beko dishwasher BDIN38641D manual

The Beko BDIN38641D is a built-in dishwasher with a 14-place setting capacity, featuring multiple wash programs, energy efficiency class A, delay start, child lock, half load option, and a digital display. It includes a salt and rinse aid indicator, adjustable upper basket, and cutlery basket. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Using Wash Programs 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital control panel, upper and lower baskets, cutlery basket, filter system, salt container, rinse aid dispenser, water inlet and drain hoses.

Feature	Description
Capacity	14 place settings
Energy Class	A (energy efficient)
Wash Programs	Auto, Intensive, Eco, Quick, Glass, Rinse
Delay Start	1-24 hours delay timer
Child Lock	Prevents accidental program changes
Half Load	Option for smaller loads to save water/energy
Digital Display	Shows remaining time, program, and alerts
Salt & Rinse Aid Indicator	Lights alert when refill is needed
Adjustable Upper Basket	Height adjustable for taller items
Cutlery Basket	Removable for easy loading

Installation

Unpack and inspect contents. Ensure proper water and electrical connections.

Position dishwasher: Place in built-in cabinet space, ensuring level footing.
Connect water supply: Attach inlet hose to cold water tap (max pressure 1 MPa).
Connect drain hose: Route to sink drain or standpipe, avoid kinks.
Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
Secure door: Adjust leveling feet to ensure door closes properly.

WARNING! Ensure water and electrical connections are secure to prevent leaks or shocks. Use only recommended hoses.

First-Time Setup

Before first use, prepare dishwasher and set basic functions.

Remove transport materials: Take out any shipping bolts or brackets.
Fill salt container: Add dishwasher salt up to rim, then run a rinse cycle.
Fill rinse aid: Pour into dispenser, set dial to level 3-4 initially.
Select language: Press and hold START for 3 seconds to toggle display language.
Run initial empty cycle: Select Intensive program without dishes to clean interior.

CAUTION! Only use dishwasher-specific salt and rinse aid. Do not use table salt.

Specifications

Model: BDIN38641D Built-in Dishwasher
Capacity: 14 standard place settings
Energy Rating: A
Water Consumption: Approx. 10-12 liters per cycle (Eco program)
Power Supply: 220-240V, 50Hz
Max Power: 2000W
Noise Level: 49 dB(A)
Dimensions (HxWxD): 820 x 598 x 550 mm
Net Weight: 42 kg
Programs: Auto, Intensive (70°C), Eco (50°C), Quick (30 min), Glass, Rinse

Controls and Settings

Control Panel: POWER, PROGRAM selector, DELAY START, CHILD LOCK, HALF LOAD, START/PAUSE.

Display Icons: Program indicator, remaining time, salt/rinse aid alert, child lock symbol.

Program Selection: Turn PROGRAM knob to desired wash program. Delay Start: Press DELAY, then use +/- to set hours (1-24). Child Lock: Press and hold CHILD LOCK for 3 seconds to enable/disable. Half Load: Press HALF LOAD when loading only one basket. Start/Pause: Press START/PAUSE to begin or interrupt cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

Scrape off large food residues; no need to pre-rinse.
Lower basket: Plates, pots, pans; ensure items do not block spray arm.
Upper basket: Cups, glasses, small bowls; adjust height if needed.
Cutlery basket: Place knives, forks, spoons with handles down (except sharp knives).
Use recommended detergent: Fill dispenser according to water hardness and soil level.

Tip: Do not overload; ensure water spray can reach all surfaces.

Using Wash Programs

Select program based on load type and soil level.

Auto: Sensors adjust water and temperature for mixed loads.
Intensive: For heavily soiled pots/pans (70°C, approx. 150 min).
Eco: Energy-saving for normally soiled dishes (50°C, approx. 180 min).
Quick: Lightly soiled, quick wash (30 min, 45°C).
Glass: Gentle wash for delicate glassware (40°C).
Rinse: Rinse only, no detergent (for postponed washing).

WARNING! Do not open door during hot wash phases; steam may cause burns.

Maintenance & Care

Regular maintenance ensures longevity and performance.

Clean filter: Remove and rinse under water weekly.
Check spray arms: Ensure holes are not clogged; rotate freely.
Refill salt: When indicator lights, add salt to container (use funnel).
Refill rinse aid: Adjust dispenser dial based on water hardness (1-5).
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Monthly cleaning: Run empty cycle with dishwasher cleaner or vinegar.

CAUTION! Unplug before any maintenance. Do not use sharp objects to clean spray arms.

Regulatory Information

CE compliant; meets EU energy labeling and ecodesign requirements. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher not starting	Power, door, child lock	Check plug, ensure door closed properly, disable child lock.
Poor cleaning results	Loading, detergent, filter	Rearrange load, use correct detergent amount, clean filter.
Water not draining	Drain hose blockage	Check hose for kinks/blockages; clean filter.
Salt indicator remains on	Salt container empty	Refill with dishwasher salt; run rinse cycle.
Unusual noise	Spray arm obstruction	Check for items blocking spray arm; ensure properly seated.
Leaking water	Hose connections, door seal	Tighten inlet/drain hoses; check door seal for debris/damage.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com