program. LED indicates selection.

Delay Timer: Press delay button repeatedly to set start time (1-24 hours). Child Lock: Press and hold child lock button for 3 seconds to activate/deactivate. Half Load: Select when washing smaller loads to save resources. Salt Indicator: Lights when salt needs refilling. Rinse Aid Indicator: Lights when rinse aid is low.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

  1. Scrape off large food residues before loading.
  2. Load lower basket: Plates, pots, pans facing center.
  3. Load upper basket: Cups, glasses, small bowls.
  4. Cutlery basket: Place knives, forks, spoons with handles down.
  5. Adjust upper basket: Lift to higher position for taller items.
  6. Ensure items don't block spray arms or detergent dispenser.

Tip: Do not overload. Leave space between items for water circulation.

Using Detergents & Additives

Use only dishwasher-specific products.

  1. Detergent: Add to main dispenser compartment. Use tablet, powder, or gel.
  2. Rinse Aid: Fill dispenser until MAX indicator. Adjust dosage level if needed.
  3. Salt: Fill salt container when indicator lights. Use only dishwasher salt.
  4. Special additives: Use dishwasher cleaner monthly for maintenance.

WARNING! Do not use regular washing detergent. Keep all products out of children's reach.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean filters: Remove and rinse under water weekly.
  2. Clean spray arms: Check for blockages monthly.
  3. Wipe door seals: Clean with damp cloth to prevent leaks.
  4. Run empty wash: Monthly with dishwasher cleaner.
  5. Check drain hose: Ensure no kinks or blockages.

CAUTION! Unplug before maintenance. Do not use abrasive cleaners.

Safety Features

Child Lock: Prevents accidental program changes. Overflow Protection: Automatic shut-off if water level is too high. Thermal Protection: Prevents overheating. Door Safety: Dishwasher stops if door opened during cycle.

Regulatory Information

CE marked: Complies with European directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Energy Label: A++ rating according to EU regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startPower supply/doorCheck power connection; ensure door is properly closed.
Poor cleaning resultsLoading/detergentImprove loading; use correct detergent amount; clean filters.
Water not drainingDrain hose/filterCheck drain hose for kinks; clean filter system.
Leaking waterDoor seal/hoseCheck door seal for damage; ensure hose connections are tight.
Unusual noiseSpray arm/itemsCheck for items touching spray arms; remove obstructions.
Salt indicator onLow saltRefill salt container with dishwasher salt.
Rinse aid indicator onLow rinse aidRefill rinse aid dispenser.

Reset: Turn off at mains for 5 minutes, then restart.

Service: Contact authorized Beko service center. Keep model number (BDIN38560C) ready.

beko dishwasher BDIN38560C manual © - All Rights Reserved 2025