beko dishwasher BDIN38640D manual

The Beko BDIN38640D is a freestanding dishwasher with a 14-place setting capacity, A++ energy rating, and multiple wash programs. It features a stainless steel interior, digital display, delay start, child lock, half-load option, and AquaIntense technology for improved cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stainless steel tub, digital control panel, upper and lower baskets, cutlery basket, detergent and rinse aid dispensers, filters, and inlet/drain hoses.

Installation

Unpack and inspect contents. Ensure location is level, near water supply and drain.

1. Connect water inlet: Attach inlet hose to water tap (max pressure 1 MPa).
2. Connect drain hose: Place hose into sink or drain pipe (min height 40 cm).
3. Level the dishwasher: Adjust feet to ensure machine is stable.
4. Plug into grounded power outlet (220-240V, 50Hz).

WARNING! Do not bend or kink hoses. Ensure electrical plug is accessible.

First-Time Setup

Before first use, run a wash cycle without dishes.

1. Remove packaging and secure transit bolts.
2. Fill salt reservoir (if water hardness > 6°dH).
3. Fill rinse aid dispenser (adjust setting 1-4).
4. Add detergent to main dispenser.
5. Select Intensive program and run empty cycle.

CAUTION! Use only dishwasher salt and rinse aid. Do not use table salt.

Specifications

• Model: BDIN38640D
• Type: Freestanding Dishwasher
• Capacity: 14 place settings
• Energy Consumption: 0.74 kWh per cycle (Eco program)
• Water Consumption: 9.5 liters per cycle (Eco program)
• Programs: Auto, Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Hygiene
• Delay Start: 1-24 hours
• Power Supply: 220-240V, 50Hz
• Net Weight: 44 kg

Controls and Settings

Control Panel: ON/OFF button, program selector, delay start, child lock, half load, start/pause.

Programs: Auto (senses soil), Intensive (tough stains), Eco (energy saving), Quick (light soil), Glass (delicate), Hygiene (sanitize).

Settings: Adjust rinse aid dosage (1-4), salt refill indicator, water hardness setting (0-6). Use ON/OFF to power; program selector to choose cycle; delay for timed start; child lock prevents changes.

Loading the Dishwasher

Upper basket: Cups, glasses, small plates. Lower basket: Plates, pots, pans. Cutlery basket: Knives, forks, spoons.

1. Scrape off large food residues.
2. Load dishes facing center spray arm.
3. Ensure items do not block spray arms.
4. Place delicate items in upper basket.

Tip: Do not overload; allow water circulation.

Using Wash Programs

Select program based on soil level and dish type.

1. Add detergent to dispenser (main wash and pre-wash).
2. Close detergent door firmly.
3. Select program via control knob.
4. Press START/PAUSE to begin cycle.
5. Delay start: Press DELAY, set hours, then START.
6. Child lock: Press and hold CHILD LOCK for 3 seconds.
7. Half load: Press HALF LOAD for fewer dishes.

WARNING! Use only dishwasher detergent. Do not use hand soap.

Care & Maintenance

Clean filters monthly: Remove lower basket, twist filter assembly, rinse under tap.

Clean spray arms: Check for blockages, rinse with water.

Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before maintenance. Do not remove filters during cycle.

Safety Information

Keep children away from open door (hot surfaces).

Do not open door during wash cycle (hot steam).

Only connect to grounded outlet with correct voltage.

Disconnect power before servicing.

Regulatory Information

CE marked; complies with EU directives. Energy label A++. Waste electrical products must not be disposed with household waste. Recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Reset: Turn off at mains for 2 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com