Beko Dishwasher BDIN38640C Manual

The Beko BDIN38640C is a built-in dishwasher with a capacity for up to 14 place settings, featuring 7 wash programs, A++ energy rating, 48 dB noise level, AquaIntense technology for intensive cleaning, Half Load option, Delay Start function, child lock, and salt/rinse aid indicators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, Upper and Lower baskets, Cutlery basket, Filter system, Salt container, Rinse aid dispenser, Water inlet/outlet connections.

Installation

Unpack and inspect contents. Ensure proper water and electrical connections.

1. Position the dishwasher: Place in built-in cabinet space (60 cm standard).
2. Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
3. Connect drain hose: Ensure proper drainage into sink or waste pipe.
4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
5. Level the appliance: Adjust feet for stability.

WARNING! Installation must be performed by a qualified technician. Ensure water and electrical connections are secure to prevent leaks or hazards.

First-Time Setup

Before first use, prepare the dishwasher and set basic functions.

1. Remove transport materials: Take out all packaging and securing items.
2. Fill salt container: Add dishwasher salt (only for models with water softener).
3. Fill rinse aid dispenser: Pour rinse aid up to MAX mark.
4. Run initial wash: Select Intensive program without dishes to clean interior.
5. Set water hardness: Adjust setting according to local water hardness.

CAUTION! Use only dishwasher-specific salt and rinse aid. Do not use regular table salt.

Specifications

• Type: Built-in dishwasher.
• Capacity: 14 place settings.
• Energy Class: A++.
• Water Consumption: Approx. 10 liters per cycle (Eco program).
• Power Consumption: Approx. 0.95 kWh per cycle (Eco program).
• Noise Level: 48 dB.
• Programs: 7 (Intensive, Eco, Quick 30', Glass, Auto, Hygiene, Rinse).
• Dimensions (HxWxD): 82 x 60 x 55 cm.
• Voltage/Frequency: 220-240V, 50Hz.
• Inlet Water Pressure: 0.03 - 1 MPa.

Controls and Settings

Access programs and settings via control panel buttons and digital display.

Control Panel: POWER ON/OFF, PROGRAM SELECTION, DELAY START, HALF LOAD, CHILD LOCK, START/PAUSE.

Programs: Intensive (75°C), Eco (50°C), Quick 30' (30 min), Glass (40°C), Auto (45-65°C), Hygiene (70°C), Rinse (cold). Settings: Delay Start (1-24 hours), Half Load (for lower basket only), Child Lock (press and hold for 3 seconds), Water hardness adjustment (1-5). Display: Shows selected program, remaining time, salt/rinse aid indicators, error codes.

Loading the Dishwasher

Proper loading ensures optimal cleaning and drying results.

1. Scrape off large food residues before loading.
2. Upper basket: For glasses, cups, saucers, and small plates.
3. Lower basket: For plates, pots, pans, and larger items.
4. Cutlery basket: Place knives, forks, spoons with handles down.
5. Ensure items do not block spray arms or detergent dispenser.

Tip: Place heavily soiled items facing the center for better water spray coverage.

Using Detergents & Additives

Use only dishwasher-specific detergents and additives.

1. Detergent: Fill main detergent compartment according to soil level (15-25 g).
2. Pre-wash detergent: For heavily soiled loads, add small amount to pre-wash compartment.
3. Rinse aid: Fill dispenser; adjust dosage level (1-5) based on water hardness.
4. Salt: Fill salt container only when indicator light is on (for water softener models).

WARNING! Do not use hand washing detergent, soap, or other cleaning agents. They can cause excessive suds and damage the appliance.

Maintenance & Cleaning

Regular maintenance ensures longevity and performance.

1. Clean filters: Remove and rinse under running water weekly.
2. Clean spray arms: Check for blockages and clean holes with a soft brush.
3. Wipe door seals: Clean with damp cloth to prevent mold.
4. Descale: Run empty cycle with dishwasher cleaner every 2-3 months if in hard water area.
5. Exterior: Clean with mild detergent and soft cloth.

CAUTION! Unplug appliance before cleaning. Do not use abrasive cleaners or scouring pads.

Safety Features

Child Lock: Prevents accidental program changes. Door safety lock: Door cannot be opened during high-temperature cycles. Overflow protection: Automatically stops water intake if leak detected. Thermal protection: Motor protection against overheating.

Regulatory Information

CE Marking: Complies with European Low Voltage and EMC directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle according to local regulations. Energy Label: A++ rating according to EU regulation 1059/2010. For support, visit www.beko.com or contact local authorized service center.

Troubleshooting

Reset: Turn off power for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com